Two-Stage, Integrated, Geothermal-CO2 Storage Reservoirs

Two-Stage, Integrated, Geothermal-CO2 Storage Reservoirs
Author:
Publisher:
Total Pages: 20
Release: 2012
Genre:
ISBN:

We introduce a hybrid two-stage energy-recovery approach to sequester CO2 and produce geothermal energy at low environmental risk and low cost by integrating geothermal production with CO2 capture and sequestration (CCS) in saline, sedimentary formations. Our approach combines the benefits of the approach proposed by Buscheck et al. (2011b), which uses brine as the working fluid, with those of the approach first suggested by Brown (2000) and analyzed by Pruess (2006), using CO2 as the working fluid, and then extended to saline-formation CCS by Randolph and Saar (2011a). During stage one of our hybrid approach, formation brine, which is extracted to provide pressure relief for CO2 injection, is the working fluid for energy recovery. Produced brine is applied to a consumptive beneficial use: feedstock for fresh water production through desalination, saline cooling water, or make-up water to be injected into a neighboring reservoir operation, such as in Enhanced Geothermal Systems (EGS), where there is often a shortage of a working fluid. For stage one, it is important to find economically feasible disposition options to reduce the volume of brine requiring reinjection in the integrated geothermal-CCS reservoir (Buscheck et al. 2012a). During stage two, which begins as CO2 reaches the production wells; coproduced brine and CO2 are the working fluids. We present preliminary reservoir engineering analyses of this approach, using a simple conceptual model of a homogeneous, permeable CO2 storage formation/geothermal reservoir, bounded by relatively impermeable sealing units. We assess both the CO2 sequestration capacity and geothermal energy production potential as a function of well spacing between CO2 injectors and brine/CO2 producers for various well patterns and for a range of subsurface conditions.

Active Management of Integrated Geothermal-CO2 Storage Reservoirs in Sedimentary Formations

Active Management of Integrated Geothermal-CO2 Storage Reservoirs in Sedimentary Formations
Author:
Publisher:
Total Pages:
Release: 2012
Genre:
ISBN:

Active Management of Integrated Geothermal-CO2 Storage Reservoirs in Sedimentary Formations: An Approach to Improve Energy Recovery and Mitigate Risk: FY1 Final Report The purpose of phase 1 is to determine the feasibility of integrating geologic CO2 storage (GCS) with geothermal energy production. Phase 1 includes reservoir analyses to determine injector/producer well schemes that balance the generation of economically useful flow rates at the producers with the need to manage reservoir overpressure to reduce the risks associated with overpressure, such as induced seismicity and CO2 leakage to overlying aquifers. Based on a range of well schemes, techno-economic analyses of the levelized cost of electricity (LCOE) are conducted to determine the economic benefits of integrating GCS with geothermal energy production. In addition to considering CO2 injection, reservoir analyses are conducted for nitrogen (N2) injection to investigate the potential benefits of incorporating N2 injection with integrated geothermal-GCS, as well as the use of N2 injection as a potential pressure-support and working-fluid option. Phase 1 includes preliminary environmental risk assessments of integrated geothermal-GCS, with the focus on managing reservoir overpressure. Phase 1 also includes an economic survey of pipeline costs, which will be applied in Phase 2 to the analysis of CO2 conveyance costs for techno-economics analyses of integrated geothermal-GCS reservoir sites. Phase 1 also includes a geospatial GIS survey of potential integrated geothermal-GCS reservoir sites, which will be used in Phase 2 to conduct sweet-spot analyses that determine where promising geothermal resources are co-located in sedimentary settings conducive to safe CO2 storage, as well as being in adequate proximity to large stationary CO2 sources.

Integrated Geothermal-CO2 Storage Reservoirs

Integrated Geothermal-CO2 Storage Reservoirs
Author:
Publisher:
Total Pages:
Release: 2012
Genre:
ISBN:

The purpose of phase 1 is to determine the feasibility of integrating geologic CO2 storage (GCS) with geothermal energy production. Phase 1 includes reservoir analyses to determine injector/producer well schemes that balance the generation of economically useful flow rates at the producers with the need to manage reservoir overpressure to reduce the risks associated with overpressure, such as induced seismicity and CO2 leakage to overlying aquifers. This submittal contains input and output files of the reservoir model analyses. A reservoir-model "index-html" file was sent in a previous submittal to organize the reservoir-model input and output files according to sections of the FY1 Final Report to which they pertain. The recipient should save the file: Reservoir-models-inputs-outputs-index.html in the same directory that the files: Section2.1.*.tar.gz files are saved in.

Active Management of Integrated Geothermal-CO2 Storage Reservoirs in Sedimentary Formations

Active Management of Integrated Geothermal-CO2 Storage Reservoirs in Sedimentary Formations
Author:
Publisher:
Total Pages:
Release: 2015
Genre:
ISBN:

This data submission is for Phase 2 of Active Management of Integrated Geothermal-CO2 Storage Reservoirs in Sedimentary Formations, which focuses on multi-fluid (CO2 and brine) geothermal energy production and diurnal bulk energy storage in geologic settings that are suitable for geologic CO2 storage. This data submission includes all data used in the Geosphere Journal article by Buscheck et al (2016). All assumptions are discussed in that article.

