Numerical Simulation of Unsteady Flows and Transition to Turbulence

Numerical Simulation of Unsteady Flows and Transition to Turbulence
Author: O. Pironneau
Publisher: Cambridge University Press
Total Pages: 536
Release: 1992-07-31
Genre: Mathematics
ISBN: 9780521416184

The workshop concentrated on the following turbulence test cases: T1 Boundary layer in an S-shaped duct; T2 Periodic array of cylinders in a channel; T3 Transition in a boundary layer under the influence of free-stream turbulence; T4 & T5: Axisymmetric confined jet flows.

New Results in Numerical and Experimental Fluid Mechanics XII

New Results in Numerical and Experimental Fluid Mechanics XII
Author: Andreas Dillmann
Publisher: Springer Nature
Total Pages: 862
Release: 2019-09-26
Genre: Technology & Engineering
ISBN: 3030252531

This book gathers contributions to the 21st biannual symposium of the German Aerospace Aerodynamics Association (STAB) and the German Society for Aeronautics and Astronautics (DGLR). The individual chapters reflect ongoing research conducted by the STAB members in the field of numerical and experimental fluid mechanics and aerodynamics, mainly for (but not limited to) aerospace applications, and cover both nationally and EC-funded projects. Special emphasis is given to collaborative research projects conducted by German scientists and engineers from universities, research-establishments and industries. By addressing a number of cutting-edge applications, together with the relevant physical and mathematics fundamentals, the book provides readers with a comprehensive overview of the current research work in the field. The book’s primary emphasis is on aerodynamic research in aeronautics and astronautics, and in ground transportation and energy as well.

Unsteady Computational Fluid Dynamics in Aeronautics

Unsteady Computational Fluid Dynamics in Aeronautics
Author: P.G. Tucker
Publisher: Springer Science & Business Media
Total Pages: 432
Release: 2013-08-30
Genre: Technology & Engineering
ISBN: 9400770499

The field of Large Eddy Simulation (LES) and hybrids is a vibrant research area. This book runs through all the potential unsteady modelling fidelity ranges, from low-order to LES. The latter is probably the highest fidelity for practical aerospace systems modelling. Cutting edge new frontiers are defined. One example of a pressing environmental concern is noise. For the accurate prediction of this, unsteady modelling is needed. Hence computational aeroacoustics is explored. It is also emerging that there is a critical need for coupled simulations. Hence, this area is also considered and the tensions of utilizing such simulations with the already expensive LES. This work has relevance to the general field of CFD and LES and to a wide variety of non-aerospace aerodynamic systems (e.g. cars, submarines, ships, electronics, buildings). Topics treated include unsteady flow techniques; LES and hybrids; general numerical methods; computational aeroacoustics; computational aeroelasticity; coupled simulations and turbulence and its modelling (LES, RANS, transition, VLES, URANS). The volume concludes by pointing forward to future horizons and in particular the industrial use of LES. The writing style is accessible and useful to both academics and industrial practitioners. From the reviews: "Tucker's volume provides a very welcome, concise discussion of current capabilities for simulating and modellng unsteady aerodynamic flows. It covers the various pos sible numerical techniques in good, clear detail and presents a very wide range of practical applications; beautifully illustrated in many cases. This book thus provides a valuable text for practicing engineers, a rich source of background information for students and those new to this area of Research & Development, and an excellent state-of-the-art review for others. A great achievement." Mark Savill FHEA, FRAeS, C.Eng, Professor of Computational Aerodynamics Design & Head of Power & Propulsion Sciences, Department of Power & Propulsion, School of Engineering, Cranfield University, Bedfordshire, U.K. "This is a very useful book with a wide coverage of many aspects in unsteady aerodynamics method development and applications for internal and external flows." L. He, Rolls-Royce/RAEng Chair of Computational Aerothermal Engineering, Oxford University, U.K. "This comprehensive book ranges from classical concepts in both numerical methods and turbulence modelling approaches for the beginner to latest state-of-the-art for the advanced practitioner and constitutes an extremely valuable contribution to the specific Computational Fluid Dynamics literature in Aeronautics. Student and expert alike will benefit greatly by reading it from cover to cover." Sébastien Deck, Onera, Meudon, France

Boundary Layer Flows

Boundary Layer Flows
Author: Vallampati Ramachandra Prasad
Publisher: BoD – Books on Demand
Total Pages: 236
Release: 2020-01-22
Genre: Mathematics
ISBN: 1839681853

Written by experts in the field, this book, "Boundary Layer Flows - Theory, Applications, and Numerical Methods" provides readers with the opportunity to explore its theoretical and experimental studies and their importance to the nonlinear theory of boundary layer flows, the theory of heat and mass transfer, and the dynamics of fluid. With the theory's importance for a wide variety of applications, applied mathematicians, scientists, and engineers - especially those in fluid dynamics - along with engineers of aeronautics, will undoubtedly welcome this authoritative, up-to-date book.

