The Codesign Of Embedded Systems A Unified Hardware Software Representation
Download The Codesign Of Embedded Systems A Unified Hardware Software Representation full books in PDF, epub, and Kindle. Read online free The Codesign Of Embedded Systems A Unified Hardware Software Representation ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
| Author | : Sanjaya Kumar |
| Publisher | : Springer Science & Business Media |
| Total Pages | : 288 |
| Release | : 2012-12-06 |
| Genre | : Computers |
| ISBN | : 1461312930 |
Current practice dictates the separation of the hardware and software development paths early in the design cycle. These paths remain independent with very little interaction occurring between them until system integration. In particular, hardware is often specified without fully appreciating the computational requirements of the software. Also, software development does not influence hardware development and does not track changes made during the hardware design phase. Thus, the ability to explore hardware/software tradeoffs is restricted, such as the movement of functionality from the software domain to the hardware domain (and vice-versa) or the modification of the hardware/software interface. As a result, problems that are encountered during system integration may require modification of the software and/or hardware, resulting in potentially significant cost increases and schedule overruns. To address the problems described above, a cooperative design approach, one that utilizes a unified view of hardware and software, is described. This approach is called hardware/software codesign. The Codesign of Embedded Systems develops several fundamental hardware/software codesign concepts and a methodology that supports them. A unified representation, referred to as a decomposition graph, is presented which can be used to describe hardware or software using either functional abstractions or data abstractions. Using a unified representation based on functional abstractions, an abstract hardware/software model has been implemented in a common simulation environment called ADEPT (Advanced Design Environment Prototyping Tool). This model permits early hardware/software evaluation and tradeoff exploration. Techniques have been developed which support the identification of software bottlenecks and the evaluation of design alternatives with respect to multiple metrics. The application of the model is demonstrated on several examples. A unified representation based on data abstractions is also explored. This work leads to investigations regarding the application of object-oriented techniques to hardware design. The Codesign of Embedded Systems: A Unified Hardware/Software Representation describes a novel approach to a topic of immense importance to CAD researchers and designers alike.
| Author | : Sanjaya Kumar |
| Publisher | : Springer |
| Total Pages | : 0 |
| Release | : 1995-11-30 |
| Genre | : Computers |
| ISBN | : 9780792396369 |
Current practice dictates the separation of the hardware and software development paths early in the design cycle. These paths remain independent with very little interaction occurring between them until system integration. In particular, hardware is often specified without fully appreciating the computational requirements of the software. Also, software development does not influence hardware development and does not track changes made during the hardware design phase. Thus, the ability to explore hardware/software tradeoffs is restricted, such as the movement of functionality from the software domain to the hardware domain (and vice-versa) or the modification of the hardware/software interface. As a result, problems that are encountered during system integration may require modification of the software and/or hardware, resulting in potentially significant cost increases and schedule overruns. To address the problems described above, a cooperative design approach, one that utilizes a unified view of hardware and software, is described. This approach is called hardware/software codesign. The Codesign of Embedded Systems develops several fundamental hardware/software codesign concepts and a methodology that supports them. A unified representation, referred to as a decomposition graph, is presented which can be used to describe hardware or software using either functional abstractions or data abstractions. Using a unified representation based on functional abstractions, an abstract hardware/software model has been implemented in a common simulation environment called ADEPT (Advanced Design Environment Prototyping Tool). This model permits early hardware/software evaluation and tradeoff exploration. Techniques have been developed which support the identification of software bottlenecks and the evaluation of design alternatives with respect to multiple metrics. The application of the model is demonstrated on several examples. A unified representation based on data abstractions is also explored. This work leads to investigations regarding the application of object-oriented techniques to hardware design. The Codesign of Embedded Systems: A Unified Hardware/Software Representation describes a novel approach to a topic of immense importance to CAD researchers and designers alike.
