Bubbles in Polymeric Liquids

Bubbles in Polymeric Liquids
Author: S.P. Levitsky
Publisher: CRC Press
Total Pages: 316
Release: 1995-01-09
Genre: Technology & Engineering
ISBN: 9781566762472

From the Authors' Preface The advancements of technology . . . and chemical engineering have brought about extensive use of a wide range of rheologically complex materials, e.g., polymeric solutions and melts, suspensions, mixtures, oil products, fibre-forming substances, etc. that are characterized by diverse and, every so often, significant deviations from classical Newtonian behavior. Such materials are often used in conditions where the formation of vapor-gas bubbles or two-phase flow regimes is possible. This necessitates deep investigations into the thermo-hydrodynamic problems of liquids with bubbles for the case of a continuous phase with anomalous rheological properties. These conditions are typical of a number of applications and manufacturing processes, e.g., gas removal from polymeric solutions or melts in production of film, chemical fibres and other polymeric materials. . . . The bubbles containing gas or vapor-gas mixtures are often present in polymeric systems. This is because of a number of reasons, e.g., a low wettability of solid surfaces by polymers, the use of volatile solvents, abundance of vapor-gas nuclei, the capture of gas by porous or fibre-like polymeric particles during the polymer dissolution or melting, etc. Spontaneous evacuation of bubbles in polymeric media is usually complicated by a high viscosity of the liquid; therefore two-phase polymeric systems possess a higher sedimentation and aggregation stability than bubble mixtures in low-molecular-weight liquids. One of the main problems in the dynamics of vapor-liquid and gas-liquid systems is the investigation of heat and mass transfer and phase interactions in a liquid with bubbles. The decisive importance of this problem in the analysis of various aspects of the bubbly fluid behavior under diverse conditions, in particular, during a sound wave propagation, has given impetus to numerous researches. The current state of art in the investigation of Newtonian liquids with bubbles is described in voluminous literature. However, these problems have been much less studied for non-Newtonian systems. Behavior of bubbles in polymeric liquids is of great interest because of wide application in chemical technology. . . . In a number of processes connected with the application of polymeric fluids, the dynamic interaction of bubbles with liquid phase plays the key role. Such interaction in the case of a polymeric liquid phase are essentially influenced by the specific properties of macromolecular fluids, including primarily the rheological effects. These effects in the bubble dynamics combined with heat and mass transfer between the bubble content and the ambient liquid constitute the main subject of the analysis presented in this book. Macrokinetics Laboratory, and Full Professor at the Byelorussian Polytechnic Institute, Department of Heat and Power Engineering. Dr. Schulman is recognized as a leading authority in his field of investigation. Extensive Bibliography: A valuable feature of this new book is its extensive international bibliography, with 393 references.

Multiphase Flow in Polymer Processing

Multiphase Flow in Polymer Processing
Author: Chang Han
Publisher: Elsevier
Total Pages: 476
Release: 2012-12-02
Genre: Technology & Engineering
ISBN: 0323149022

Multiphase Flow in Polymer Processing focuses on dispersed and stratified multiphase flow in polymer processing. This book explores the rheological behavior of multiphase (or multicomponent) polymeric systems as they are involved in various fabrication operations. It also outlines the importance of the morphological states of multiphase polymeric systems to explain the systems, rheological behavior in the fluid state, and mechanical behavior in the solid state. This monograph consists of eight chapters divided into two parts. After discussing dispersed and stratified multiphase flow in polymer processing, it introduces the reader to the fundamentals of rheology. The following chapters focus on the rheological behavior of particulate-filled polymeric systems and heterogeneous polymeric systems; the phenomenon of droplet breakup in dispersed flow; and gas-charged polymeric systems. The role of the discrete phase (that is, solid particles, liquid droplets, gas bubbles) in determining the bulk rheological properties of the multiphase system is highlighted, along with some representative polymer processing operations (namely, fiber spinning and injection molding) of the multiphase (or multicomponent) polymeric systems. Coextrusion in cylindrical, rectangular, and annular dies is also considered. The final chapter is devoted to the phenomenon of interfacial instability in coextrusion. This text will be a useful resource for chemists, chemical engineers, and those in the polymer processing industry.

Rheology of Non-spherical Particle Suspensions

Rheology of Non-spherical Particle Suspensions
Author: Francisco Chinesta
Publisher: Elsevier
Total Pages: 398
Release: 2015-10-06
Genre: Science
ISBN: 0081008120

This book provides a review of the current understanding of the behavior of non-spherical particle suspensions providing experimental results, rheological models and numerical modeling. In recent years, new models have been developed for suspension rheology and as a result applications for nanocomposites have increased. The authors tackle issues within experimental, model and numerical simulations of the behavior of particle suspensions. Applications of non-spherical particle suspension rheology are widespread and can be found in organic matrix composites, nanocomposites, biocomposites, fiber-filled fresh concrete flow, blood and biologic fluids. - Understand how to model and predict the final microstructure and properties of particle suspensions - Explores nano, micro, meso and macro scales - Rheology, thermomechanical and electromagnetic physics are discussed