Structural Concrete Textbook - Vol 3, first edition

Structural Concrete Textbook - Vol 3, first edition
Author: fib Fédération internationale du béton
Publisher: fib Fédération internationale du béton
Total Pages: 320
Release: 1999
Genre: Technology & Engineering
ISBN: 2883940436
GET BOOK

The development of reinforced and prestressed concrete during the last 50 years was highly promoted by the ”Comité Euro-international du Béton (CEB)“ and the ”Fédération Internationale de la Précontrainte (FIP)“. In 1998 these two associations merged, forming the ”Fédération Internationale du Béton (fib)“. The results of CEB and FIP had been distributed in different ways, such as 'CEB Bulletins d'Information', FIP–Reports, FIP–Notes and CEB–News. These Bulletins or reports comprised various kinds of information, such as State-of-the-Art-Reports, Research Reports, Application Manuals, Guides to Good Practice and the CEB/FIP Model Codes 1978 and 1990. These Model Codes provided design principles and application rules to the structural engineering profession and have been predominantly used for code drafting by many national and international standardizing bodies. The Textbook on Structural Concrete is now intended to provide background information and justification especially for the CEB/FIP Model Code 90 and in some fields of recently extended knowledge. It is addressed to advanced students: this means that basic information on structural analysis and behaviour of structural concrete is a required prerequisite. Practising structural engineers may utilize it for gaining background information on the CEB/FIP Model Code 90 (and national or regional codes as for ex. EUROCODE 2, based on MC 90). The Textbook is also conceived to assist teachers at technical universities or engineering schools to achieve better understanding of the recent theories on structural concrete. Having these targets in mind the General Assembly of CEB decided already in 1995 to set-up a Special Activity Group ”Dissemination of Knowledge“ to realise that work. The authors invited to draft the different chapters had been mostly involved already in drafting the Model Code 90. In this way consistent information could be provided, both for the code and the textbook. Each chapter has been thoroughly discussed and commented within the Special Activity Group 2. This textbook was first presented to fib members during the Technical Activity Workshop in October 1999 in Prague, held in connection with the first fib symposium. The authors are looking forward to receiving comments from various corners.

Structural Concrete Textbook Vol. 1, first edition

Structural Concrete Textbook Vol. 1, first edition
Author: fib Fédération internationale du béton
Publisher: fib Fédération internationale du béton
Total Pages: 252
Release: 1999-01-01
Genre: Technology & Engineering
ISBN: 9782883940413
GET BOOK

The development of reinforced and prestressed concrete during the last 50 years was highly promoted by the ”Comité Euro-international du Béton (CEB)“ and the ”Fédération Internationale de la Précontrainte (FIP)“. In 1998 these two associations merged, forming the ”Fédération Internationale du Béton (fib)“. The results of CEB and FIP had been distributed in different ways, such as 'CEB Bulletins d'Information', FIP–Reports, FIP–Notes and CEB–News. These Bulletins or reports comprised various kinds of information, such as State-of-the-Art-Reports, Research Reports, Application Manuals, Guides to Good Practice and the CEB/FIP Model Codes 1978 and 1990. These Model Codes provided design principles and application rules to the structural engineering profession and have been predominantly used for code drafting by many national and international standardizing bodies. The Textbook on Structural Concrete is now intended to provide background information and justification especially for the CEB/FIP Model Code 90 and in some fields of recently extended knowledge. It is addressed to advanced students: this means that basic information on structural analysis and behaviour of structural concrete is a required prerequisite. Practising structural engineers may utilize it for gaining background information on the CEB/FIP Model Code 90 (and national or regional codes as for ex. EUROCODE 2, based on MC 90). The Textbook is also conceived to assist teachers at technical universities or engineering schools to achieve better understanding of the recent theories on structural concrete. Having these targets in mind the General Assembly of CEB decided already in 1995 to set-up a Special Activity Group ”Dissemination of Knowledge“ to realise that work. The authors invited to draft the different chapters had been mostly involved already in drafting the Model Code 90. In this way consistent information could be provided, both for the code and the textbook. Each chapter has been thoroughly discussed and commented within the Special Activity Group 2. This textbook was first presented to fib members during the Technical Activity Workshop in October 1999 in Prague, held in connection with the first fib symposium. The authors are looking forward to receiving comments from various corners.

Punching of Structural Concrete Slabs

Punching of Structural Concrete Slabs
Author: fib Fédération internationale du béton
Publisher: fib Fédération internationale du béton
Total Pages: 314
Release: 2001-01-01
Genre: Technology & Engineering
ISBN: 2883940525
GET BOOK

