Solar Cells and Modules

Solar Cells and Modules
Author: Arvind Shah
Publisher: Springer Nature
Total Pages: 357
Release: 2020-07-16
Genre: Science
ISBN: 3030464873

This book gives a comprehensive introduction to the field of photovoltaic (PV) solar cells and modules. In thirteen chapters, it addresses a wide range of topics including the spectrum of light received by PV devices, the basic functioning of a solar cell, and the physical factors limiting the efficiency of solar cells. It places particular emphasis on crystalline silicon solar cells and modules, which constitute today more than 90 % of all modules sold worldwide. Describing in great detail both the manufacturing process and resulting module performance, the book also touches on the newest developments in this sector, such as Tunnel Oxide Passivated Contact (TOPCON) and heterojunction modules, while dedicating a major chapter to general questions of module design and fabrication. Overall, it presents the essential theoretical and practical concepts of PV solar cells and modules in an easy-to-understand manner and discusses current challenges facing the global research and development community.

Fundamentals of Photovoltaic Modules and Their Applications

Fundamentals of Photovoltaic Modules and Their Applications
Author: G. N. Tiwari
Publisher: Royal Society of Chemistry
Total Pages: 423
Release: 2010
Genre: Science
ISBN: 1849730202

Presently there is no single publication available which covers the topics related to photovoltaic (PV) or photovoltaic thermal (PV/T) technologies, thermal modelling, CO2 mitigation and carbon trading. This book disseminates the current knowledge in the fundamentals of solar energy, photovoltaic (PV) or photovoltaic thermal (PV/T) technologies, energy security and climate change and is aimed at undergraduate and postgraduate students and professionals. The main emphasis of the book is on the design, construction, performance and application of PV and PV/T from the electricity and thermal standpoint. Hot topics covered in the book include: energy security of a nation, climate change, CO2 mitigation and carbon credit earned by using PV or PV/T technologies (Carbon Trading). This information will prove helpful in filling the gap between the researchers and professionals working on the application of photovoltaic and global climate change. It also covers economic, cost effective and sustainable aspects of photovoltaic technologies. The book gives a detailed history of the new technological developments in PV/T systems worldwide with system photographs and references and elaborates on the fundamentals of hybrid systems and their performances with thermal modelling. Energy and exergy analysis, techno-economic analysis and carbon trading are key chapters for research professionals. The book also includes important case studies to aid understanding of the subject for all readers.

Silicon Solar Cell Metallization and Module Technology

Silicon Solar Cell Metallization and Module Technology
Author: Thorsten Dullweber
Publisher: IET
Total Pages: 569
Release: 2021-12-13
Genre: Technology & Engineering
ISBN: 183953155X

Metallization is a key step in manufacturing of efficient and reliable solar cells. Written by world-wide renowned experts, this work covers metallization technologies, before describing ongoing R&D activities for the most relevant silicon solar cells metallization technologies. Later chapters deal with aspects of solar cell modules.

Solar Panels and Photovoltaic Materials

Solar Panels and Photovoltaic Materials
Author: Beddiaf Zaidi
Publisher: BoD – Books on Demand
Total Pages: 160
Release: 2018-07-11
Genre: Technology & Engineering
ISBN: 1789234344

Despite their wide availability and relatively low prices, the conventional energy sources have harmful consequences on the environment and are exhaustible. In order to circumvent these negative effects, the renewable energies in general and the photovoltaic energy in particular are becoming more and more attractive. Solar cell is an electrical device that converts light into electricity at the atomic level. These devices use inorganic or organic semiconductor materials that absorb photons with energy greater than their bandgap to promote energy carriers into their conduction band. They do not pollute the atmosphere by releasing harmful gases, do not require any fuel to produce electricity, and do not move parts so they are rugged. Solar panels have a very long life and do not need much maintenance.

Shell-like Structures

Shell-like Structures
Author: Holm Altenbach
Publisher: Springer
Total Pages: 293
Release: 2016-08-09
Genre: Science
ISBN: 3319422774

The book presents mathematical and mechanical aspects of the theory of plates and shells, applications in civil, aero-space and mechanical engineering, as well in other areas. The focus relates to the following problems:• comprehensive review of the most popular theories of plates and shells,• relations between three-dimensional theories and two-dimensional ones,• presentation of recently developed new refined plates and shells theories (for example, the micropolar theory or gradient-type theories),• modeling of coupled effects in shells and plates related to electromagnetic and temperature fields, phase transitions, diffusion, etc.,• applications in modeling of non-classical objects like, for example, nanostructures,• presentation of actual numerical tools based on the finite element approach.

