Tunnel Lighting Design Procedures

Tunnel Lighting Design Procedures
Author: Vincent P. Gallagher
Publisher:
Total Pages: 36
Release: 1985
Genre: Tunnels
ISBN:

Tunnels commonly create bottlenecks in traffic flow because of a change in cross-sectional width and a discontinuing of road shoulders past the portal. The effect of these restrictions can be congestion and high accident rates unless an adequate lighting system is provided to reveal the locations of walls and curbings. The problem is most accute in daytime, when drivers make the transition from a brightly illuminated exterior roadway to the tunnel interior with a much lower luminance level. To facilitate the design of a lighting installation which will allow for this transition, it is convenient to consider tunnels as being made up of 5 zones: 1) the approach zone, 2) the threshold zone, 3) the transition zone, 4) the interior zone, and 5) the exit zone. Each of these zones has specific lighting levels and lengths depending on the tunnel wall materials, tunnel dimensions, wall color, portal landscaping, and traffic characteristics. Luminance requirements can vary from 100 fL to 250 fL depending on the tunnel orientation with the sun.

Transportation Tunnels

Transportation Tunnels
Author: S. Ponnuswamy
Publisher: CRC Press
Total Pages: 385
Release: 2017-12-21
Genre: Technology & Engineering
ISBN: 1315349302

Transportation Tunnels, 2nd Edition provides a comprehensive text on tunneling and tunnel engineering applicable in general to all types of tunnels, with more detailed information on highway and railway tunnels. While the First Edition of the book was confined to deal with railway and highway tunnels, the Second Edition is also extensively considering the latest trends in use of tunnels in different other fields. The book has been revised to provide coverage of water conveyance, navigation and material conveyance tunnels also and deals with these subjects in more detail. It covers all aspects of investigation, design, construction, monitoring and maintenance of tunnels. Special emphasis has been laid on the geotechnical investigations, interpretation of findings and relating the same to the design as well as the construction of tunnels. The book reflects the advancements in the knowledge of ground behaviour and rock mechanics and also in construction technology, including use of TBM in the last two decades. It covers in sufficient detail the basic requirements of tunnel profile, the geometric parameters, clearance requirements, aerodynamics, and cost economics in fixing alignments with different design parameters like curvature, gradient and operational requirements. It discusses in detail alternative forms of the cross section / profile and illustrates design methodology with examples. The different methodologies that have been used in the past using timber or steel supports by stage wise expansion of cross sections and modern methodologies used for boring full profile using new tunneling methods and Tunnel Boring Machines are also comprehensively discussed. Requirements of tunnels in respect of ventilation, lighting and drainage are adequately covered. Separate chapters have been included on ‘Instrumentation’ and ‘Tunnel Inspection and Maintenance’. The expanded text on the use and advantages of methodologies and equipment for dealing with various aspects of construction of tunnels is based on observations through site visits, discussions with, and experiences of people as recorded on large number of tunneling works which have been taken up recently for railways, highways and urban transport subway projects. The book can serve as a textbook for undergraduate and graduate students and as a reference book for practicing engineers.

Roadway Lighting Handbook

Roadway Lighting Handbook
Author: United States. Federal Highway Administration. Office of Traffic Operations
Publisher:
Total Pages: 268
Release: 1978
Genre: Roads
ISBN:

Tunnel Engineering Handbook

Tunnel Engineering Handbook
Author: Thomas R. Kuesel
Publisher: Springer Science & Business Media
Total Pages: 559
Release: 2012-12-06
Genre: Technology & Engineering
ISBN: 1461304490

The Tunnel Engineering Handbook, Second Edition provides, in a single convenient volume, comprehensive coverage of the state of the art in the design, construction, and rehabilitation of tunnels. It brings together essential information on all the principal classifications of tunnels, including soft ground, hard rock, immersed tube and cut-and-cover, with comparisons of their relative advantages and suitability. The broad coverage found in the Tunnel Engineering Handbook enables engineers to address such critical questions as how tunnels are planned and laid out, how the design of tunnels depends on site and ground conditions, and which types of tunnels and construction methods are best suited to different conditions. Written by the leading engineers in the fields, this second edition features major revisions from the first, including: * Complete updating of all chapters from the first edition * Seven completely new chapters covering tunnel stabilization and lining, difficult ground, deep shafts, water conveyance tunnels, small diameter tunnels, fire life safety, tunnel rehabilitation and tunnel construction contracting *New coverage of the modern philosophy and techniques of tunnel design and tunnel construction contracting The comprehensive coverage of the Tunnel Engineering Handbook makes it an essential resource for all practicing engineers engaged in the design of tunnels and underground construction. In addition, the book contains a wealth of information that government administrators and planners and transportation officials will use in the planning and management of tunnels.

Roadway Lighting Design Guide

Roadway Lighting Design Guide
Author: American Association of State Highway and Transportation Officials
Publisher: AASHTO
Total Pages: 134
Release: 2005
Genre: Technology & Engineering
ISBN: 156051325X

This guide replaces the 1984 publication entitled An Informational Guide for Roadway Lighting. It has been revised and brought up to date to reflect current practices in roadway lighting. The guide provides a general overview of lighting systems from the point of view of the transportation departments and recommends minimum levels of quality. The guide incorporates the illuminance and luminance design methods, but does not include the small target visibility (STV) method.