Iron and Cobalt Catalysts

Iron and Cobalt Catalysts
Author: Wilson D. Shafer
Publisher: MDPI
Total Pages: 414
Release: 2020-06-23
Genre: Science
ISBN: 303928388X

Since the turn of the last century when the field of catalysis was born, iron and cobalt have been key players in numerous catalysis processes. These metals, due to their ability to activate CO and CH, haev a major economic impact worldwide. Several industrial processes and synthetic routes use these metals: biomass-to-liquids (BTL), coal-to-liquids (CTL), natural gas-to-liquids (GTL), water-gas-shift, alcohol synthesis, alcohol steam reforming, polymerization processes, cross-coupling reactions, and photocatalyst activated reactions. A vast number of materials are produced from these processes, including oil, lubricants, waxes, diesel and jet fuels, hydrogen (e.g., fuel cell applications), gasoline, rubbers, plastics, alcohols, pharmaceuticals, agrochemicals, feed-stock chemicals, and other alternative materials. However, given the true complexities of the variables involved in these processes, many key mechanistic issues are still not fully defined or understood. This Special Issue of Catalysis will be a collaborative effort to combine current catalysis research on these metals from experimental and theoretical perspectives on both heterogeneous and homogeneous catalysts. We welcome contributions from the catalysis community on catalyst characterization, kinetics, reaction mechanism, reactor development, theoretical modeling, and surface science.

Natural Gas Conversion VI

Natural Gas Conversion VI
Author: T.H. Fleisch
Publisher: Elsevier
Total Pages: 577
Release: 2001-06-01
Genre: Technology & Engineering
ISBN: 0080537316

This volume contains peer-reviewed manuscripts describing the scientific and technological advances presented at the 6th Natural Gas Conversion Sumposium held in Alaska in June 2001. This symposium continues the tradition of excellence and the status as the premier technical meeting in this area established by previous meetings.The 6th Natural Gas Conversion Symposium is conducted under the overall direction of the Organizing Committee. The Program Committee was responsible for the review, selection, editing of most of the manuscripts included in this volum. A standing International Advisory Board has ensured the effective long-term planning and the continuity and technical excellence of these meetings.

Greener Fischer-Tropsch Processes

Greener Fischer-Tropsch Processes
Author: Peter M. Maitlis
Publisher: John Wiley & Sons
Total Pages: 404
Release: 2013-01-30
Genre: Science
ISBN: 3527656855

Greener Fischer-Tropsch Processes How can we use our carbon-based resources in the most responsible manner? How can we most efficiently transform natural gas, coal, or biomass into diesel, jet fuel or gasoline to drive our machines? The Big Questions today are energy-related, and the Fischer-Tropsch process provides industrially tested solutions. This book offers a comprehensive and up-to-date overview of the Fischer-Tropsch process, from the basic science and engineering to commercial issues. It covers industrial, economic, environmental, and fundamental aspects, with a specific focus on “green” concepts such as sustainability, process improvement, waste-reduction, and environmental care. The result is a practical reference for researchers, engineers, and financial analysts working in the energy sector, who are interested in carbon conversion, fuel processing or synthetic fuel technologies. It is also an ideal introductory book on the Fischer-Tropsch process for graduate courses in chemistry and chemical engineering.

Fischer-Tropsch Technology

Fischer-Tropsch Technology
Author: André Steynberg
Publisher: Elsevier
Total Pages: 722
Release: 2004-10-30
Genre: Technology & Engineering
ISBN: 0080472796

Fischer-Tropsch Technology is a unique book for its state-of-the-art approach to Fischer Tropsch (FT) technology. This book provides an explanation of the basic principles and terminology that are required to understand the application of FT technology. It also contains comprehensive references to patents and previous publications. As the first publication to focus on theory and application, it is a contemporary reference source for students studying chemistry and chemical engineering. Researchers and engineers active in the development of FT technology will also find this book an invaluable source of information. * Is the first publication to cover the theory and application for modern Fischer Tropsch technology * Contains comprehensive knowledge on all aspects relevant to the application of Fischer Tropsch technology* No other publication looks at past, present and future applications

Mesoporous Zeolites

Mesoporous Zeolites
Author: Javier García-Martínez
Publisher: John Wiley & Sons
Total Pages: 608
Release: 2015-05-26
Genre: Technology & Engineering
ISBN: 3527335749

Authored by a top-level team of both academic and industrial researchers in the field, this is an up-to-date review of mesoporous zeolites. The leading experts cover novel preparation methods that allow for a purpose-oriented fine-tuning of zeolite properties, as well as the related materials, discussing the specific characterization methods and the applications in close relation to each individual preparation approach. The result is a self-contained treatment of the different classes of mesoporous zeolites. With its academic insights and practical relevance this is a comprehensive handbook for researchers in the field and related areas, as well as for developers from the chemical industry.

