A Semi-graphical Method for Analyzing Strains Measured on Three Or Four Gage Lines Intersecting at 45 Degrees

A Semi-graphical Method for Analyzing Strains Measured on Three Or Four Gage Lines Intersecting at 45 Degrees
Author: H. N. Hill
Publisher:
Total Pages: 16
Release: 1939
Genre: Aeronautics
ISBN:

The method herein described is essentially graphical, but does require a small amount of arithmetical manipulation. It is not, however, a combination of the two methods mentioned above. To the best of the writer's knowledge, this treatment constitutes an entirely new procedure for determining stresses from strains measured on gage lines intersecting at 45 degrees. The method is thought to have some advantages in simplicity and directness over both of those previously mentioned.

Charts for Rapid Analysis of 45 Degrees Strain-rosette Data

Charts for Rapid Analysis of 45 Degrees Strain-rosette Data
Author: S. S. Manson
Publisher:
Total Pages: 762
Release: 1944
Genre: Strain gages
ISBN:

Charts are presented for rapidly determining the principal strains and stresses, the maximum shear strain and stress, and the orientation of principal axes for data for 45 degrees strain rosettes. The charts may be used for analyzing the conventional data consisting of strains measured along three gage lines 45 degrees apart, but their application is more direct if the rosette data are obtained by means of special circuits that require the use of four gages 45 degrees apart.

AECU

AECU
Author:
Publisher:
Total Pages: 124
Release: 1955
Genre:
ISBN:

American Aviation

American Aviation
Author:
Publisher:
Total Pages: 706
Release: 1939
Genre: Aeronautics
ISBN:

Issues for include Annual air transport progress issue.