Developments in Corrosion Protection

Developments in Corrosion Protection
Author: Mahmood Aliofkhazraei
Publisher: BoD – Books on Demand
Total Pages: 712
Release: 2014-02-20
Genre: Technology & Engineering
ISBN: 9535112236

One of the first thing that comes to your mind after hearing the term “corrosion” is corrosion of a metal. Corrosion is a basically harmful phenomenon, but it can be useful in some cases. For instance, environment’s pollution with corrosion products and damage to the performance of a system are among its harmful effects, whereas electric energy generation in a battery and cathodic protection of many structures are among its advantages. However, these advantages are almost nothing as compared to the costs and effects imposed by its detrimental influences. The enormous costs of this phenomenon can be better understand through studying the published statistics on direct and indirect corrosion damages on economy of governments. The direct cost of corrosion is near 3 % of the gross domestic product (GDP) of USA. Considering this huge cost, it is necessary to develop and expand the corrosion science and its protection technologies.

Synthesis, Characterization, and Laser Refrigeration of Rare-earth Doped Fluoride Nanostructures

Synthesis, Characterization, and Laser Refrigeration of Rare-earth Doped Fluoride Nanostructures
Author: Xuezhe Zhou
Publisher:
Total Pages: 102
Release: 2017
Genre:
ISBN:

Rare-earth (RE) doped materials with unique 4f electronic structures show special optical phenomena at the macro- and microscale, which are commonly studied through laser-mediated experiments. Recently, RE doped nanocrystals have been intensively studied for various applications, including bioimaging, biolabeling, photodynamic therapy, catalysis, solar cells, color displays, light emitting diodes, low-threshold lasers, high temperature sensors, and many others. For the last five years in the Pauzauskie lab, I have been focusing on developing new methods for synthesizing and characterizing engineered micro- and nano-scale RE-doped nanocrystals for investigating the interaction of light with condensed matter, especially laser cooling through anti-Stokes fluorescence. The main method utilized for laser cooling in the Pauzauskie lab is optical trapping with laser tweezers. A brief introduction to laser cooling and optical trapping is included in Chapter 1 of this thesis. The remaining chapters describe the development and characterization of different phases of RE doped nanocrystals which can be optically trapped for nanoscale laser cooling and thermometry with laser tweezers. In Chapter 2, different methods of synthesizing fluoride nanocrystals are introduced and compared based on the requirements for the nanocrystals. A low-cost, scalable, and environmentally friendly hydrothermal method has been specifically introduced for fabricating both LiYF4 (YLF) and NaYF4 nanostructures. Due to the hermetic conditions inherent to hydrothermal synthesis, the growth mechanism of RE doped fluoride nanocrystals is unclear. Chapter 3 presents a systematic study on the synthetic mechanism of hydrothermal synthesis of sodium yttrium fluoride nanocrystals. Various cutting edge techniques, including ’in-situ’ TEM, EDS, XANES, EXAFS, and APT, are used to investigate the fundamental properties and growth mechanisms of RE doped fluoride nanocrystals in both Chapter 2 and 3. Chapter 4 describes the first experimental demonstration of laser cooling of Yb3+ doped YLF nanocrystals in aqueous media, which is explained by anti-Stokes fluorescence. The Yb3+ ions inside the crystal absorb laser photons and emit a mean higher energy fluorescence to extract heat from the crystal lattice. This unprecedented laser cooling in a condensed phase is achieved through home-built laser tweezers with a temperature extraction technique based on cold Brownian motion analysis. Furthermore, crystals of NaYF4, predicted to be a good host structure for laser cooling, are also experimentally proven for laser cooling in aqueous medium for the first time. The ability to optically generate local refrigeration fields around individual nanocrystals promises to enable precise optical temperature control within integrated electronic/photonic/microfluidic circuits, as well as thermal modulation of basic biomolecular processes. In Chapter 5, nanoscale thermometry of RE doped fluoride nanocrystals using spectroscopy methods has been applied on both single nanocrystals and ensembles of nanocrystals. The radiative relaxation rate of a single nanocrystal is studied with varying the local density of states of emitting dipoles through tuning the distance between the optically trapped nanocrystal and a nearby dielectric substrate. Lifetime thermometry is developed through a low-cost and compact avalanche photodiode with live data extraction and processing in LabVIEW, which can accurately and quickly probe the local temperature. In addition, optical trapping of individual nanocrystals with laser tweezers can provide precise temperature sensing at different locations in the nanoscale. Chapter 6 presents a summary of the thesis, along with a short discussion of future research directions for laser cooling of nanocrystals.

