Terzaghi Lectures

Terzaghi Lectures
Author: Karl Terzaghi
Publisher: ASCE Publications
Total Pages: 444
Release: 1986-01-01
Genre: Technology & Engineering
ISBN: 9780784475799

Sponsored by the Executive Committee of the Geotechnical Engineering Division of ASCE. This Geotechnical Special Publication contains eight lectures given between 1974 and 1983 in honor of Karl Terzaghi and repressenting diverse aspects of geotechnical engineering and engineering geology. Topics include: the relationship of geology and geotechnical engineering and how a study of the geology of engineering sites is an important starting point for all geotechnical site studies; effects of dynamic soil properties on soil-structure interaction; bearing capacity and settlement of pile foundations; design and construction of drilled shafts; evaluating calculated risk in geotechnical engineering; proposal forØthe establishment of a national center for investigating civil engineering failures, with several case studies; pre-Columbian earth construction in the Americas and technological developments between 2,500 and 500 years ago; and recent progress in the design and construction of concrete-face rockfill dams. The 1978 lecture by the late N.M. Newmark is not included.

Drilled Shafts

Drilled Shafts
Author: National Highway Institute (U.S.)
Publisher:
Total Pages: 608
Release: 1988
Genre: Earthwork
ISBN:

This document was written as a resource for participants in a short course covering the topic of construction and design of drilled shaft foundations for bridges and other structures. It is the second edition of a Federal Highway Administration workbook on construction and design of drilled shafts. The first edition was written in 1988 (FHWA-SA-HI-88-042). While introductory material from the 1988 edition was retained, the emphasis in this document is on providing relatively comprehensive information for engineers who already have some experience with drilled shaft construction and/or design. The initial chapters cover an overview of the characteristics of drilled shafts, site investigations for drilled shafts (to collect information for both construction and design), and details of drilled shaft construction. These chapters are followed by several chapters on the design of drilled shafts in soil and rock for both axial and lateral loading, with examples. Both allowable stress design and load and resistance factor design principles are addressed. Details of design calculations procedures are provided in the appendices.

The Pressuremeter

The Pressuremeter
Author: Jean-Louis Briaud
Publisher: Routledge
Total Pages: 480
Release: 2019-07-16
Genre: Technology & Engineering
ISBN: 1351409484

This classic title deals presents all one needs to know about pressuremeter test, a soil and rock test used in civil engineering. It consists of placing a cylindrical probe in the ground and expanding the probe to pressurize the soil or the rock horizontally. The pressure on the soil and the relative increase in cavity radius are obtained and give an in situ stress strain curve. The pressuremeter test is repeated at various depths in order to obtain profiles of soil parameters. The design applications of the preboring pressuremeter test include: shallow foundations under vertical loads, deep foundations under vertical and horizontal loads, ground anchors, cantilever drilled shaft walls and anchored bulkheads, pavements, stone columns, ground improvement and compaction control.

Memorial Tributes

Memorial Tributes
Author: National Academy of Engineering
Publisher: National Academies Press
Total Pages: 444
Release: 2011-11-10
Genre: Biography & Autobiography
ISBN: 0309213061

This is the fifteenth volume in the series of Memorial Tributes compiled by the National Academy of Engineering as a personal remembrance of the lives and outstanding achievements of its members and foreign associates. These volumes are intended to stand as an enduring record of the many contributions of engineers and engineering to the benefit of humankind. In most cases, the authors of the tributes are contemporaries or colleagues who had personal knowledge of the interests and the engineering accomplishments of the deceased.