Structural Analysis of Point Defects in Solids

Structural Analysis of Point Defects in Solids
Author: Johann-Martin Spaeth
Publisher: Springer Science & Business Media
Total Pages: 376
Release: 2012-12-06
Genre: Science
ISBN: 3642844057

Strutural Analysis of Point Defects in Solids introduces the principles and techniques of modern electron paramagnetic resonance (EPR) spectroscopy essentialfor applications to the determination of microscopic defect structures. Investigations of the microscopic and electronic structure, and also correlations with the magnetic propertiesof solids, require various multiple magnetic resonance methods, such as ENDOR and optically detected EPR or ENDOR. This book discusses experimental, technological and theoretical aspects of these techniques comprehensively, from a practical viewpoint, with many illustrative examples taken from semiconductors and other solids. The nonspecialist is informed about the potential of the different methods, while the researcher faced with the task of determining defect structures isprovided with the necessary tools, together with much information on computer-aided methods of data analysis and the principles of modern spectrometer design.

Point Defects in Semiconductors and Insulators

Point Defects in Semiconductors and Insulators
Author: Johann-Martin Spaeth
Publisher: Springer Science & Business Media
Total Pages: 508
Release: 2003-01-22
Genre: Technology & Engineering
ISBN: 9783540426950

The precedent book with the title "Structural Analysis of Point Defects in Solids: An introduction to multiple magnetic resonance spectroscopy" ap peared about 10 years ago. Since then a very active development has oc curred both with respect to the experimental methods and the theoretical interpretation of the experimental results. It would therefore not have been sufficient to simply publish a second edition of the precedent book with cor rections and a few additions. Furthermore the application of the multiple magnetic resonance methods has more and more shifted towards materials science and represents one of the important methods of materials analysis. Multiple magnetic resonances are used less now for "fundamental" studies in solid state physics. Therefore a more "pedestrian" access to the meth ods is called for to help the materials scientist to use them or to appreciate results obtained by using these methods. We have kept the two introduc tory chapters on conventional electron paramagnetic resonance (EPR) of the precedent book which are the base for the multiple resonance methods. The chapter on optical detection of EPR (ODEPR) was supplemented by sections on the structural information one can get from "forbidden" transitions as well as on spatial correlations between defects in the so-called "cross relaxation spectroscopy". High-field ODEPR/ENDOR was also added. The chapter on stationary electron nuclear double resonance (ENDOR) was supplemented by the method of stochastic END OR developed a few years ago in Paderborn which is now also commercially available.

Point Defects in Semiconductors and Insulators

Point Defects in Semiconductors and Insulators
Author: Johann-Martin Spaeth
Publisher: Springer Science & Business Media
Total Pages: 497
Release: 2013-04-17
Genre: Technology & Engineering
ISBN: 3642556159

The precedent book with the title "Structural Analysis of Point Defects in Solids: An introduction to multiple magnetic resonance spectroscopy" ap peared about 10 years ago. Since then a very active development has oc curred both with respect to the experimental methods and the theoretical interpretation of the experimental results. It would therefore not have been sufficient to simply publish a second edition of the precedent book with cor rections and a few additions. Furthermore the application of the multiple magnetic resonance methods has more and more shifted towards materials science and represents one of the important methods of materials analysis. Multiple magnetic resonances are used less now for "fundamental" studies in solid state physics. Therefore a more "pedestrian" access to the meth ods is called for to help the materials scientist to use them or to appreciate results obtained by using these methods. We have kept the two introduc tory chapters on conventional electron paramagnetic resonance (EPR) of the precedent book which are the base for the multiple resonance methods. The chapter on optical detection of EPR (ODEPR) was supplemented by sections on the structural information one can get from "forbidden" transitions as well as on spatial correlations between defects in the so-called "cross relaxation spectroscopy". High-field ODEPR/ENDOR was also added. The chapter on stationary electron nuclear double resonance (ENDOR) was supplemented by the method of stochastic END OR developed a few years ago in Paderborn which is now also commercially available.

Defects in Solids

Defects in Solids
Author: Richard J. D. Tilley
Publisher: John Wiley & Sons
Total Pages: 549
Release: 2008-10-10
Genre: Science
ISBN: 047038073X

Provides a thorough understanding of the chemistry and physics of defects, enabling the reader to manipulate them in the engineering of materials. Reinforces theoretical concepts by placing emphasis on real world processes and applications. Includes two kinds of end-of-chapter problems: multiple choice (to test knowledge of terms and principles) and more extensive exercises and calculations (to build skills and understanding). Supplementary material on crystallography and band structure are included in separate appendices.

