Thermal Effects in Fracture of Multiphase Materials

Thermal Effects in Fracture of Multiphase Materials
Author: Klaus P. Herrmann
Publisher: Springer Science & Business Media
Total Pages: 258
Release: 2013-03-08
Genre: Science
ISBN: 3642884792

This book contains a selection of the lectures presented at the Euromech Colloquium 255, held at the Liborianum, Paderborn, from 31 October to 2 November 1989. The subject of the Colloquium "Thermal Effects in Fracture of Multiphase Materials" attracted about 50 scientists from 13 coun tries. Several well known scientists who are active in research on thermal effects in fracture proces ses were present at the Colloquium as lecturers (29 lectures were delivered) as well as valuable participants of the intensive discussions which took part during the sessions, coffe breaks and lunch times. The closing session of the Colloquium was devoted to a general discussion on the trends in the development of the research in the field, the prospects of the theoretical research, new materials (composites, ceramics etc. ), and the trends in technological applications. Over twenty comments and remarks have been made during this final general discussion, showing the interest of the audi torium in such an exchange of viewpoints. However, this discussion is not reflected in this volume. The Colloquium has been subdivided into six sessions: I "Thermodynamics of Fracture Processes" II . "Fracture of Nonhomogeneous Solids" III "Thermal Cracking of Heterogeneous Materials" IV-VI "Fracture Phenomena in Composite Systems I-III" One of the main topics in session I consisted in the description of the influence of thermal effects on shear band localization failure. Thereby shear bands nucleate due.

Advances in Continuum Mechanics

Advances in Continuum Mechanics
Author: Otto Brüller
Publisher: Springer Science & Business Media
Total Pages: 513
Release: 2012-12-06
Genre: Science
ISBN: 3642488900

Recognized authors contributed to this collection of original papers from all fields of research in continuum mechanics. Special emphasis is given to time dependent and independent permanent deformations, damage and fracture. Part of the contributions is dedicated to current efforts in describing material behavior with regard to, e.g., anisotropy, thermal effects, softening, ductile and brittle fracture, porosity and granular structure. Another part deals with numerical aspects arising from the implementation of material laws in the calculations of forming processes, soil mechanics and structural mechanics. Applications of theory and numerical methods belong to the following areas: Comparison with experimental results from material testing, metal forming under thermal and dynamic conditions, failure by damage, fracture and localized deformation modes. The variety of treated topics provides a survery of the actual research in these fields; therefore, the book is addressed to those interested in special problems of continuum mechanics as well as to those interested in a general knowledge.

Advances in Mathematical Modelling of Composite Materials

Advances in Mathematical Modelling of Composite Materials
Author: Konstantin Z. Markov
Publisher: World Scientific
Total Pages: 312
Release: 1994
Genre: Technology & Engineering
ISBN: 9789810216443

This volume contains papers of leading experts in the modern continuum theory of composite materials. The papers expose in detail the newest ideas, approaches, results and perspectives in this broadly interdisciplinary field ranging from pure and applied mathematics, mechanics, physics and materials science. The emphasis is on mathematical modelling and model analysis of the mechanical behaviour and strength of composites, including methods of predicting effective macroscopic properties (dielectric, elastic, nonlinear, inelastic, plastic and thermoplastic) from known microstructures.

Materials Modelling

Materials Modelling
Author: English
Publisher: CRC Press
Total Pages: 240
Release: 2020-11-26
Genre: Science
ISBN: 1000157075

In Materials Modelling: From Theory to Technology, a distinguished collection of authors has been assembled to celebrate the 60th birthday of Dr. R. Bullough, FRS and honor his contribution to the subject over the past 40 years. The volume explores subjects that have implications in a wide range of technologies, focusing on how basic research can be applied to real problems in science and engineering. Linking theory and technology, the book progresses from the theoretical background to current and future practical applications of modeling. Accessible to a diverse audience, it requires little specialist knowledge beyond a physics degree. The book is useful reading for postgraduates and researchers in condensed matter, nuclear engineering, and physical metallurgy, in addition to workers in R&D laboratories and the high technology industry.

Reliability and Optimization of Structural Systems ’91

Reliability and Optimization of Structural Systems ’91
Author: Rüdiger Rackwitz
Publisher: Springer Science & Business Media
Total Pages: 486
Release: 2012-12-06
Genre: Technology & Engineering
ISBN: 3642847536

This proceedings volume contains 38 papers presented at the 4th Working Conference on "Rel iability· and Optimization of Structural Systems", held at the Technical University of Munich, Germany, September 11- 13, 1991. The Working Conference was organised by the IFIP (Interna tional Federation for Information Processing) Working Group 7.5 of Technical Committee 7 and was the fourth in a series, following similar conferences held at the University of Aalborg, Den mark, May 1987, at the Imperial College, London, UK, September 1988 and at the University of California, Berkeley, California, USA, March 1990. The Working Conference was attended by 54 participants from 16 countries. The objectives of Working Group 7.5 are: • to promote modern structural systems optimization and reliability theory, • to advance international cooperation in the field of structural system optimization and reliability theory, • to stimulate research, development and application of structural system optimization and reli ability theory, • to further the dissemination and exchange of information on reliability and optimization of structural systems • to encourage education in structural system optimization and reliability theory. At present the members of the Working Group are: A. H.-S. Ang, U.S.A. M. Grimmelt, FRG G. A ugwti, Italy N. C. Lind, Canada M. J. Baker, UK H. O. Mad&en, Denmark P. Bjerager, Norway R. E. Melcher~, Australia C. A. Cornell, U.S.A. F. Mo~e~, U.S.A.

IUTAM Symposium on Microstructure-Property Interactions in Composite Materials

IUTAM Symposium on Microstructure-Property Interactions in Composite Materials
Author: R. Pyrz
Publisher: Springer Science & Business Media
Total Pages: 447
Release: 2012-12-06
Genre: Technology & Engineering
ISBN: 9401100594

The IUT AM Symposium on Microstructure Property Interactions in Composite Ma- rials was held during the dates 22nd to 25th August 1994 in Rebild Bakker Conference Centre, situated in the heart of one of Denmark's most beautiful natural areas. Participation in the Symposium was reserved for invited participants, suggested by members of the Scientific Committee. The cooperation with the Scientific Committee is highly appreciated. The Symposium brought together 76 researchers from 15 countries representing a broad range of backgrounds relevant to the topic of the meeting. The participants represented the disciplines of materials science and engineering, applied mechanics, applied mathematics and scientific computations. The Symposium comprehensively addressed the analytical, numerical and experimental methods that provide an estimation of the overall, effective properties from microstructural data. The 41 contributions emphasized the significance of the microstructure morphology in understanding the nature and origin of a multitude of properties such as viscoelasticity, plasticity, strength and fracture for a variety of polymer, metal and ceramic based composite materials. Specifically, the Symposium examined and reviewed the current state of the art of micromechanical modelling, experimental investigations and morphological qu- tification of composite materials' microstructure. The volume contains 35 papers published in an alphabetic order after the name of the first author. Much to regret of the Scientific Committee some manuscripts were not submitted. The financial support of the IUT AM, the Obels Family Foundation and the Institute of Mechanical Engineering, Aalborg University, is gratefully acknowledged.