Thin-Film Silicon Solar Cells

Thin-Film Silicon Solar Cells
Author: Arvind Shah
Publisher: EPFL Press
Total Pages: 472
Release: 2010-08-19
Genre: Technology & Engineering
ISBN: 9781420066746

Photovoltaic technology has now developed to the extent that it is close to fulfilling the vision of a "solar-energy world," as devices based on this technology are becoming efficient, low-cost and durable. This book provides a comprehensive treatment of thin-film silicon, a prevalent PV material, in terms of its semiconductor nature, starting out with the physical properties, but concentrating on device applications. A special emphasis is given to amorphous silicon and microcrystalline silicon as photovoltaic materials, along with a model that allows these systems to be physically described in the simplest manner possible, thus allowing the student or scientist/engineer entering the field of thin-film electronics to master a few basic concepts that are distinct from those in the field of conventional semiconductors. The main part of the book deals with solar cells and modules by illustrating the basic functioning of these devices, along with their limitations, design optimization, testing and fabrication methods. Among the manufacturing processes discussed are plasma-assisted and hot-wire deposition, sputtering, and structuring techniques.

Solar Cells and Their Applications

Solar Cells and Their Applications
Author: Lewis M. Fraas
Publisher: Wiley
Total Pages: 700
Release: 2010-07-13
Genre: Technology & Engineering
ISBN: 0470636874

A major update of solar cell technology and the solar marketplace Since the first publication of this important volume over a decade ago, dramatic changes have taken place with the solar market growing almost 100-fold and the U.S. moving from first to fourth place in the world market as analyzed in this Second Edition. Three bold new opportunities are identified for any countries wanting to improve market position. The first is combining pin solar cells with 3X concentration to achieve economic competitiveness near term. The second is charging battery-powered cars with solar cell–generated electricity from arrays in surrounding areas—including the car owners' homes—while simultaneously reducing their home electricity bills by over ninety percent. The third is formation of economic "unions" of sufficient combined economic size to be major competitors. In this updated edition, feed-in tariffs are identified as the most effective approach for public policy. Reasons are provided to explain why pin solar cells outperform more traditional pn solar cells. Field test data are reported for nineteen percent pin solar cells and for ~500X concentrating systems with bare cell efficiencies approaching forty percent. Paths to bare cell efficiencies over fifty percent are described, and key missing program elements are identified. Since government support is needed for new technology prototype integration and qualification testing before manufacturing scale up, the key economic measure is identified in this volume as the electricity cost in cents per kilowatt-hour at the complete installed system level, rather than just the up-front solar cell modules' costs in dollars per watt. This Second Edition will benefit technologists in the fields of solar cells and systems; solar cell researchers; power systems designers; academics studying microelectronics, semiconductors, and solar cells; business students and investors with a technical focus; and government and political officials developing public policy.

Photovoltaic Solar Energy

Photovoltaic Solar Energy
Author: Angèle Reinders
Publisher: John Wiley & Sons
Total Pages: 755
Release: 2017-02-06
Genre: Technology & Engineering
ISBN: 111892746X

Solar PV is now the third most important renewable energy source, after hydro and wind power, in terms of global installed capacity. Bringing together the expertise of international PV specialists Photovoltaic Solar Energy: From Fundamentals to Applications provides a comprehensive and up-to-date account of existing PV technologies in conjunction with an assessment of technological developments. Key features: Written by leading specialists active in concurrent developments in material sciences, solar cell research and application-driven R&D. Provides a basic knowledge base in light, photons and solar irradiance and basic functional principles of PV. Covers characterization techniques, economics and applications of PV such as silicon, thin-film and hybrid solar cells. Presents a compendium of PV technologies including: crystalline silicon technologies; chalcogenide thin film solar cells; thin-film silicon based PV technologies; organic PV and III-Vs; PV concentrator technologies; space technologies and economics, life-cycle and user aspects of PV technologies. Each chapter presents basic principles and formulas as well as major technological developments in a contemporary context with a look at future developments in this rapidly changing field of science and engineering. Ideal for industrial engineers and scientists beginning careers in PV as well as graduate students undertaking PV research and high-level undergraduate students.

Thin-Film Solar Cells

Thin-Film Solar Cells
Author: Yoshihiro Hamakawa
Publisher: Springer Science & Business Media
Total Pages: 259
Release: 2013-03-09
Genre: Technology & Engineering
ISBN: 3662105497

The first comprehensive book on thin-film solar cells, potentially a key technology for solving the energy production problem in the 21st century in an environmentally friendly way. It covers a wide range of scientific and technological aspects of thin film semiconductors - deposition technologies, growth mechanisms and the basic properties of amorphous and nano-crystalline silicon - as well as the optimum design theory and device physics of high-efficiency solar cells, especially of single-junction and multi-junction solar cells. The development of large-area solar cell modules using single and multi-junction solar cells is also considered. Examples of recent photovoltaic systems are presented and analysed.