Punching is considered to be one of the most difficult problems in structural concrete design and mechanical models or theoretical analyses were developed rather late in the history of concrete research attempts. This fib Bulletin reviews the development of design models and theoretical analyses since the CEB Bulletin 168 Punching Shear in Reinforced Concrete - State-of-the-Art Report published in 1985. The role of the concrete tensile strength was specially addressed. In this respect the present bulletin is also following-up the CEB Bulletin 237 Concrete Tension and Size Effects - Utilisation of concrete tension in structural concrete design and relevance of size effect - Contributions from CEB Task Group 2.7 published in 1997. Apart from new theoretical developments a comprehensive databank for comparisons with experimental evidence is included. About 400 punching tests were critically reviewed and evaluated in a consistent manner. This is thought to be the first step towards a generally agreed selection of reliable tests. The evident value of such a data bank is illustrated by comparisons carried out between the data and some of the analytical proposals as well as empirical code formulas. List of contents : (1) Introduction, (2) Code equations, (3) Mechanical models for punching, (4) New developments for mechanical models, (5) Numerical investigations, (7) Comparison of mechanical models and test results of slabs without shear reinforcement, (8) Comparison of code rules and tests of flat slabs without shear reinforcement, (9) Comparison of codes, models and tests of flat slabs with shear reinforcement, (10) Experimental investigations, (11) Summary and conclusions, References, Appendices : (I) Databank on slabs without shear reinforcement, (II) Databank on slabs with shear reinforcement, (III) Comparison of test data with code rules, (IV) Comparison of test data with selected models, (V) Notations.

Structural Concrete Textbook, Volume 4

Structural Concrete Textbook, Volume 4
Author: fib Fédération internationale du béton
Publisher: fib Fédération internationale du béton
Total Pages: 203
Release: 2010-06-01
Genre: Technology & Engineering
ISBN: 2883940940
GET BOOK

The second edition of the Structural Concrete Textbook is an extensive revision that reflects advances in knowledge and technology over the past decade. It was prepared in the intermediate period from the CEP-FIP Model Code 1990 (MC90) to fib Model Code for Concrete Structures 2010 (MC2010), and as such incorporates a significant amount of information that has been already finalized for MC2010, while keeping some material from MC90 that was not yet modified considerably. The objective of the textbook is to give detailed information on a wide range of concrete engineering from selection of appropriate structural system and also materials, through design and execution and finally behaviour in use. The revised fib Structural Concrete Textbook covers the following main topics: phases of design process, conceptual design, short and long term properties of conventional concrete (including creep, shrinkage, fatigue and temperature influences), special types of concretes (such as self compacting concrete, architectural concrete, fibre reinforced concrete, high and ultra high performance concrete), properties of reinforcing and prestressing materials, bond, tension stiffening, moment-curvature, confining effect, dowel action, aggregate interlock; structural analysis (with or without time dependent effects), definition of limit states, control of cracking and deformations, design for moment, shear or torsion, buckling, fatigue, anchorages, splices, detailing; design for durability (including service life design aspects, deterioration mechanisms, modelling of deterioration mechanisms, environmental influences, influences of design and execution on durability); fire design (including changes in material and structural properties, spalling, degree of deterioration), member design (linear members and slabs with reinforcement layout, deep beams); management, assessment, maintenance, repair (including, conservation strategies, risk management, types of interventions) as well as aspects of execution (quality assurance), formwork and curing. The updated textbook provides the basics of material and structural behaviour and the fundamental knowledge needed for the design, assessment or retrofitting of concrete structures. It will be essential reading material for graduate students in the field of structural concrete, and also assist designers and consultants in understanding the background to the rules they apply in their practice. Furthermore, it should prove particularly valuable to users of the new editions of Eurocode 2 for concrete buildings, bridges and container structures, which are based only partly on MC90 and partly on more recent knowledge which was not included in the 1999 edition of the textbook.

Structural Concrete Textbook, Volume 5

Structural Concrete Textbook, Volume 5
Author: fib Fédération internationale du béton
Publisher: fib Fédération internationale du béton
Total Pages: 482
Release: 2012-06-01
Genre: Technology & Engineering
ISBN: 2883941025
GET BOOK

The third edition of the Structural Concrete Textbook is an extensive revision that reflects advances in knowledge and technology over the past decade. It was prepared in the intermediate period from the CEP-FIP Model Code 1990 (MC90) tofib Model Code for Concrete Structures 2010 (MC2010), and as such incorporates a significant amount of information that has been already finalized for MC2010, while keeping some material from MC90 that was not yet modified considerably. The objective of the textbook is to give detailed information on a wide range of concrete engineering from selection of appropriate structural system and also materials, through design and execution and finally behaviour in use. The revised fib Structural Concrete Textbook covers the following main topics: phases of design process, conceptual design, short and long term properties of conventional concrete (including creep, shrinkage, fatigue and temperature influences), special types of concretes (such as self compacting concrete, architectural concrete, fibre reinforced concrete, high and ultra high performance concrete), properties of reinforcing and prestressing materials, bond, tension stiffening, moment-curvature, confining effect, dowel action, aggregate interlock; structural analysis (with or without time dependent effects), definition of limit states, control of cracking and deformations, design for moment, shear or torsion, buckling, fatigue, anchorages, splices, detailing; design for durability (including service life design aspects, deterioration mechanisms, modelling of deterioration mechanisms, environmental influences, influences of design and execution on durability); fire design (including changes in material and structural properties, spalling, degree of deterioration), member design (linear members and slabs with reinforcement layout, deep beams); management, assessment, maintenance, repair (including, conservation strategies, risk management, types of interventions) as well as aspects of execution (quality assurance), formwork and curing. The updated textbook provides the basics of material and structural behaviour and the fundamental knowledge needed for the design, assessment or retrofitting of concrete structures. It will be essential reading material for graduate students in the field of structural concrete, and also assist designers and consultants in understanding the background to the rules they apply in their practice. Furthermore, it should prove particularly valuable to users of the new editions of Eurocode 2 for concrete buildings, bridges and container structures, which are based only partly on MC90 and partly on more recent knowledge which was not included in the 1999 edition of the textbook.