Point Defects in Semiconductors II

Point Defects in Semiconductors II
Author: J. Bourgoin
Publisher: Springer Science & Business Media
Total Pages: 314
Release: 2012-12-06
Genre: Science
ISBN: 3642818323

In introductory solid-state physics texts we are introduced to the concept of a perfect crystalline solid with every atom in its proper place. This is a convenient first step in developing the concept of electronic band struc ture, and from it deducing the general electronic and optical properties of crystalline solids. However, for the student who does not proceed further, such an idealization can be grossly misleading. A perfect crystal does not exist. There are always defects. It was recognized very early in the study of solids that these defects often have a profound effect on the real physical properties of a solid. As a result, a major part of scientific research in solid-state physics has,' from the early studies of "color centers" in alkali halides to the present vigorous investigations of deep levels in semiconductors, been devoted to the study of defects. We now know that in actual fact, most of the interest ing and important properties of solids-electrical, optical, mechanical- are determined not so much by the properties of the perfect crystal as by its im perfections.

Thermodynamics of Point Defects and Their Relation with Bulk Properties

Thermodynamics of Point Defects and Their Relation with Bulk Properties
Author: P.A. Varotsos
Publisher: Elsevier
Total Pages: 489
Release: 2013-10-22
Genre: Science
ISBN: 148329062X

Defects in Solids, Volume 14: Thermodynamics of Point Defects and Their Relation with Bulk Properties focuses on the methodologies, approaches, and reactions involved in the study of point defects in solids. The book first offers information on thermodynamic functions and formation of vacancies. Topics include parameters from the comparison with isochoric perfect crystal; relation between isobaric and isochoric parameters; temperature dependence of thermodynamic functions of solids; and statistical approach to vacancy parameters. The text then ponders on the formation of other point defects, migration, and thermodynamics of specific heat. The publication explains the analysis of experiments yielding defect parameters, including X-ray parameters, analysis of specific heat measurements, and ionic conductivity and reorientation of dipoles. The text also takes a look at mixed alkali and silver halides, explanation of empirical laws, as well as explanation of the empirical laws connecting activation entropy and enthalpy to the activation volume and variation of the bulk modulus with composition. The selection is a dependable reference for scientists and geophysicists interested in the thermodynamics of point defects.

An Introduction to Composite Materials

An Introduction to Composite Materials
Author: D. Hull
Publisher: Cambridge University Press
Total Pages: 334
Release: 1996-08-13
Genre: Technology & Engineering
ISBN: 1107393183

This edition has been greatly enlarged and updated to provide both scientists and engineers with a clear and comprehensive understanding of composite materials. In describing both theoretical and practical aspects of their production, properties and usage, the book crosses the borders of many disciplines. Topics covered include: fibres, matrices, laminates and interfaces; elastic deformation, stress and strain, strength, fatigue crack propagation and creep resistance; toughness and thermal properties; fatigue and deterioration under environmental conditions; fabrication and applications. Coverage has been increased to include polymeric, metallic and ceramic matrices and reinforcement in the form of long fibres, short fibres and particles. Designed primarily as a teaching text for final-year undergraduates in materials science and engineering, this book will also interest undergraduates and postgraduates in chemistry, physics, and mechanical engineering. In addition, it will be an excellent source book for academic and technological researchers on materials.

Point Defects in Semiconductors I

Point Defects in Semiconductors I
Author: M. Lannoo
Publisher: Springer Science & Business Media
Total Pages: 283
Release: 2012-12-06
Genre: Science
ISBN: 364281574X

From its early beginning before the war, the field of semiconductors has developped as a classical example where the standard approximations of 'band theory' can be safely used to study its interesting electronic properties. Thus in these covalent crystals, the electronic structure is only weakly coupled with the atomic vibrations; one-electron Bloch functions can be used and their energy bands can be accurately computed in the neighborhood of the energy gap between the valence and conduction bands; nand p doping can be obtained by introducing substitutional impurities which only introduce shallow donors and acceptors and can be studied by an effective-mass weak-scattering description. Yet, even at the beginning, it was known from luminescence studies that these simple concepts failed to describe the various 'deep levels' introduced near the middle of the energy gap by strong localized imperfections. These imperfections not only include some interstitial and many substitutional atoms, but also 'broken bonds' associated with surfaces and interfaces, dis location cores and 'vacancies', i.e., vacant iattice sites in the crystal. In all these cases, the electronic structure can be strongly correlated with the details of the atomic structure and the atomic motion. Because these 'deep levels' are strongly localised, electron-electron correlations can also playa significant role, and any weak perturbation treatment from the perfect crystal structure obviously fails. Thus, approximate 'strong coupling' techniques must often be used, in line' with a more chemical de scription of bonding.