Turbulence Models and Their Application

Turbulence Models and Their Application
Author: Tuncer Cebeci
Publisher: Springer Science & Business Media
Total Pages: 140
Release: 2003-12-04
Genre: Science
ISBN: 9783540402886

After a brief review of the more popular turbulence models, the author presents and discusses accurate and efficient numerical methods for solving the boundary-layer equations with turbulence models based on algebraic formulas (mixing length, eddy viscosity) or partial-differential transport equations. A computer program employing the Cebeci-Smith model and the k-e model for obtaining the solution of two-dimensional incompressible turbulent flows without separation is discussed in detail and is presented in the accompanying CD.

Turbulence and Transition Modelling

Turbulence and Transition Modelling
Author: M. Hallbäck
Publisher: Springer Science & Business Media
Total Pages: 379
Release: 2013-03-09
Genre: Science
ISBN: 9401586667

The aim of this book is to give, within a single volume, an introduction to the fields of turbulence modelling and transition-to-turbulence prediction, and to provide the physical background for today's modelling approaches in these problem areas as well as giving a flavour of advanced use of prediction methods. Turbulence modelling approaches, ranging from single-point models based on the eddy-viscosity concept and the Reynolds stress transport equations (Chapters 3,4,5), to large-eddy simulation (LES) techniques (Ch. 7), are covered. The foundations of hydrodynamical stability and transition are presented (Ch. 2) along with transition prediction methods based on single-point closures (Ch. 6), LES techniques (Ch. 7) and the parabolized stability equations (Ch. 8). The book addresses engineers and researchers, in industry or academia, who are entering into the fields of turbulence or transition modelling research or need to apply turbulence or transition prediction methods in their work.

Instabilities of Flows and Transition to Turbulence

Instabilities of Flows and Transition to Turbulence
Author: Tapan K. Sengupta
Publisher: CRC Press
Total Pages: 528
Release: 2012-04-24
Genre: Science
ISBN: 1439879443

Addressing classical material as well as new perspectives, Instabilities of Flows and Transition to Turbulence presents a concise, up-to-date treatment of theory and applications of viscous flow instability. It covers materials from classical instability to contemporary research areas including bluff body flow instability, mixed convection flows, and application areas of aerospace and other branches of engineering. Transforms and perturbation techniques are used to link linear instability with receptivity of flows, as developed by the author. The book: Provides complete coverage of transition concepts, including receptivity and flow instability Introduces linear receptivity using bi-lateral Fourier-Laplace transform techniques Presents natural laminar flow (NLF) airfoil analysis and design as a practical application of classical and bypass transition Distinguishes strictly between instability and receptivity, which leads to identification of wall- and free stream-modes Describes energy-based receptivity theory for the description of bypass transitions Instabilities of Flows and Transition to Turbulence has evolved into an account of the personal research interests of the author over the years. A conscious effort has been made to keep the treatment at an elementary level requiring rudimentary knowledge of calculus, the Fourier-Laplace transform, and complex analysis. The book is equally amenable to undergraduate students, as well as researchers in the field.

High Performance Computing in Science and Engineering ́16

High Performance Computing in Science and Engineering ́16
Author: Wolfgang E. Nagel
Publisher: Springer
Total Pages: 666
Release: 2017-01-11
Genre: Computers
ISBN: 3319470663

This book presents the state-of-the-art in supercomputer simulation. It includes the latest findings from leading researchers using systems from the High Performance Computing Center Stuttgart (HLRS) in 2016. The reports cover all fields of computational science and engineering ranging from CFD to computational physics and from chemistry to computer science with a special emphasis on industrially relevant applications. Presenting findings of one of Europe’s leading systems, this volume covers a wide variety of applications that deliver a high level of sustained performance. The book covers the main methods in high-performance computing. Its outstanding results in achieving the best performance for production codes are of particular interest for both scientists and engineers. The book comes with a wealth of color illustrations and tables of results.