Natural Gas Conversion V

Natural Gas Conversion V
Author: A. Parmaliana
Publisher: Elsevier
Total Pages: 1005
Release: 1998-09-17
Genre: Technology & Engineering
ISBN: 0080537308

On January 1988, the ascertained and economically accessible reserves of Natural Gas (NG) amounted to over 144,000 billion cubic meters worldwide, corresponding to 124 billion tons of oil equivalents (comparable with the liquid oil reserves, which are estimated to be 138 billion TOE). It is hypothesized that the volume of NG reserve will continue to grow at the same rate of the last decade. Forecasts on production indicate a potential increase from about 2,000 billion cubic meters in 1990 to not more than 3,300 billion cubic meters in 2010, even in a high economic development scenario. NG consumption represents only one half of oil: 1.9 billion TOE/y as compared to 3.5 of oil. Consequently, in the future gas will exceed oil as a carbon atom source. In the future the potential for getting energetic vectors or petrochemicals from NG will continue to grow.The topics covered in Natural Gas Conversion V reflect the large global R&D effort to look for new and economic ways of NG exploitation. These range from the direct conversion of methane and light paraffins to the indirect conversion through synthesis gas to fuels and chemicals. Particularly underlined and visible are the technologies already commercially viable.These proceedings prove that mature and technologically feasible processes for natural gas conversion are already available and that new and improved catalytic approaches are currently developing, the validity and feasibility of which will soon be documented. This is an exciting area of modern catalysis, which will certainly open novel and rewarding perspectives for the chemical, energy and petrochemical industries.

Catalysis

Catalysis
Author: James J Spivey
Publisher: Royal Society of Chemistry
Total Pages: 259
Release: 2013-03-11
Genre: Science
ISBN: 1849737207

Over 7000 papers are published in the field of catalysis each year. While the majority appear within a handful publications, keeping up with the literature can be difficult. Now in its 25th volume, the Specialist Periodical Report on Catalysis presents critical and comprehensive reviews of the hottest literature published over the last twelve months. Industrial and academic scientists face increasing challenges to find cost-effective and environmentally sound methods for converting natural resources into fuels, chemicals and energy. This series is edited by two leading researchers in the field and provides a balanced and in-depth review of the modern approaches to these challenges, covering major areas of heterogeneous and homogenous catalysis, as well as specific applications of catalysis, such as NOx control, kinetics and experimental techniques, such as microcalorimetry. With chapters detailing specific areas within the field, this series is a comprehensive reference for anyone working in Catalysis and an essential resource for any Chemistry Library.

Zeolites

Zeolites
Author: Claudia Belviso
Publisher: BoD – Books on Demand
Total Pages: 228
Release: 2016-08-24
Genre: Science
ISBN: 9535125761

This book collects recent results about research activities on zeolites, from synthesis to application. It is composed of two sections. The first is devoted to articles and brief review articles on the synthesis of zeolite from fly ash and final application of these newly formed minerals to solve environmental problems. The second part of the book provides useful information on different applications both of natural and synthetic zeolites ranging from environmental pollution to industrial and commercial applications. The performance of zeolite molecular sieves, hollow titanium zeolites and luminescent zeolites is interesting considering the new frontiers reached by the research on zeolites. This book is a useful instrument for researchers, teachers and students who are interested in investigating innovative aspects of the studies on zeolite.

Production of Biofuels and Chemicals with Bifunctional Catalysts

Production of Biofuels and Chemicals with Bifunctional Catalysts
Author: Zhen Fang
Publisher: Springer
Total Pages: 396
Release: 2017-12-27
Genre: Medical
ISBN: 9811051372

This book provides state-of-the-art reviews, current research, prospects and challenges of the production of biofuels and chemicals such as furanic biofuels, biodiesel, carboxylic acids, polyols and others from lignocellulosic biomass, furfurals, syngas and γ-valerolactone with bifunctional catalysts, including catalytic, and combined biological and chemical catalysis processes. The bifunctionality of catalytic materials is a concept of not only using multifunctional solid materials as activators, but also design of materials in such a way that the catalytic materials have synergistic characteristics that promote a cascade of transformations with performance beyond that of mixed mono-functional catalysts. This book is a reference designed for researchers, academicians and industrialists in the area of catalysis, energy, chemical engineering and biomass conversion. Readers will find the wealth of information contained in chapters both useful and essential, for assessing the production and application of various biofuels and chemicals by chemical catalysis and biological techniques.