Annual Energy Outlook 2016 With Projections to 2040

Annual Energy Outlook 2016 With Projections to 2040
Author: Energy Dept., Energy Information Administration
Publisher: Government Printing Office
Total Pages: 260
Release: 2017-02-15
Genre: Business & Economics
ISBN: 9780160934827

The Annual Energy Outlook 2016 presents long-term projections of energy supply, demand, and prices through 2040. The projections, focused on U.S. energy markets, are based on results from EIA's National Energy Modeling System which enables EIA to make projections under alternative, internally consistent sets of assumptions.

Air Pollution Control Engineering

Air Pollution Control Engineering
Author: Lawrence K. Wang
Publisher: Springer Science & Business Media
Total Pages: 514
Release: 2004-07-02
Genre: Science
ISBN: 1592597785

A panel of respected air pollution control educators and practicing professionals critically survey the both principles and practices underlying control processes, and illustrate these with a host of detailed design examples for practicing engineers. The authors discuss the performance, potential, and limitations of the major control processes-including fabric filtration, cyclones, electrostatic precipitation, wet and dry scrubbing, and condensation-as a basis for intelligent planning of abatement systems,. Additional chapters critically examine flare processes, thermal oxidation, catalytic oxidation, gas-phase activated carbon adsorption, and gas-phase biofiltration. The contributors detail the Best Available Technologies (BAT) for air pollution control and provide cost data, examples, theoretical explanations, and engineering methods for the design, installation, and operation of air pollution process equipment. Methods of practical design calculation are illustrated by numerous numerical calculations.

Twentieth-Century Building Materials

Twentieth-Century Building Materials
Author: Thomas C. Jester
Publisher: Getty Publications
Total Pages: 354
Release: 2014-08-01
Genre: Architecture
ISBN: 1606063251

Over the concluding decades of the twentieth century, the historic preservation community increasingly turned its attention to modern buildings, including bungalows from the 1930s, gas stations and diners from the 1940s, and office buildings and architectural homes from the 1950s. Conservation efforts, however, were often hampered by a lack of technical information about the products used in these structures, and to fill this gap Twentieth-Century Building Materials was developed by the U.S. Department of the Interior’s National Park Service and first published in 1995. Now, this invaluable guide is being reissued—with a new preface by the book’s original editor. With more than 250 illustrations, including a full-color photographic essay, the volume remains an indispensable reference on the history and conservation of modern building materials. Thirty-seven essays written by leading experts offer insights into the history, manufacturing processes, and uses of a wide range of materials, including glass block, aluminum, plywood, linoleum, and gypsum board. Readers will also learn about how these materials perform over time and discover valuable conservation and repair techniques. Bibliographies and sources for further research complete the volume. The book is intended for a wide range of conservation professionals including architects, engineers, conservators, and material scientists engaged in the conservation of modern buildings, as well as scholars in related disciplines.

Cement Production Technology

Cement Production Technology
Author: Anjan Kumar Chatterjee
Publisher: CRC Press
Total Pages: 484
Release: 2018-04-27
Genre: Technology & Engineering
ISBN: 1351335731

The book is an outcome of the author’s active professional involvement in research, manufacture and consultancy in the field of cement chemistry and process engineering. This multidisciplinary title on cement production technology covers the entire process spectrum of cement production, starting from extraction and winning of natural raw materials to the finished products including the environmental impacts and research trends. The book has an overtone of practice supported by the back-up principles.

Integrated Solid Waste Management: A Lifecycle Inventory

Integrated Solid Waste Management: A Lifecycle Inventory
Author: P.R. White
Publisher: Springer Science & Business Media
Total Pages: 374
Release: 2012-12-06
Genre: Science
ISBN: 1461523699

Life is often considered to be a journey. The lifecycle of waste can similarly be considered to be a journey from the cradle (when an item becomes valueless and, usually, is placed in the dustbin) to the grave (when value is restored by creating usable material or energy; or the waste is transformed into emissions to water or air, or into inert material placed in a landfill). This preface provides a route map for the journey the reader of this book will undertake. Who? Who are the intended readers of this book? Waste managers (whether in public service or private companies) will find a holistic approach for improving the environmental quality and the economic cost of managing waste. The book contains general principles based on cutting edge experience being developed across Europe. Detailed data and a computer model will enable operations managers to develop data-based improvements to their systems. Producers oj waste will be better able to understand how their actions can influence the operation of environmentally improved waste management systems. Designers oj products and packages will be better able to understand how their design criteria can improve the compatibility of their product or package with developing, environmentally improved waste management systems. Waste data specialists (whether in laboratories, consultancies or environ mental managers of waste facilities) will see how the scope, quantity and quality of their data can be improved to help their colleagues design more effective waste management systems.