Numerical study of physico- chemical interactions for CO2 sequestration and geothermal energy utilization in the Ordos Basin, China

Numerical study of physico- chemical interactions for CO2 sequestration and geothermal energy utilization in the Ordos Basin, China
Author: Hejuan Liu
Publisher: Cuvillier Verlag
Total Pages: 285
Release: 2014-11-10
Genre: Science
ISBN: 3736948425

In this dissertation, three simulators (i.e. TOUGH2MP, TOUGHREACT and FLAC3D) were used to simulate the complex physical and chemical interactions induced by CO2 sequestration. The simulations were done instages, ranging from the two phase (water and CO2) fluid flow (H2), through coupled hydro-mechanical effects (H2M) and geochemical responses (i.e. CO2-water-rock interactions (H2C)), to the extension of CCS to CCUS by the application of combined geothermal production and CO2 sequestration technologies. The findings of this study are essential for a thorough understanding of the complex interactions in the multiphase, multicomponent porous media controlled by different physical and chemical mechanisms. Furthermore, the simulation results will provide an invaluable reference for field operations in CCS projects, especially for the full-integration pilot scale CCS project launched in the Ordos Basin. Subsequently, a preliminary site selection scheme for the combined geothermal production and CO2 sequestration was set up, which considered various factorsinvolved in site selection, ranging from safety, economical, environmental and technical issues. This work provides an important framework for the combined geothermal production and CO2 sequestration project. However, further numerical and field studies are still needed to improve on a series of criteria and related parameters necessary for a better understanding of the technology.

Energy and Fuel Systems Integration

Energy and Fuel Systems Integration
Author: Yatish T. Shah
Publisher: CRC Press
Total Pages: 428
Release: 2015-10-15
Genre: Science
ISBN: 1498777317

Energy and Fuel Systems Integration explains how growing energy and fuel demands, paired with the need for environmental preservation, require different sources of energy and fuel to cooperate and integrate with each other rather than simply compete. Providing numerous examples of energy and fuel systems integration success stories, this book:Discu

Engineering Aspects of Geologic CO2 Storage

Engineering Aspects of Geologic CO2 Storage
Author: Dayanand Saini
Publisher: Springer
Total Pages: 85
Release: 2017-03-22
Genre: Technology & Engineering
ISBN: 3319560743

This timely book explores the lessons learned in and potentials of injecting supercritical CO2 into depleted oil and gas reservoirs, in order to maximize both hydrocarbon recovery and the storage capacities of injected CO2. The author provides a detailed discussion of key engineering parameters of simultaneous CO2 enhanced oil recovery and CO2 storage in depleted hydrocarbon reservoirs. These include candidate site selection, CO2 oil miscibility, maximizing CO2-storage capacity in enhanced oil recovery operations, well configurations, and cap and reservoir rock integrity. The book will help practicing professionals devise strategies to curb greenhouse gas emissions from the use of fossil fuels for energy production via geologic CO2 storage, while developing CO2 injection as an economically viable and environmentally sensible business model for hydrocarbon exploration and production in a low carbon economy.

Clean Energy Systems in the Subsurface: Production, Storage and Conversion

Clean Energy Systems in the Subsurface: Production, Storage and Conversion
Author: Michael Z. Hou
Publisher: Springer Science & Business Media
Total Pages: 487
Release: 2013-04-03
Genre: Technology & Engineering
ISBN: 3642378498

Anthropogenic greenhouse gas emissions, energy security and sustainability are three of the greatest contemporary global challenges today. This year the Sino-German Cooperation Group “Underground Storage of CO2 and Energy”, is meeting on the 21-23 May 2013 for the second time in Goslar, Germany, to convene its 3rd Sino-German conference on the theme “Clean Energy Systems in the Subsurface: Production, Storage and Conversion”. This volume is a collection of diverse quality scientific works from different perspectives elucidating on the current developments in CO2 geologic sequestration research to reduce greenhouse emissions including measures to monitor surface leakage, groundwater quality and the integrity of caprock, while ensuring a sufficient supply of clean energy. The contributions herein have been structured into 6 major thematic research themes: Integrated Energy and Environmental Utilization of Geo-reservoirs: Law, Risk Management & Monitoring CO2 for Enhanced Gas and Oil Recovery, Coal Bedded Methane and Geothermal Systems Trapping Mechanisms and Multi-Barrier Sealing Systems for Long-Term CO2 Storage Coupled THMC-Processes and Numerical Modelling Rock Mechanical Behaviour Considering Cyclic Loading, Dilatancy, Damage, Self-sealing and Healing Underground Storage and Supply of Energy “Clean energy systems in the subsurface” will be invaluable to researchers, scientists and experts in both academia and industry trying to find a long lasting solution to the problems of global climate change, energy security and sustainability.