Characterisation of Turbulent Duct Flows

Characterisation of Turbulent Duct Flows
Author: Bayode Owolabi
Publisher: Springer
Total Pages: 165
Release: 2019-05-31
Genre: Science
ISBN: 303019745X

This book presents several new findings in the field of turbulent duct flows, which are important for a range of industrial applications. It presents both high-quality experiments and cutting-edge numerical simulations, providing a level of insight and rigour rarely found in PhD theses. The scientific advancements concern the effect of the Earth’s rotation on large duct flows, the experimental confirmation of marginal turbulence in a pressure-driven square duct flow (previously only predicted in simulations), the identification of similar marginal turbulence in wall-driven flows using simulations (for the first time by any means) and, on a separate but related topic, a comprehensive experimental study on the phenomenon of drag reduction via polymer additives in turbulent duct flows. In turn, the work on drag reduction resulted in a correlation that provides a quantitative prediction of drag reduction based on a single, measurable material property of the polymer solution, regardless of the flow geometry or concentration. The first correlation of its kind, it represents an important advancement from both a scientific and practical perspective.

Laminar Flow Forced Convection in Ducts

Laminar Flow Forced Convection in Ducts
Author: R. K. Shah
Publisher: Academic Press
Total Pages: 492
Release: 2014-06-28
Genre: Technology & Engineering
ISBN: 1483191303

Laminar Flow Forced Convection in Ducts is a sourcebook for compact heat exchanger analytical data. This book describes the analytical solutions for laminar fluid flow and forced convection heat transfer in circular and noncircular pipes, including applicable differential equations and boundary conditions involving velocity and temperature problems of fluid flow. The book also discusses fluid flow—how much power is required to pump fluids through the heat exchanger, as well as the heat transfer—the determination of q" distribution, and the temperature of fluid and walls. The text also analyzes the coolant or heat transfer fluid flows in a nuclear power reactor composed of a bundle of circular section fuel rods located inside a round tube. R.A. Axford addresses fluid flow and heat transfers results for the rod bundle geometry in "Heat Transfer in Rod Bundles." The book also provides an overview and guidelines that can be used for the designer and the applied mathematician. This book is suitable for engineers working in electronics, aerospace, instrumentation, and biomechanics that use cooling or heating exchanges or solar collection systems.

Progress in Wall Turbulence 2

Progress in Wall Turbulence 2
Author: Michel Stanislas
Publisher: Springer
Total Pages: 430
Release: 2015-08-17
Genre: Technology & Engineering
ISBN: 3319203886

This is the proceedings of the ERCOFTAC Workshop on Progress in Wall Turbulence: Understanding and Modelling, that was held in Lille, France from June 18 to 20, 2014. The workshop brought together world specialists of near wall turbulence and stimulated exchanges between them around up-to-date theories, experiments, simulations and numerical models. This book contains a coherent collection of recent results on near wall turbulence including theory, new experiments, DNS and modeling with RANS, LES. The fact that both physical understanding and modeling by different approaches are addressed by the best specialists in a single workshop is original.

Direct and Large-Eddy Simulation IX

Direct and Large-Eddy Simulation IX
Author: Jochen Fröhlich
Publisher: Springer
Total Pages: 656
Release: 2015-01-27
Genre: Technology & Engineering
ISBN: 3319144480

This volume reflects the state of the art of numerical simulation of transitional and turbulent flows and provides an active forum for discussion of recent developments in simulation techniques and understanding of flow physics. Following the tradition of earlier DLES workshops, these papers address numerous theoretical and physical aspects of transitional and turbulent flows. At an applied level it contributes to the solution of problems related to energy production, transportation, magneto-hydrodynamics and the environment. A special session is devoted to quality issues of LES. The ninth Workshop on 'Direct and Large-Eddy Simulation' (DLES-9) was held in Dresden, April 3-5, 2013, organized by the Institute of Fluid Mechanics at Technische Universität Dresden. This book is of interest to scientists and engineers, both at an early level in their career and at more senior levels.

Bubbly Flows

Bubbly Flows
Author: Martin Sommerfeld
Publisher: Springer Science & Business Media
Total Pages: 354
Release: 2012-12-06
Genre: Science
ISBN: 3642185401

The book summarises the outcom of a priority research programme: 'Analysis, Modelling and Computation of Multiphase Flows'. The results of 24 individual research projects are presented. The main objective of the research programme was to provide a better understanding of the physical basis for multiphase gas-liquid flows as they are found in numerous chemical and biochemical reactors. The research comprises steady and unsteady multiphase flows in three frequently found reactor configurations, namely bubble columns without interiors, airlift loop reactors, and aerated stirred vessels. For this purpose new and improved measurement techniques were developed. From the resulting knowledge and data, new and refined models for describing the underlying physical processes were developed, which were used for the establishment and improvement of analytic as well as numerical methods for predicting multiphase reactors. Thereby, the development, lay-out and scale-up of such processes should be possible on a more reliable basis.

Direct and Large-Eddy Simulation I

Direct and Large-Eddy Simulation I
Author: Peter R. Voke
Publisher: Springer Science & Business Media
Total Pages: 454
Release: 1994-10-31
Genre: Technology & Engineering
ISBN: 9780792331063

It is a truism that turbulence is an unsolved problem, whether in scientific, engin eering or geophysical terms. It is strange that this remains largely the case even though we now know how to solve directly, with the help of sufficiently large and powerful computers, accurate approximations to the equations that govern tur bulent flows. The problem lies not with our numerical approximations but with the size of the computational task and the complexity of the solutions we gen erate, which match the complexity of real turbulence precisely in so far as the computations mimic the real flows. The fact that we can now solve some turbu lence in this limited sense is nevertheless an enormous step towards the goal of full understanding. Direct and large-eddy simulations are these numerical solutions of turbulence. They reproduce with remarkable fidelity the statistical, structural and dynamical properties of physical turbulent and transitional flows, though since the simula tions are necessarily time-dependent and three-dimensional they demand the most advanced computer resources at our disposal. The numerical techniques vary from accurate spectral methods and high-order finite differences to simple finite-volume algorithms derived on the principle of embedding fundamental conservation prop erties in the numerical operations. Genuine direct simulations resolve all the fluid motions fully, and require the highest practical accuracy in their numerical and temporal discretisation. Such simulations have the virtue of great fidelity when carried out carefully, and repre sent a most powerful tool for investigating the processes of transition to turbulence.

All Fluid-flow-regimes Simulation Model for Internal Flows

All Fluid-flow-regimes Simulation Model for Internal Flows
Author: John P. Abraham
Publisher: Nova Novinka
Total Pages: 0
Release: 2011
Genre: Laminar flow
ISBN: 9781611225037

A multi-regime fluid flow model for internal flows has been applied to several pipe and duct problems. The investigated flow regimes and inter-regime transformations include fully laminar and fully turbulent, laminarisation, and turbulentisation. The model auto-selects both the flow regimes and the inter-regime transformations. This book studies both steady and unsteady flows, as well as flows in pipes and ducts of both axially unchanging cross section and axially enlarging cross section.