| Author | : Sanjaya Kumar |
| Publisher | : |
| Total Pages | : 274 |
| Release | : 1996 |
| Genre | : Embedded computer systems |
| ISBN | : |
| Author | : Jean-Michel Bergé |
| Publisher | : Springer Science & Business Media |
| Total Pages | : 161 |
| Release | : 2012-12-06 |
| Genre | : Computers |
| ISBN | : 146131349X |
Object-oriented techniques and languages have been proven to significantly increase engineering efficiency in software development. Many benefits are expected from their introduction into electronic modeling. Among them are better support for model reusability and flexibility, more efficient system modeling, and more possibilities in design space exploration and prototyping. Object-Oriented Modeling explores the latest techniques in object-oriented methods, formalisms and hardware description language extensions. The seven chapters comprising this book provide an overview of the latest object-oriented techniques for designing systems and hardware. Many examples are given in C++, VHDL and real-time programming languages. Object-Oriented Modeling describes further the use of object-oriented techniques in applications such as embedded systems, telecommunications and real-time systems, using the very latest techniques in object-oriented modeling. It is an essential guide to researchers, practitioners and students involved in software, hardware and system design.
| Author | : Bernd Kleinjohann |
| Publisher | : Springer |
| Total Pages | : 240 |
| Release | : 2013-04-18 |
| Genre | : Computers |
| ISBN | : 0387354093 |
Due to the decreasing production costs of IT systems, applications that had to be realised as expensive PCBs formerly, can now be realised as a system-on-chip. Furthermore, low cost broadband communication media for wide area communication as well as for the realisation of local distributed systems are available. Typically the market requires IT systems that realise a set of specific features for the end user in a given environment, so called embedded systems. Some examples for such embedded systems are control systems in cars, airplanes, houses or plants, information and communication devices like digital TV, mobile phones or autonomous systems like service- or edutainment robots. For the design of embedded systems the designer has to tackle three major aspects: The application itself including the man-machine interface, The (target) architecture of the system including all functional and non-functional constraints and, the design methodology including modelling, specification, synthesis, test and validation. The last two points are a major focus of this book. This book documents the high quality approaches and results that were presented at the International Workshop on Distributed and Parallel Embedded Systems (DIPES 2000), which was sponsored by the International Federation for Information Processing (IFIP), and organised by IFIP working groups WG10.3, WG10.4 and WG10.5. The workshop took place on October 18-19, 2000, in Schloß Eringerfeld near Paderborn, Germany. Architecture and Design of Distributed Embedded Systems is organised similar to the workshop. Chapters 1 and 4 (Methodology I and II) deal with different modelling and specification paradigms and the corresponding design methodologies. Generic system architectures for different classes of embedded systems are presented in Chapter 2. In Chapter 3 several design environments for the support of specific design methodologies are presented. Problems concerning test and validation are discussed in Chapter 5. The last two chapters include distribution and communication aspects (Chapter 6) and synthesis techniques for embedded systems (Chapter 7). This book is essential reading for computer science researchers and application developers.
| Author | : Giovanni De Micheli |
| Publisher | : Morgan Kaufmann |
| Total Pages | : 714 |
| Release | : 2002 |
| Genre | : Computers |
| ISBN | : 1558607021 |
This title serves as an introduction ans reference for the field, with the papers that have shaped the hardware/software co-design since its inception in the early 90s.
| Author | : F. Balarin |
| Publisher | : Springer Science & Business Media |
| Total Pages | : 311 |
| Release | : 2012-12-06 |
| Genre | : Technology & Engineering |
| ISBN | : 1461561272 |
Embedded systems are informally defined as a collection of programmable parts surrounded by ASICs and other standard components, that interact continuously with an environment through sensors and actuators. The programmable parts include micro-controllers and Digital Signal Processors (DSPs). Embedded systems are often used in life-critical situations, where reliability and safety are more important criteria than performance. Today, embedded systems are designed with an ad hoc approach that is heavily based on earlier experience with similar products and on manual design. Use of higher-level languages such as C helps structure the design somewhat, but with increasing complexity it is not sufficient. Formal verification and automatic synthesis of implementations are the surest ways to guarantee safety. Thus, the POLIS system which is a co-design environment for embedded systems is based on a formal model of computation. POLIS was initiated in 1988 as a research project at the University of California at Berkeley and, over the years, grew into a full design methodology with a software system supporting it. Hardware-Software Co-Design of Embedded Systems: The POLIS Approach is intended to give a complete overview of the POLIS system including its formal and algorithmic aspects. Hardware-Software Co-Design of Embedded Systems: The POLIS Approach will be of interest to embedded system designers (automotive electronics, consumer electronics and telecommunications), micro-controller designers, CAD developers and students.