Rare Earth Oxide Fluoride Nanoparticles and Hydrothermal Method for Forming Nanoparticles

Rare Earth Oxide Fluoride Nanoparticles and Hydrothermal Method for Forming Nanoparticles
Author:
Publisher:
Total Pages:
Release: 2001
Genre:
ISBN:

A hydrothermal method for forming nanoparticles of a rare earth element, oxygen and fluorine has been discovered. Nanoparticles comprising a rare earth element, oxygen and fluorine are also described. These nanoparticles can exhibit excellent refractory properties as well as remarkable stability in hydrothermal conditions. The nanoparticles can exhibit excellent properties for numerous applications including fiber reinforcement of ceramic composites, catalyst supports, and corrosion resistant coatings for high-temperature aqueous solutions.

Iron-based Nanoparticles: Investigating the Nanostructure, Surface Chemistry, and Reactions with Environmental Contaminants

Iron-based Nanoparticles: Investigating the Nanostructure, Surface Chemistry, and Reactions with Environmental Contaminants
Author: Weile Yan
Publisher:
Total Pages: 270
Release: 2011
Genre:
ISBN: 9781124655727

Nanoscale zero-valent iron (nZVI) is one of the most extensively applied nanomaterials for groundwater and hazardous waste treatment. Despite its high potential for environmental applications, there is limited knowledge about the fundamental properties of nZVI, particularly, its structure, surface composition, and changes in these characteristics in the aqueous media as the nanoparticles interact with aqueous contaminants. This research aims to investigate the structure and surface chemistry of nZVI and to understand how these attributes influence the material's reactivity towards various water contaminants. This work first involved a detailed examination of the metallic-core-oxide-shell structure using a variety of microscopic and spectroscopic tools. It was found that the polycrystalline metallic iron nuclei are spontaneously enclosed by a disordered layer of iron oxide that is 2--3 nm thick. Using a group of water contaminants (Hg(II), Zn(II) and hydrogen sulfide) as molecular probes, it was shown that the nanoparticles were able to utilize multiple pathways including adsorption, precipitation, reduction and surface mineralization to effectively immobilize these contaminants. The observed multiplexed reactivity is imparted by the particular core-shell configuration allowing both the oxide and metal components to exert their reactive tendency without undue kinetic hindrance. The second theme of this research was to examine the structural changes experienced by Pd-doped nZVI during exposure to aqueous media. With scanning-TEM X-ray energy-dispersive spectroscopy (STEM-XEDS), the translocation of Pd from the surface to regions underneath the oxide layer and the rapid loss of the Fe(0) core due to accelerated aqueous corrosion were observed. The morphological changes resulted in a severe reduction in the reductive dechlorination rate of trichloroethylene (TCE), suggesting that the activity of Pd-doped nZVI is a dynamic function of time and particle structure. The close relationship between the structure and reactivity of nZVI is further illustrated by reactions with aqueous arsenite (As(III)). Notably, nZVI caused simultaneous oxidation and reduction of arsenite in the solid phase. Using depth-resolved high-resolution X-ray photoelectron spectroscopy (HR-XPS), multi-layered distributions of different arsenic valence states in the nanoparticles were observed, where the oxidized arsenic (As(V)) was predominantly present at the surface and the reduced form (As(0)) was located at the oxide/metal interface. The observed dual redox capability is therefore enabled by the metal core and oxide layer independently. The findings presented in this work establish that nZVI possesses more complex functionality than bulk-scale ZVI or iron oxides. The improved understanding of sequestration mechanisms studied here may inform optimal design of nZVI treatment systems and aid development of materials and new applications.

Understanding Dopant Site Preferences in Doped Iron Oxide Nanoparticles

Understanding Dopant Site Preferences in Doped Iron Oxide Nanoparticles
Author: Vanessa LaVelle Karandi Pool
Publisher:
Total Pages: 330
Release: 2012
Genre: Ferric oxide
ISBN:

