Second-Generation High-Temperature Superconducting Coils and Their Applications for Energy Storage

Second-Generation High-Temperature Superconducting Coils and Their Applications for Energy Storage
Author: Weijia Yuan
Publisher: Springer Science & Business Media
Total Pages: 155
Release: 2011-06-24
Genre: Technology & Engineering
ISBN: 0857297422

Second-Generation High-Temperature Superconducting Coils and Their Applications for Energy Storage addresses the practical electric power applications of high-temperature superconductors. It validates the concept of a prototype energy storage system using newly available 2G HTS conductors by investigating the process of building a complete system from the initial design to the final experiment. It begins with a clear introduction of the related background and then presents a comprehensive design of a superconducting energy storage system that can store maximum energy using a limited length of superconductors. The author has created a modeling environment for analysis of the system and also presents experimental results that are highly consistent with his theoretical calculations.

Principles of Energy Storage Systems

Principles of Energy Storage Systems
Author: Puthalpet Jayarama Reddy
Publisher: BSP Books
Total Pages: 364
Release:
Genre: Science
ISBN: 9395038071

Energy storage is central for the entire grid, improving resources from wind, solar and hydro to nuclear and fossil fuels, to demand side resources and system efficiency benefits. Energy storage can be performed as a generation, transmission, or distribution asset, and times in a single asset. Energy storage is an enabling technology. When the sun isn't shining or the wind isn't blowing, energy storage can support. When demand shifts and baseload resources can't react quickly enough, again energy storage can support. It saves consumer cost, improves reliability and resilience, integrates generation sources, and helps reduce environmental impacts. This book discusses these aspects while comprehensively covering several energy storage technologies in operation and the ones under demonstration and development. Numerous references are cited for the reader to hunt for more details and if interested in research further. It serves as a text/reference book for students and as a manual for those in the industry and for policy makers. About the Energy Storage: United Nation's Secretary-general António Gueterres, speaking at the launch of the World Meteorological Organization's state of the global climate report on 18th may 2022, said: “First, renewable energy technologies, such as battery storage, must be treated as essential and freely available global public goods. Removing obstacles to knowledge sharing and technological transfer is crucial for a rapid and fair renewable energy transition. Storing renewable electricity is often cited as the greatest barrier to the clean energy transition. I am therefore calling for a global coalition on battery storage to fast-track innovation and deployment – a coalition led and driven by governments, bringing together tech companies, manufacturers, and financiers.” “VRE resources such as wind and solar depend on daily and seasonal variations and weather fluctuations; they aren't always available to be dispatched to follow electricity demand……. Energy storage can help VRE-dominated electricity systems balance electricity supply and demand while maintaining reliability in a cost-effective manner….” Says MIT Energy Initiative Director Robert Armstrong, Chevron Professor of Chemical Engineering and chair of the Future of Energy Storage study. The MIT Energy Initiative report confirms that energy storage makes deep decarbonization of reliable electric power systems affordable. “There is no better solution to achieve energy security at present other than the solar and wind energy solutions, coupled with storage systems such as batteries and pumps…….” Says Ajay Mathur, Director General of International Solar Alliance.

Optimization of the Fuel Cell Renewable Hybrid Power Systems

Optimization of the Fuel Cell Renewable Hybrid Power Systems
Author: Nicu Bizon
Publisher: Springer Nature
Total Pages: 350
Release: 2020-02-11
Genre: Technology & Engineering
ISBN: 303040241X

This book offers a comprehensive review of renewable energy sources and optimization strategies in hybrid power systems (HPSs). It analyses the main issues and challenges in the renewable (REW) HPS field, particularly those using fuel cell (FC) systems as their main source of energy. It then offers innovative solutions to these issues, comparing them to solutions currently found in the literature. The book discusses optimization algorithms and energy management strategies. The focus is chiefly on FC net power maximization and fuel economy strategies based on global optimization. The last two chapters discuss energy harvesting from photovoltaic systems and how to mitigate energy variability in REW FC HPS. The main content is supplemented by numerous examples and simulations. Academics, students and practitioners in relevant industrial branches interested in REW HPS finds it of considerable interest, as a reference book or for building their own HPSs based on the examples provided.