| Author | : Jean-Michel Bergé |
| Publisher | : Springer Science & Business Media |
| Total Pages | : 178 |
| Release | : 2013-03-09 |
| Genre | : Technology & Engineering |
| ISBN | : 1475726295 |
Co-Design is the set of emerging techniques which allows for the simultaneous design of Hardware and Software. In many cases where the application is very demanding in terms of various performances (time, surface, power consumption), trade-offs between dedicated hardware and dedicated software are becoming increasingly difficult to decide upon in the early stages of a design. Verification techniques - such as simulation or proof techniques - that have proven necessary in the hardware design must be dramatically adapted to the simultaneous verification of Software and Hardware. Describing the latest tools available for both Co-Design and Co-Verification of systems, Hardware/Software Co-Design and Co-Verification offers a complete look at this evolving set of procedures for CAD environments. The book considers all trade-offs that have to be made when co-designing a system. Several models are presented for determining the optimum solution to any co-design problem, including partitioning, architecture synthesis and code generation. When deciding on trade-offs, one of the main factors to be considered is the flow of communication, especially to and from the outside world. This involves the modeling of communication protocols. An approach to the synthesis of interface circuits in the context of co-design is presented. Other chapters present a co-design oriented flexible component data-base and retrieval methods; a case study of an ethernet bridge, designed using LOTOS and co-design methodologies and finally a programmable user interface based on monitors. Hardware/Software Co-Design and Co-Verification will help designers and researchers to understand these latest techniques in system design and as such will be of interest to all involved in embedded system design.
| Author | : Reiner W. Hartenstein |
| Publisher | : Springer |
| Total Pages | : 872 |
| Release | : 2003-06-29 |
| Genre | : Computers |
| ISBN | : 3540446141 |
This book is the proceedings volume of the 10th International Conference on Field Programmable Logic and its Applications (FPL), held August 27 30, 2000 in Villach, Austria, which covered areas like reconfigurable logic (RL), reconfigurable computing (RC), and its applications, and all other aspects. Its subtitle "The Roadmap to Reconfigurable Computing" reminds us, that we are currently witnessing the runaway of a breakthrough. The annual FPL series is the eldest international conference in the world covering configware and all its aspects. It was founded 1991 at Oxford University (UK) and is 2 years older than its two most important competitors usually taking place at Monterey and Napa. FPL has been held at Oxford, Vienna, Prague, Darmstadt, London, Tallinn, and Glasgow (also see: http://www. fpl. uni kl. de/FPL/). The New Case for Reconfigurable Platforms: Converging Media. Indicated by palmtops, smart mobile phones, many other portables, and consumer electronics, media such as voice, sound, video, TV, wireless, cable, telephone, and Internet continue to converge. This creates new opportunities and even necessities for reconfigurable platform usage. The new converged media require high volume, flexible, multi purpose, multi standard, low power products adaptable to support evolving standards, emerging new standards, field upgrades, bug fixes, and, to meet the needs of a growing number of different kinds of services offered to zillions of individual subscribers preferring different media mixes.
| Author | : Frank Vahid |
| Publisher | : John Wiley & Sons |
| Total Pages | : 346 |
| Release | : 2001-10-17 |
| Genre | : Computers |
| ISBN | : 0471386782 |
This book introduces a modern approach to embedded system design, presenting software design and hardware design in a unified manner. It covers trends and challenges, introduces the design and use of single-purpose processors ("hardware") and general-purpose processors ("software"), describes memories and buses, illustrates hardware/software tradeoffs using a digital camera example, and discusses advanced computation models, controls systems, chip technologies, and modern design tools. For courses found in EE, CS and other engineering departments.