The dopant behavior of spinels has been investigated for over half a century and yet new insight into this class of materials is still being made today. The dominating question has been "Into which site in the spinel structure does the dopant substitute?". In this work, we will explore this question for the nanoparticle regime. Through this work the potential for a relaxation of the normal strains that can arise in a bulk crystal structure is demonstrated in nanoparticles. The hypothesis that this relaxation can lead to unconventional dopant site preferences for dopants in an iron oxide spinel structure is demonstrated. Nanoparticles ranging from 6 nm to 15 nm in diameter have been synthesized with vanadium, manganese, zinc and gallium doped into the iron oxide spinels. The size and structure of the nanoparticles was investigated with transmission electron microscope and X-ray scattering pair distribution functions. The dopant's valence state was investigated with X-ray absorption spectroscopy and the coordination and magnetic properties of the materials were investigated with X-ray magnetic circular dichroism. Alternating current magnetic susceptibility was used to determine the degree of interaction between the particles, and in the case of non-interacting particles, anisotropy energies were extracted. In this study the dopant atoms were found to behave similarly to their bulk counterparts, with the important exception of manganese and vanadium. Manganese doped iron-oxide nanoparticles show clear evidence of crystalline relaxation. Vanadium substituted into the preferred tetrahedral site in the nanoparticle form, unlike the bulk behavior. Both observations are attributed to the accommodating relaxation found in nanoparticles.

Chemical Solution Deposition of Functional Oxide Thin Films

Chemical Solution Deposition of Functional Oxide Thin Films
Author: Theodor Schneller
Publisher: Springer Science & Business Media
Total Pages: 801
Release: 2014-01-24
Genre: Technology & Engineering
ISBN: 3211993118

This is the first text to cover all aspects of solution processed functional oxide thin-films. Chemical Solution Deposition (CSD) comprises all solution based thin- film deposition techniques, which involve chemical reactions of precursors during the formation of the oxide films, i. e. sol-gel type routes, metallo-organic decomposition routes, hybrid routes, etc. While the development of sol-gel type processes for optical coatings on glass by silicon dioxide and titanium dioxide dates from the mid-20th century, the first CSD derived electronic oxide thin films, such as lead zirconate titanate, were prepared in the 1980’s. Since then CSD has emerged as a highly flexible and cost-effective technique for the fabrication of a very wide variety of functional oxide thin films. Application areas include, for example, integrated dielectric capacitors, ferroelectric random access memories, pyroelectric infrared detectors, piezoelectric micro-electromechanical systems, antireflective coatings, optical filters, conducting-, transparent conducting-, and superconducting layers, luminescent coatings, gas sensors, thin film solid-oxide fuel cells, and photoelectrocatalytic solar cells. In the appendix detailed “cooking recipes” for selected material systems are offered.

Nanostructure Science and Technology

Nanostructure Science and Technology
Author: Richard W. Siegel
Publisher: Springer Science & Business Media
Total Pages: 378
Release: 1999-09-30
Genre: Technology & Engineering
ISBN: 9780792358541

Timely information on scientific and engineering developments occurring in laboratories around the world provides critical input to maintaining the economic and technological strength of the United States. Moreover, sharing this information quickly with other countries can greatly enhance the productivity of scientists and engineers. These are some of the reasons why the National Science Foundation (NSF) has been involved in funding science and technology assessments comparing the United States and foreign countries since the early 1980s. A substantial number of these studies have been conducted by the World Technology Evaluation Center (WTEC) managed by Loyola College through a cooperative agreement with NSF. The National Science and Technology Council (NSTC), Committee on Technology's Interagency Working Group on NanoScience, Engineering and Technology (CT/IWGN) worked with WTEC to develop the scope of this Nanostucture Science and Technology report in an effort to develop a baseline of understanding for how to strategically make Federal nanoscale R&D investments in the coming years. The purpose of the NSTC/WTEC activity is to assess R&D efforts in other countries in specific areas of technology, to compare these efforts and their results to U. S. research in the same areas, and to identify opportunities for international collaboration in precompetitive research. Many U. S. organizations support substantial data gathering and analysis efforts focusing on nations such as Japan. But often the results of these studies are not widely available. At the same time, government and privately sponsored studies that are in the public domain tend to be "input" studies.

Glass Ceramic Technology

Glass Ceramic Technology
Author: Wolfram Holand
Publisher: John Wiley & Sons
Total Pages: 456
Release: 2012-06-08
Genre: Technology & Engineering
ISBN: 1118265920

Glass-ceramic materials share many properties with both glass and more traditional crystalline ceramics. This new edition examines the various types of glass-ceramic materials, the methods of their development, and their countless applications. With expanded sections on biomaterials and highly bioactive products (i.e., Bioglass and related glass ceramics), as well as the newest mechanisms for the development of dental ceramics and theories on the development of nano-scaled glass-ceramics, here is a must-have guide for ceramic and materials engineers, managers, and designers in the ceramic and glass industry.