The Scientific Basis of Flocculation

The Scientific Basis of Flocculation
Author: K.J. Ives
Publisher: Springer Science & Business Media
Total Pages: 370
Release: 2012-12-06
Genre: Science
ISBN: 9400999380

K.J. Ives Professor of Public Health Engineering University College London The aggregation of small particles in liquids, to form flocs which are large enough to settle, or to be filtered, is a common operation in industrial processes, and water and wastewater treatment. This aggregation, given the general title flliocculation in this book, may be brought about by the addition of chemicals to reduce the stability of the original suspension, by neutralising electrical forces of repulsion, by the addition of chemicals (polymers) to link particles by bridging action, by the addition of chemicals which form particles to increase collision proba bilities, and by the input of energy leading to hydrodynamically induced collisions. The particles undergoing flocculation may range from colloidal in the nanometer size range, through micro scopic (micron) size, up to visible particles in the millimeter size range; that is a total size range of six orders of magnitude. Consequently the colloid chemist and the hydrodynamicist are both concerned with the interactions that take place, and to them the engineer must turn, to obtain the fundamental information ne cessary for the process design and its associated hardware.

Encyclopedia of Colloid and Interface Science

Encyclopedia of Colloid and Interface Science
Author: Tharwat Tadros
Publisher: Springer
Total Pages: 0
Release: 2013-06-28
Genre: Technology & Engineering
ISBN: 9783642206641

An authoritative and comprehensive reference relevant to all scientists and engineers in the field. This encyclopedia not only helps chemistry, materials science and physics researchers to understand the principles, but also provides practicing engineers with the necessary information for implementing practical applications, such as Food and agrochemicals Polymers and ceramics Cosmetics and detergents Paints and coatings Pharmaceuticals and drug delivery In addition, the encyclopedia is an important reference for industrial chemists and chemical engineers faced with a multitude of industrial systems of a colloidal nature. As wide as the range of applications that colloid and interface science has is the range of scientific disciplines that contribute to research and development in this field. These encompass chemistry, physics, biology and mathematics as well as nanoscience and nanotechnology. The encyclopedia provides easy-to-digest information for meeting these interdisciplinary challenges. While providing numerous concise definitions of key terms, the encyclopedia also features more than forty in-depth essays on topics ranging from Agrochemical Formulations to Zeta Potential. All entries are cross-referenced and include selected references to original literature as well as synonyms.

The Scientific Basis of Flotation

The Scientific Basis of Flotation
Author: K.J. Ives
Publisher: Springer Science & Business Media
Total Pages: 430
Release: 2012-12-06
Genre: Science
ISBN: 9400969260

K.J.Ives Professor of Public Health Engineering University College London Industrial application of the use of bubbles to float fine particles in water began before the beginning of this century, in the field of mineral processing. Such bubble flotation was applied very little outside mineral processing, until about 1960 when the dissolved air process, which has already had some success in the pulp and paper industry, was applied to water and wastewater treatment. The subsequent two decades saw not only a growth development for water and wastewater treatment, but also a growing cognisance of the similarities that existed with mineral processing flotation. Therefore the time seemed ripe in 1982 for a joint meeting between experts in these two major fields of flotation to put together the Scientific Basis of Flotation in the form of a NATO Advanced Study Institute. Attended by about 60 specialists, mainly post doctoral, from 17 countries, this Study Institute in residence for two weeks in Christ's College, Cambridge (UK) heard presentations from several international experts, principally the 8 co-authors of this book. The integration of the various scientific disciplines of physics, physical chemistry, colloid science, hydrodynamics and process engineering showed where the common basiS, and occasional important differences, of flotation could be applied to mineral processing, water and wastewater treatment, and indeed some other process industries (for example: pharmaceuticals, and food manufacture).

Coagulation and Flocculation in Water and Wastewater Treatment

Coagulation and Flocculation in Water and Wastewater Treatment
Author: John Bratby
Publisher: IWA Publishing
Total Pages: 421
Release: 2006-10-15
Genre: Science
ISBN: 1843391066

Coagulation and Flocculation in Water and Wastewater Treatment provides a comprehensive account of coagulation and flocculation techniques and technologies in a single volume covering theoretical principles to practical applications. Thoroughly revised and updated since the 1st Edition it has been progressively modified and increased in scope to cater for the requirements of practitioners involved with water and wastewater treatment. A thorough gamut of treatment scenarios is attempted, including turbidity, color and organics removal, including the technical aspects of enhanced coagulation. The effects of temperature and ionic content are described as well as the removal of specific substances such as arsenic and phosphorus. Chemical phosphorus removal is dealt with in detail, Rapid mixing for efficient coagulant utilization, and flocculation are dealt with in specific chapters. Water treatment plant waste sludge disposal is dealt with in considerable detail, in an Appendix devoted to this subject. Invaluble for water scientists, engineers and students of this field, Coagulation and Flocculation in Water and Wastewater Treatment is a convenient reference handbook in the form of numerous examples and appended information.

Encyclopedia of Chemical Processing and Design

Encyclopedia of Chemical Processing and Design
Author: John J. McKetta Jr
Publisher: CRC Press
Total Pages: 442
Release: 1992-08-20
Genre: Science
ISBN: 9780824724917

"Written by engineers for engineers (with over 150 International Editorial Advisory Board members),this highly lauded resource provides up-to-the-minute information on the chemical processes, methods, practices, products, and standards in the chemical, and related, industries. "

Unit Operations Handbook

Unit Operations Handbook
Author: John J. McKetta Jr
Publisher: CRC Press
Total Pages: 768
Release: 1992-09-24
Genre: Science
ISBN: 9780824786700

Emphasizes the design, control, and functioning of various unit operations - offering shortcut methods of calculation along with computer and nomographic solution techniques. Provides practical sections on conversion to and from SI units and cost indexes for quick updating of all cost information.;This book should be of interest to mechanical, chemical, process design, project, and materials engineers and continuing-education courses in these disciplines.

Flocs in Water Treatment

Flocs in Water Treatment
Author: David H. Bache
Publisher: IWA Publishing
Total Pages: 309
Release: 2007-11-08
Genre: Science
ISBN: 1843390639

Flocs in Water Treatment is the first of its kind - serving as a valuable aide-mémoire for scientists, process engineers and other professionals engaged in water treatment. The framework described in Flocs in Water Treatment can also be applied to aggregated solids found both in the natural environment, and within a broad range of industries. Flocs (aggregated solid matter) resulting from the combined influence of coagulation and flocculation play a vital role in solid-liquid separation processes. The design and operation of water treatment plants demands a proper understanding of the ways in which flocs affect treatment systems and how their properties can be manipulated to increase treatment efficiency. Flocs in Water Treatment provides a comprehensive account of the ways in which flocs are formed, their characterization, and how they behave in practice. Flocs are complex entities, whose properties defy easy description and measurement. In spite of this, the authors provide a clear and discerning account of the current state of knowledge; this is rooted in science and draws on many disciplines. Based on their experiences in research and the workings of full scale treatment plants, the authors offer candid advice on tasks such as the measurement of floc properties and guidance on problems involving the use of chemicals for controlling floc properties within treatment systems.

Flotation Science and Engineering

Flotation Science and Engineering
Author: K.A. Matis
Publisher: CRC Press
Total Pages: 580
Release: 1994-09-29
Genre: Science
ISBN: 9780824792640

"Discusses the origin of flotation in mineral processing, describes the application of new flotation theories, and considers various alternative techniques, including flocculation and solvent sublation. Contains authoritative contributions from more than 45 international experts."