Beginner’s Guide to Flux Crystal Growth

Beginner’s Guide to Flux Crystal Growth
Author: Makoto Tachibana
Publisher: Springer
Total Pages: 138
Release: 2017-10-26
Genre: Science
ISBN: 4431565876

This book introduces the principles and techniques of crystal growth by the flux method, which is arguably the most useful way to obtain millimeter- to centimeter-sized single crystals for physical research. As it is possible to find an appropriate solvent (“flux”) for nearly all inorganic materials, the flux method can be applied to the growth of many crystals ranging from transition metal oxides to intermetallic compounds. Both important principles and experimental procedures are described in a clear and accessible manner. Practical advice on various aspects of the experiment, which is not readily available in the literature, will assist the beginning graduate students in setting up the lab and conducting successful crystal growth. The mechanisms of crystal growth at an elementary level are also provided to better understand the techniques and to help in assessing the quality of the crystals. The book also contains many photographs of beautiful crystals with important physical properties of current interest, such as high-temperature superconductors, strongly correlated electronic systems, topological insulators, relaxor ferroelectrics, low-dimensional quantum magnets, non-linear optical materials, and multiferroics.

Gallium in Nuclear Reactors

Gallium in Nuclear Reactors
Author: Robert Isaac Jaffee
Publisher:
Total Pages: 40
Release: 1952
Genre: Corrosion resistant alloys
ISBN:

The unusual operating conditions of nuclear power reactors necessitate the use of unusual coolants. Thus, one desires a coolant which possess a low cross section for absorbing neutrons, good heat-transfer efficiency, a low melting point and a high boiling point. The element gallium possesses some of the requisite properties. It is a unique material, having a very low melting point, and a very high boiling point. Being a liquid metal, the heat transfer characteristics would be good, though not so good as those of some other liquid metals. The absorption cross section of gallium is rather high, which is a severe handicap. Since the cross section might be reduced by proper alloying, and since good coolants need be present in the reactor in only relatively small amounts, one cannot rule out the use of gallium on account of its cross section alone. Since gallium had some promise as a reactor coolant, research on the subject was merited.

Gallium in Nuclear Reactors

Gallium in Nuclear Reactors
Author:
Publisher:
Total Pages: 39
Release: 1949
Genre:
ISBN:

The unusual operating conditions of nuclear power reactors necessitate the use of unusual coolants. Thus, one desires a coolant which possess a low cross section for absorbing neutrons, good heat-transfer efficiency, a low melting point and a high boiling point. The element gallium possesses some of the requisite properties. It is a unique material, having a very low melting point, and a very high boiling point. Being a liquid metal, the heat transfer characteristics would be good, though not so good as those of some other liquid metals. The absorption cross section of gallium is rather high, which is a severe handicap. Since the cross section might be reduced by proper alloying, and since good coolants need be present in the reactor in only relatively small amounts, one cannot rule out the use of gallium on account of its cross section alone. Since gallium had some promise as a reactor coolant, research on the subject was merited.