Simulation Of Fatigue Behavior Of High Temperature Metal Matrix Composites
Download Simulation Of Fatigue Behavior Of High Temperature Metal Matrix Composites full books in PDF, epub, and Kindle. Read online free Simulation Of Fatigue Behavior Of High Temperature Metal Matrix Composites ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Author | : CC. Chamis |
Publisher | : |
Total Pages | : 12 |
Release | : 1996 |
Genre | : Computational simulations |
ISBN | : |
A generalized relatively new approach is described for the computational simulation of fatigue behavior of high temperature metal matrix composites (HT-MMCs). This theory is embedded in a specialty-purpose computer code. The effectiveness of the computer code to predict the fatigue behavior of HT-MMCs is demonstrated by applying it to a silicon-fiber/titanium-matrix HT-MMC. Comparative results are shown for mechanical fatigue, thermal fatigue, thermomechanical (in-phase and out-of-phase) fatigue, as well as the effects of oxidizing environments on fatigue life. These results show that the new approach reproduces available experimental data remarkably well.
Author | : Michael J. Verrilli |
Publisher | : ASTM International |
Total Pages | : 382 |
Release | : 1996 |
Genre | : |
ISBN | : 080312001X |
Author | : National Aeronautics and Space Administration (NASA) |
Publisher | : Createspace Independent Publishing Platform |
Total Pages | : 26 |
Release | : 2018-06-30 |
Genre | : |
ISBN | : 9781722103989 |
The nonlinear behavior of a high-temperature metal-matrix composite (HT-MMC) was simulated by using the metal matrix composite analyzer (METCAN) computer code. The simulation started with the fabrication process, proceeded to thermomechanical cyclic loading, and ended with the application of a monotonic load. Classical laminate theory and composite micromechanics and macromechanics are used in METCAN, along with a multifactor interaction model for the constituents behavior. The simulation of the stress-strain behavior from the macromechanical and the micromechanical points of view, as well as the initiation and final failure of the constituents and the plies in the composite, were examined in detail. It was shown that, when the fibers and the matrix were perfectly bonded, the fracture started in the matrix and then propagated with increasing load to the fibers. After the fibers fractured, the composite lost its capacity to carry additional load and fractured. Gotsis, Pascal K. Glenn Research Center RTOP 510-10-01...
Author | : Huseyin Sehitoglu |
Publisher | : ASTM International |
Total Pages | : 339 |
Release | : 2000 |
Genre | : Alloys |
ISBN | : 0803128533 |
Author | : |
Publisher | : |
Total Pages | : 28 |
Release | : 1991 |
Genre | : |
ISBN | : |
Author | : Huseyin Sehitoglu |
Publisher | : ASTM International |
Total Pages | : 259 |
Release | : 1993 |
Genre | : AIIoys |
ISBN | : 0803118716 |
Author | : |
Publisher | : |
Total Pages | : 344 |
Release | : 2003 |
Genre | : Alloys |
ISBN | : |
Author | : |
Publisher | : |
Total Pages | : 127 |
Release | : 1994 |
Genre | : |
ISBN | : |
This research extends the existing knowledge of cross-ply metal matrix composites (MMC) to include fatigue behavior under strain-controlled fully reversed loading. This study investigated fatigue life, failure modes and damage mechanisms of the SCS-6/Ti-15-3, (O/9O)2s, MMC. The laminate was subjected to fully reversed fatigue at elevated temperature (427 deg C) at various strain levels. Stress, strain and modulus data were analyzed to characterize the macro-mechanical behavior of the composite. Microscopy and fractography were accomplished to identify and characterize the damage mechanisms at the microscopic level. Failure modes varied according to the maximum applied strain level showing either mixed mode (i.e. combination of both fiber and matrix dominated modes) or matrix dominated fatigue failures. As expected, higher strain loadings resulted in more ductility of the matrix at failure, evidenced by fracture surface features. For testing of the same composite laminate, the fatigue life under strain controlled mode slightly increased, compared to its load-controlled mode counterpart, using the effective strain range comparison basis. However, the respective fatigue life curves converged in the high cycle region, suggesting that the matrix dominated failure mode produces equivalent predicted fatigue lives for both control modes.
Author | : |
Publisher | : |
Total Pages | : 38 |
Release | : 1991 |
Genre | : |
ISBN | : |
Author | : Robert N. Pittman |
Publisher | : |
Total Pages | : 290 |
Release | : 1995 |
Genre | : Metallic composites |
ISBN | : |