Introduction to Glass Science and Technology

Introduction to Glass Science and Technology
Author: James E Shelby
Publisher: Royal Society of Chemistry
Total Pages: 320
Release: 2015-11-06
Genre: Technology & Engineering
ISBN: 1782625119

This book provides a concise and inexpensive introduction for an undergraduate course in glass science and technology. The level of the book has deliberately been maintained at the introductory level to avoid confusion of the student by inclusion of more advanced material, and is unique in that its text is limited to the amount suitable for a one term course for students in materials science, ceramics or inorganic chemistry. The contents cover the fundamental topics of importance in glass science and technology, including glass formation, crystallization, phase separation and structure of glasses. Additional chapters discuss the most important properties of glasses, including discussion of physical, optical, electrical, chemical and mechanical properties. A final chapter provides an introduction to a number of methods used to form technical glasses, including glass sheet, bottles, insulation fibre, optical fibres and other common commercial products. In addition, the book contains discussion of the effects of phase separation and crystallization on the properties of glasses, which is neglected in other texts. Although intended primarily as a textbook, Introduction to Glass Science and Technology will also be invaluable to the engineer or scientist who desires more knowledge regarding the formation, properties and production of glass.

Small-scale Aquaponic Food Production

Small-scale Aquaponic Food Production
Author: Christopher Somerville
Publisher: Fao
Total Pages: 0
Release: 2015
Genre: Aquaponics
ISBN: 9789251085325

This technical paper begins by introducing the concept of aquaponics, including a brief history of its development and its place within the larger category of soil-less culture and modern agriculture. It discusses the main theoretical concepts of aquaponics, including the nitrogen cycle and the nitrification process, the role of bacteria, and the concept of balancing an aquaponic unit. It then moves on to cover important considerations of water quality parameters, water testing, and water sourcing for aquaponics, as well as methods and theories of unit design, including the three main methods of aquaponic systems: media beds, nutrient film technique, and deep water culture. The publication discusses in detail the three groups of living organisms (bacteria, plants and fish) that make up the aquaponic ecosystem. It also presents management strategies and troubleshooting practices, as well as related topics, specifically highlighting local and sustainable sources of aquaponic inputs. The publication also includes nine appendixes that present other key topics: ideal conditions for common plants grown in aquaponics; chemical and biological controls of common pests and diseases including a compatible planting guide; common fish diseases and related symptoms, causes and remedies; tools to calculate the ammonia produced and biofiltration media required for a certain fish stocking density and amount of fish feed added; production of homemade fish feed; guidelines and considerations for establishing aquaponic units; a cost-benefit analysis of a small-scale, media bed aquaponic unit; a comprehensive guide to building small-scale versions of each of the three aquaponic methods; and a brief summary of this publication designed as a supplemental handout for outreach, extension and education.

Materials, Design, and Manufacturing for Sustainable Environment

Materials, Design, and Manufacturing for Sustainable Environment
Author: Santhakumar Mohan
Publisher: Springer Nature
Total Pages: 909
Release: 2021-02-06
Genre: Technology & Engineering
ISBN: 9811598096

This book comprises the select proceedings of the International Conference on Materials, Design and Manufacturing for Sustainable Environment (ICMDMSE 2020). The primary focus is on emerging materials and cutting-edge manufacturing technologies for sustainable environment. The book covers a wide range of topics such as advanced materials, vibration, tribology, finite element method (FEM), heat transfer, fluid mechanics, energy engineering, additive manufacturing, robotics and automation, automobile engineering, industry 4.0, MEMS and nanotechnology, optimization techniques, condition monitoring, and new paradigms in technology management. Contents of this book will be useful to students, researchers, and practitioners alike.