Comparison of DC Motor Speed Control Performance using Fuzzy Logic and Model Predictive Control Method

Comparison of DC Motor Speed Control Performance using Fuzzy Logic and Model Predictive Control Method
Author: Mustefa Jibril
Publisher: GRIN Verlag
Total Pages: 6
Release: 2020-05-11
Genre: Computers
ISBN: 3346164152

Academic Paper from the year 2020 in the subject Computer Science - Miscellaneous, , language: English, abstract: The main target of this paper is to control the speed of DC motor by comparing the actual and the desired speed set point. The DC motor is designed using Fuzzy logic and MPC controllers. The comparison is made between the proposed controllers for the control target speed of the DC motor using square and white noise desired input signals with the help of Matlab/Simulink software. It has been realized that the design based on the fuzzy logic controller track the set pointwith the best steady state and transient system behavior than the design with MPC controller. Finally, the comparative simulation result prove the effectiveness of the DC motor with fuzzy logic controller.

Speed Control of DC Motor by Using Fuzzy Logic Controller

Speed Control of DC Motor by Using Fuzzy Logic Controller
Author: Khairul Afiq Zakaria
Publisher:
Total Pages: 61
Release: 2012
Genre: Fuzzy logic
ISBN:

The automatic control has played a vital role in the advance of engineering and science. Nowadays in industries, the control of direct current (DC) motor is a common practice thus the implementation of DC motor of controller speed is important. The main purpose of motor speed control is to keep the rotation of the motor at the present speed and to drive a system at the demand speed. The DC Series Wound Motor is very popular in industrial application and control systems because of the high torque density, high efficiency and small size. The main purpose of this project is to control speed of DC Series Wound Motor using four controllers which are PID, PI, P, and Fuzzy Logic Controller (FLC). Initially all the controllers are developed by using MATLAB simulink model. In this project, PID, PI, and P controller are developed and tuned in order to get faster step response and the Fuzzy Logic Controller (FLC) is design based on the membership function and the rule base. The expectation of this project is the Fuzzy Logic Controller will get the best performance compared to other controllers in terms of settling time (Ts), rise time (Tr), peak time (Tp), and percent overshoot (%OS). Finally a GUI of these controllers are developed which allow the users to select any controller and change its parameters according to the different conditions under loaded and unloaded scenarios.

DC Motor Speed Control with the Precence of Input Disturbance using Neural Network Based Model Reference and Predictive Controllers

DC Motor Speed Control with the Precence of Input Disturbance using Neural Network Based Model Reference and Predictive Controllers
Author: Mustefa Jibril
Publisher: GRIN Verlag
Total Pages:
Release: 2020-05-11
Genre: Computers
ISBN: 3346164179

Academic Paper from the year 2020 in the subject Computer Science - Miscellaneous, , language: English, abstract: In this paper we describe a technical system for DC motor speed control. The speed of DC motor is controlled using Neural Network Based Model Reference and Predictive controllers with the use of Matlab/Simulink. The analysis of the DC motor is done with and without input side Torque disturbance input and the simulation results obtained by comparing the desired and actual speed of the DC motor using random reference and sinusoidal speed inputs for the DC motor with Model Reference and Predictive controllers. The DC motor with Model Reference controller shows almost the actual speed is the same as the desired speed with a good performance than the DC motor with Predictive controller for the system with and without input side disturbance. Finally the comparative simulation result prove the effectiveness of the DC motor with Model Reference controller.

Speed Control of Buck-converter Driven DC Motor Using PD-type Fuzzy Logic Controller

Speed Control of Buck-converter Driven DC Motor Using PD-type Fuzzy Logic Controller
Author: Zakaria Abdul Rahman
Publisher:
Total Pages: 48
Release: 2009
Genre: Fuzzy logic
ISBN:

The purpose of this project is to control speed of buck converter driven DC motor using PD-type fuzzy logic controller. At the beginning, the simulation (MATLAB simulink) is started with buck converter driven DC motor modeling. In this project, PD-type fuzzy logic controller is designed based on the membership function and the rule base. Thus, the designed PD-type fuzzy logic is applied to the buck converter driven DC motor model. The objective of the simulation is to predict the system response of the buck converter driven DC motor with different membership function. For the first model of PD-type fuzzy logic controller, it will use 3 membership functions which are equal to 9 rule base. Then for the second simulation, it will use 5 membership functions which are equal to 25 rule base and the last model of controller use 7 membership function that are equal to 49 rules. Fuzzy logic controller that is capable of improving its performance in the control of a nonlinear system whose dynamics is unknown or uncertain. This direct learning fuzzy controller is able to improve its performance without having to identify a model of the plant.