fib Model Code for Concrete Structures 2010

fib Model Code for Concrete Structures 2010
Author: fib - federation internationale du beton
Publisher: John Wiley & Sons
Total Pages: 434
Release: 2013-12-04
Genre: Technology & Engineering
ISBN: 3433030618
GET BOOK

The International Federation for Structural Concrete (fib) is a pre-normative organization. 'Pre-normative' implies pioneering work in codification. This work has now been realized with the fib Model Code 2010. The objectives of the fib Model Code 2010 are to serve as a basis for future codes for concrete structures, and present new developments with regard to concrete structures, structural materials and new ideas in order to achieve optimum behaviour. The fib Model Code 2010 is now the most comprehensive code on concrete structures, including their complete life cycle: conceptual design, dimensioning, construction, conservation and dismantlement. It is expected to become an important document for both national and international code committees, practitioners and researchers. The fib Model Code 2010 was produced during the last ten years through an exceptional effort by Joost Walraven (Convener; Delft University of Technology, The Netherlands), Agnieszka Bigaj-van Vliet (Technical Secretary; TNO Built Environment and Geosciences, The Netherlands) as well as experts out of 44 countries from five continents.

Externally Bonded FRP Reinforcement for RC Structures

Externally Bonded FRP Reinforcement for RC Structures
Author: fib Fédération internationale du béton
Publisher: fib Fédération internationale du béton
Total Pages: 176
Release: 2001-01-01
Genre: Technology & Engineering
ISBN: 9782883940543
GET BOOK

In December 1996, the then CEB established a Task Group with the main objective to elaborate design guidelines for the use of FRP reinforcement in accordance with the design format of the CEB-FIP Model Code and Eurocode2. With the merger of CEB and FIP into fib in 1998, this Task Group became fib TG 9.3 FRP Reinforcement for concrete structures in Commission 9 Reinforcing and Prestressing Materials and Systems. The Task Group consists of about 60 members, representing most European universities, research institutes and industrial companies working in the field of advanced composite reinforcement for concrete structures, as well as corresponding members from Canada, Japan and USA. Meetings are held twice a year and on the research level its work is supported by the EU TMR (European Union Training and Mobility of Researchers) Network "ConFibreCrete”. The work of fib TG 9.3 is performed by five working parties (WP): Material Testing and Characterization (MT&C) Reinforced Concrete (RC) Prestressed Concrete (PC) Externally Bonded Reinforcement (EBR) Marketing and Applications (M&A) This technical report constitutes the work conducted as of to date by the EBR party. This bulletin gives detailed design guidelines on the use of FRP EBR, the practical execution and the quality control, based on the current expertise and state-of-the-art knowledge of the task group members. It is regarded as a progress report since it is not the aim of this report to cover all aspects of RC strengthening with composites. Instead, it focuses on those aspects that form the majority of the design problems. several of the topics presented are subject of ongoing research and development, and the details of some modelling approaches may be subject to future revisions. as knowledge in this field is advancing rapidly, the work of the EBR WP will continue. Inspite of this limit in scope, considerable effort has been made to present a bulletin that is today’s state-of-art in the area of strengthening of concrete structures by means of externally bonded FRP reinforcement.

Tailor Made Concrete Structures

Tailor Made Concrete Structures
Author: Joost C. Walraven
Publisher: CRC Press
Total Pages: 316
Release: 2008-05-01
Genre: Technology & Engineering
ISBN: 1439828415
GET BOOK

In recent years knowledge of concrete and concrete structures has increased, as has its applications. New types of concrete challenged scientists and engineers, and ecological constraints encouraged the implementation of life cycle design of concrete structures, moving the focus more and more to maintenance and uprating of structures. And since bui

Reinforced Concrete

Reinforced Concrete
Author: James Grierson MacGregor
Publisher: Prentice Hall
Total Pages: 939
Release: 1997
Genre: Reinforced concrete
ISBN: 9780136139850
GET BOOK

Based on the 1995 edition of the American Concrete Institute Building Code, this text explains the theory and practice of reinforced concrete design in a systematic and clear fashion, with an abundance of step-by-step worked examples, illustrations, and photographs. The focus is on preparing students to make the many judgment decisions required in reinforced concrete design, and reflects the author's experience as both a teacher of reinforced concrete design and as a member of various code committees. This edition provides new, revised and expanded coverage of the following topics: core testing and durability; shrinkage and creep; bases the maximum steel ratio and the value of the factor on Appendix B of ACI318-95; composite concrete beams; strut-and-tie models; dapped ends and T-beam flanges. It also expands the discussion of STMs and adds new examples in SI units.