Tractor-Implement Systems

Tractor-Implement Systems
Author: Ralph Alcock
Publisher: Springer Science & Business Media
Total Pages: 171
Release: 2012-12-06
Genre: Science
ISBN: 1468468790

Agriculture has benefited considerably from the wide-scale use of tractors and associated implements. Tractors have developed along two, at times contradictory, design paths. The first of these has resulted in functional improvements to the vehicle, making it capable of im proved performance in the often harsh environmental conditions in which it is required to operate. For example, agricultural tires have improved the versatility of tractors by allowing them to operate at relatively high speeds on a variety of terrains, and hydraulics have provided for flexibility in controlling and operating implements. It can also be seen that these particular functional design improvements have contributed significantly to the second design pathway, that of ergon omics, and the human-machine interface. Recent stress on the working environment for the tractor operator has led to design improvements relative to tractor cabs, the placement and labeling of controls, etc. This text discusses those factors relevant to the design, selection, and operation of tractor-implement systems. The audience for which it is intended is undergraduate and graduate students of agricultural engineering studying power and machinery. However, the text is suf ficiently applied to have relevance for those extension personnel in volved with advising farmers on the selection and operation of tractor implement combinations. The tractor cannot be regarded in isolation from the implement, nor from the environment in which both the tractor and implement are ix x Preface working.

Introduction to Agricultural Engineering Technology

Introduction to Agricultural Engineering Technology
Author: Harry Field
Publisher: Springer Science & Business Media
Total Pages: 395
Release: 2007-09-05
Genre: Technology & Engineering
ISBN: 0387369155

The third edition of this book exposes the reader to a wide array of engineering principles and their application to agriculture. It presents an array of more or less independent topics to facilitate daily assessments or quizzes, and aims to enhance the students' problem solving ability. Each chapter contains objectives, worked examples and sample problems are included at the end of each chapter. This book was first published in the late 60's by AVI. It remains relevant for post secondary classes in Agricultural Engineering Technology and Agricultural Mechanics, and secondary agriculture teachers.

The Farm Tractor

The Farm Tractor
Author: Bob Feller, Ralph W. Sanders
Publisher:
Total Pages: 388
Release:
Genre: Transportation
ISBN: 9781610605212

Here is the biggest, best, and most complete history of classic farm tractors. All North American models make their appearance--from John Deere and Farmall to fascinating "orphans" like the Steel Mule, from the late 1800s steamers through the high-powered workhorses of the 1970s. In addition to hundreds of high-detail large-format photography of tractors and equipment (see below for samples), the volume includes 100 color and black-and-white archival photos, advertising posters, and brochures. The result is an unparalleled look at the icon of American agriculture. Chapter 1: Muscles to Motors Chapter 2: Allis-Chalmers Chapter 3: J.I. Case Chapter 4: Caterpillar Chapter 5: John Deere Chapter 6: Ford Chapter 7: International Harvester Chapter 8: Massey-Ferguson Chapter 9: Minneapolis-Moline Chapter 10: Oliver Corporation Chapter 11: Orphans and Others

John Deere Evolution: The Design and Engineering of an American Icon

John Deere Evolution: The Design and Engineering of an American Icon
Author: Lee Klancher
Publisher:
Total Pages: 288
Release: 2021-06
Genre: Design
ISBN: 9781642340082

This beautiful book is an encyclopedic, behind-the-scenes look at how the machines were designed and built containing examples of every model line built by John Deere since 1919. Matching the strong visuals is an in-depth history that includes interviews with the engineers, industrial designers, and other Deere & Co. people who designed, built, and sold the machines.

Tractors and their Power Units

Tractors and their Power Units
Author: D. Smith
Publisher: Springer Science & Business Media
Total Pages: 474
Release: 2012-12-06
Genre: Science
ISBN: 1468466321

At the time of the writing of the fourth edirion of this textbook, the agricultural economy in the United States and Canada was depressed. The prices paid to farmers for their grain crops were very low, and consequently most farmers in North America could not afford to buy a new tractor when needed; there fore, the sales of tractors and other farm machines were much below normal. The farmer who was the victim of the depressed economy was forced to "make do." Instead of purchasing a new tractor when the old one needed to be replaced, the farmer usually purchased a used or second-hand tractor or repaired the old one. In a strict sense, tractors usually do not wear out; instead, they become obsolete. The farmer who owns an obsolete tractor would prefer to replace it with one having more power, more speeds, more conveniences, a better hydraulic system, lower operating cost, or all of the above. But farmers in the United States, Canada, and other industrial nations will continue to want to purchase tractors that have all of the features, in cluding microprocessors, found on other vehicles.

Tractor Wars

Tractor Wars
Author: Neil Dahlstrom
Publisher: BenBella Books
Total Pages: 0
Release: 2024-11-12
Genre: Business & Economics
ISBN: 1637744986

"Mr. Dahlstrom...has written a superb history of the tractor and this long-forgotten period of capitalism in U.S. agriculture. We now know the whole story of when farming, business and the free-market economy diverged, divided and conquered." —Wall Street Journal Discover the untold story of the “tractor wars,” the twenty-year period that introduced power farming—the most fundamental change in world agriculture in hundreds of years. Before John Deere, Ford, and International Harvester became icons of American business, they were competitors in a forgotten battle for the farm. From 1908-1928, against the backdrop of a world war and economic depression, these brands were engaged in a race to introduce the tractor and revolutionize farming. By the turn of the twentieth century, four million people had left rural America and moved to cities, leaving the nation’s farms shorthanded for the work of plowing, planting, cultivating, harvesting, and threshing. That’s why the introduction of the tractor is an innovation story as essential as man’s landing on the moon or the advent of the internet—after all, with the tractor, a shrinking farm population could still feed a growing world. But getting the tractor from the boardroom to the drafting table, then from factory and the farm, was a technological and competitive battle that until now, has never been fully told. A researcher, historian, and writer, Neil Dahlstrom has spent decades in the corporate archives at John Deere. In Tractor Wars, Dahlstrom offers an insider’s view of a story that entwines a myriad of brands and characters, stakes and plots: the Reverend Daniel Hartsough, a pastor turned tractor designer; Alexander Legge, the eventual president of International Harvester, a former cowboy who took on Henry Ford; William Butterworth and the oft-at-odds leadership team at John Deere that partnered with the enigmatic Ford but planned for his ultimate failure. With all the bitterness and drama of the race between Ford, Dodge, and General Motors, Tractor Wars is the untold story of industry stalwarts and disruptors, inventors, and administrators racing to invent modern agriculture—a power farming revolution that would usher in a whole new world.