100 Years of Superconductivity

100 Years of Superconductivity
Author: Horst Rogalla
Publisher: Taylor & Francis
Total Pages: 866
Release: 2011-11-11
Genre: Science
ISBN: 143984948X

Even a hundred years after its discovery, superconductivity continues to bring us new surprises, from superconducting magnets used in MRI to quantum detectors in electronics. 100 Years of Superconductivity presents a comprehensive collection of topics on nearly all the subdisciplines of superconductivity. Tracing the historical developments in supe

Development of high-temperature superconductor cables for high direct current applications

Development of high-temperature superconductor cables for high direct current applications
Author: Preuß, Alan
Publisher: KIT Scientific Publishing
Total Pages: 194
Release: 2021-01-14
Genre: Technology & Engineering
ISBN: 3731510413

A design process for HTS DC cables was developed for high current applications. Based on the design process, a 35 kA HTS DC cable demonstrator was developed. The superconducting elements of the demonstrator were manufactured and tested individually at 77 K. Afterwards, the demonstrator cable was assembled and tested at 77 K. The assembled demonstrator successfully reached 35 kA at 77 K and self field conditions.

Fundamentals of Magnetic Thermonuclear Reactor Design

Fundamentals of Magnetic Thermonuclear Reactor Design
Author: Vasilij A. Glukhikh
Publisher: Woodhead Publishing
Total Pages: 476
Release: 2018-05-21
Genre: Technology & Engineering
ISBN: 0081024711

Fundamentals of Magnetic Thermonuclear Reactor Design is a comprehensive resource on fusion technology and energy systems written by renowned scientists and engineers from the Russian nuclear industry. It brings together a wealth of invaluable experience and knowledge on controlled thermonuclear fusion (CTF) facilities with magnetic plasma confinement – from the first semi-commercial tokamak T-3, to the multi-billion international experimental thermonuclear reactor ITER, now in construction in France. As the INTOR and ITER projects have made an immense contribution in the past few decades, this book focuses on its practical engineering aspects and the basics of technical physics and electrical engineering. Users will gain an understanding of the key ratios between plasma and technical parameters, design streamlining algorithms and engineering solutions. - Written by a team of qualified experts who have been involved in the design of thermonuclear reactors for over 50 years - Outlines the most important features of the ITER project in France which is building the largest tokamak, including the design, material selection, safety and economic considerations - Includes data on how to design magnetic fusion reactors using CAD tools, along with relevant regulatory documents

Superconducting Accelerator Magnets

Superconducting Accelerator Magnets
Author: K.-H. Mess
Publisher: World Scientific
Total Pages: 236
Release: 1996
Genre: Science
ISBN: 9789810227906

The main topic of the book are the superconducting dipole and quadrupole magnets needed in high-energy accelerators and storage rings for protons, antiprotons or heavy ions. The basic principles of low-temperature superconductivity are outlined with special emphasis on the effects which are relevant for accelerator magnets. Properties and fabrication methods of practical superconductors are described. Analytical methods for field calculation and multipole expansion are presented for coils without and with iron yoke. The effect of yoke saturation and geometric distortions on field quality is studied. Persistent magnetization currents in the superconductor and eddy currents the copper part of the cable are analyzed in detail and their influence on field quality and magnet performance is investigated. Superconductor stability, quench origins and propagation and magnet protection are addressed. Some important concepts of accelerator physics are introduced which are needed to appreciate the demanding requirements on field quality in large storage rings. The operational experience with the superconducting HERA collider serves as an illustration. Finally superconducting correction coils and practical construction and fabrication methods of accelerator magnets are discussed. The physical and technical principles described in the book are substantiated with a wealth of experimental data on multipoles, persistent- and eddy-current effects, quench performance and much more.