Fuzzy Logic Controller for Controlling DC Motor Speed Using MATLAB Applications

Fuzzy Logic Controller for Controlling DC Motor Speed Using MATLAB Applications
Author: Nur Azliza Ali
Publisher:
Total Pages: 84
Release: 2008
Genre: Fuzzy logic
ISBN:

The purpose of this project is to control the speed of DC motor by using fuzzy logic controller with MATLAB applications. The scopes includes the simulation and modeling of DC motor, implementation of fuzzy logic controller to actual DC motor and comparison between MATLAB simulation and experimental result. This research was about to introduce the new ability of estimating speed and control the DC motor. By using the controller, the speed can be tuned until it get similar to the desired output that user need. Data will be transferred from the controller to the DC motor using the DAQ card. Encoder will be used to detect speed error between the desired output and the measured output.

Model Predictive Control for AC Motors

Model Predictive Control for AC Motors
Author: Yaofei Han
Publisher: Springer Nature
Total Pages: 137
Release: 2022-02-08
Genre: Technology & Engineering
ISBN: 9811680663

This book introduces how to improve the accuracy and robustness of model predictive control. Firstly, the disturbance observation- and compensation-based method is developed. Secondly, direct parameter identification methods are developed. Thirdly, the seldom-focused-on issues such as sampling and delay problems are solved in this book. Overall, this book solves the problems in a systematic and innovative way. Chapter 2 is available open access under a Creative Commons Attribution 4.0 International License via link.springer.com

Sustainable Energy-Water-Environment Nexus in Deserts

Sustainable Energy-Water-Environment Nexus in Deserts
Author: Essam Heggy
Publisher: Springer Nature
Total Pages: 811
Release: 2022-04-25
Genre: Technology & Engineering
ISBN: 3030760812

This book addresses challenges and opportunities in the Energy-Water-Environment (EWE) nexus, with a particular focus on research and technology development requirements in harsh desert climates. Its chapters include selected contributions presented during the 1st international conference on sustainable Energy-Water-Environment nexus in desert climates (ICSEWEN-19) held at the Qatar Environment and Energy Research Institute (QEERI) in Doha, Qatar in December 2019. This volume is comprised of three main chapters, each describing important case studies and progress on water, energy and environmental questions. A fourth chapter on policies and community outreach on these three areas is also included. This compilation aims to bridge the gap between research and industry to address the socioeconomic impacts of the nexus imbalance as perceived by scientists, industrial partners, and policymakers. The content of this book is of particular importance to graduate students, researchers and decision makers interested in understanding water, energy and environmental challenges in arid areas. Re searchers in environmental and civil engineering, chemistry, hydrology and environmental science can also find unique in-situ observations of the current nexus imbalance in deserts climate to validate their investigations. It is also an invaluable guide for industry professionals working in water, energy, environment and food sectors to understand the rapidly evolving landscape of the EWE nexus in arid areas. The analyses, observations and lessons-learned summarized herein are applicable to other arid areas outside North Africa and the Arabian Peninsula as well, such as central Australia, the southwest of the United States and deserts in central Asia.

Advances in Communication, Devices and Networking

Advances in Communication, Devices and Networking
Author: Rabindranath Bera
Publisher: Springer
Total Pages: 923
Release: 2018-05-23
Genre: Technology & Engineering
ISBN: 9811079013

The book provides insights of International Conference in Communication, Devices and Networking (ICCDN 2017) organized by the Department of Electronics and Communication Engineering, Sikkim Manipal Institute of Technology, Sikkim, India during 3 – 4 June, 2017. The book discusses latest research papers presented by researchers, engineers, academicians and industry professionals. It also assists both novice and experienced scientists and developers, to explore newer scopes, collect new ideas and establish new cooperation between research groups and exchange ideas, information, techniques and applications in the field of electronics, communication, devices and networking.

HCI International 2022 – Late Breaking Posters

HCI International 2022 – Late Breaking Posters
Author: Constantine Stephanidis
Publisher: Springer Nature
Total Pages: 736
Release: 2022-11-24
Genre: Computers
ISBN: 3031196791

Volume CCIS 1654 is part of the refereed proceedings of the 24th International Conference on Human-Computer Interaction, HCII 2022, which was held virtually during June 26 to July 1, 2022. A total of 5583 individuals from academia, research institutes, industry, and governmental agencies from 88 countries submitted contributions, and 1276 papers and 275 posters were included in the proceedings that were published just before the start of the conference. Additionally, 296 papers and 181 posters are included in the volumes of the proceedings published after the conference, as “Late Breaking Work” (papers and posters). The contributions thoroughly cover the entire field of human-computer interaction, addressing major advances in knowledge and effective use of computers in a variety of application areas.