Turbulent Flows

Turbulent Flows
Author: Jean Piquet
Publisher: Springer Science & Business Media
Total Pages: 767
Release: 2013-04-17
Genre: Technology & Engineering
ISBN: 3662035596

obtained are still severely limited to low Reynolds numbers (about only one decade better than direct numerical simulations), and the interpretation of such calculations for complex, curved geometries is still unclear. It is evident that a lot of work (and a very significant increase in available computing power) is required before such methods can be adopted in daily's engineering practice. I hope to l"Cport on all these topics in a near future. The book is divided into six chapters, each· chapter in subchapters, sections and subsections. The first part is introduced by Chapter 1 which summarizes the equations of fluid mechanies, it is developed in C~apters 2 to 4 devoted to the construction of turbulence models. What has been called "engineering methods" is considered in Chapter 2 where the Reynolds averaged equations al"C established and the closure problem studied (§1-3). A first detailed study of homogeneous turbulent flows follows (§4). It includes a review of available experimental data and their modeling. The eddy viscosity concept is analyzed in §5 with the l"Csulting ~alar-transport equation models such as the famous K-e model. Reynolds stl"Css models (Chapter 4) require a preliminary consideration of two-point turbulence concepts which are developed in Chapter 3 devoted to homogeneous turbulence. We review the two-point moments of velocity fields and their spectral transforms (§ 1), their general dynamics (§2) with the particular case of homogeneous, isotropie turbulence (§3) whel"C the so-called Kolmogorov's assumptions are discussed at length.

Modeling and Simulation of Turbulent Flows

Modeling and Simulation of Turbulent Flows
Author: Roland Schiestel
Publisher: John Wiley & Sons
Total Pages: 751
Release: 2010-01-05
Genre: Science
ISBN: 0470393467

This title provides the fundamental bases for developing turbulence models on rational grounds. The main different methods of approach are considered, ranging from statistical modelling at various degrees of complexity to numerical simulations of turbulence. Each of these various methods has its own specific performances and limitations, which appear to be complementary rather than competitive. After a discussion of the basic concepts, mathematical tools and methods for closure, the book considers second order closure models. Emphasis is placed upon this approach because it embodies potentials for clarifying numerous problems in turbulent shear flows. Simpler, generally older models are then presented as simplified versions of the more general second order models. The influence of extra physical parameters is also considered. Finally, the book concludes by examining large Eddy numerical simulations methods. Given the book’s comprehensive coverage, those involved in the theoretical or practical study of turbulence problems in fluids will find this a useful and informative read.

Fundamentals Of Turbulence Modelling

Fundamentals Of Turbulence Modelling
Author: Ching Jen Chen
Publisher: CRC Press
Total Pages: 312
Release: 1997-12-01
Genre: Technology & Engineering
ISBN: 9781560324058

Focuses on the second-order turbulence-closure model and its applications to engineering problems. Topics include turbulent motion and the averaging process, near-wall turbulence, applications of turbulence models, and turbulent buoyant flows.

Advances In Turbulence

Advances In Turbulence
Author: Stanley Corrsin
Publisher: CRC Press
Total Pages: 256
Release: 1988-10-01
Genre: Technology & Engineering
ISBN: 9780891167471

Based on a symposium held in June 1986 in Minneapolis, USA, this volume surveys current information on turbulence measurement and modelling, computational fluid mechanics, vortex flow and physical modelling, cavitation and two-phase flow, bluff body flow and fluid structure interaction.

Turbulent Shear Flows 7

Turbulent Shear Flows 7
Author: Franz Durst
Publisher: Springer Science & Business Media
Total Pages: 370
Release: 2012-12-06
Genre: Science
ISBN: 3642760872

The Seventh Symposium was held on the campus of Stanford University with·a combination offacilities and weather which made it possible to add open-air poster sessions and coffee breaks to the programme. This was particularly convenient as the call for papers attracted close to three hundred abstracts and a total number of participants well in excess of this number. Some one hundred and thirty papers were presented in carefully phased parallel sessions and thirty six further contributions were made available in the form of posters. In addition, a lively open-forum session allowed additional speakers to make brief presentations. The staff of the Thermo-Sciences Division of the Department of Mechanical Engineering at Stanford undertook the local arrangements with evident success and their extensive record of contributions to Turbulent Shear Flows made the venue particularly appropriate. Also, the Centre for Turbulence Studies, based on the faculty of the University and the NASA Ames Research Center, provided a considerable body of expertise with emphasis on direct numerical stimulation.

Turbulent Shear Flows I

Turbulent Shear Flows I
Author: F. Durst
Publisher: Springer Science & Business Media
Total Pages: 415
Release: 2012-12-06
Genre: Technology & Engineering
ISBN: 3642463959

The present book contains papers that have been selected from contributions to the First International Symposium on Turbulent Shear Flows which was held from the 18th to 20th April 1977 at The Pennsylvania State University, University Park, Pennsylvania, USA. Attend ees from close to 20 countries presented over 100 contributions at this meeting in which many aspects of the current activities in turbulence research were covered. Five topics received particular attention at the Symposium: Free Flows Wall Flows Recirculating Flows Developments in Reynolds Stress Closures New Directions in Modeling This is also reflected in the five chapters of this book with contributions from research workers from different countries. Each chapter covers the most valuable contributions of the conference to the particular chapter topic. Of course, there were many additional good con tributions to each subject at the meeting but the limitation imposed on the length of this volume required that a selection be made. The realization of the First International Symposium on Turbulent Shear Flows was p- sible by the general support of: U. S. Army Research Office U. S. Navy Research Office Continuing Education Center of The Pennsylvania State University The conference organization was carried out by the organizing committee consisting of: F. Durst, Universitat Karlsruhe, Karlsruhe, Fed. Rep. of Germany V. W. Goldschmidt, Purdue University, West Lafayette, Ind. , USA B. E. Launder, University of California, Davis, Calif. , USA F. W. Schmidt, Pennsylvania State University, University Park, Penna.