Earthquake Geotechnical Engineering

Earthquake Geotechnical Engineering
Author: Kyriazis D. Pitilakis
Publisher: Springer Science & Business Media
Total Pages: 497
Release: 2007-06-14
Genre: Technology & Engineering
ISBN: 1402058934

This book contains the full papers on which the invited lectures of the 4th International Conference on Geotechnical Earthquake Engineering (4ICEGE) were based. The conference was held in Thessaloniki, Greece, from 25 to 28 June, 2007. The papers offer a comprehensive overview of the progress achieved in soil dynamics and geotechnical earthquake engineering, examine ongoing and unresolved issues, and discuss ideas for the future.

Soil Liquefaction during Recent Large-Scale Earthquakes

Soil Liquefaction during Recent Large-Scale Earthquakes
Author: Rolando P. Orense
Publisher: CRC Press
Total Pages: 282
Release: 2014-04-15
Genre: Technology & Engineering
ISBN: 1138026433

Soil Liquefaction during Recent Large-Scale Earthquakes contains selected papers presented at the New Zealand – Japan Workshop on Soil Liquefaction during Recent Large-Scale Earthquakes (Auckland, New Zealand, 2-3 December 2013). The 2010-2011 Canterbury earthquakes in New Zealand and the 2011 off the Pacific Coast of Tohoku Earthquake in Japan have caused significant damage to many residential houses due to varying degrees of soil liquefaction over a very wide extent of urban areas unseen in past destructive earthquakes. While soil liquefaction occurred in naturally-sedimented soil formations in Christchurch, most of the areas which liquefied in Tokyo Bay area were reclaimed soil and artificial fill deposits, thus providing researchers with a wide range of soil deposits to characterize soil and site response to large-scale earthquake shaking. Although these earthquakes in New Zealand and Japan caused extensive damage to life and property, they also serve as an opportunity to understand better the response of soil and building foundations to such large-scale earthquake shaking. With the wealth of information obtained in the aftermath of both earthquakes, information-sharing and knowledge-exchange are vital in arriving at liquefaction-proof urban areas in both countries. Data regarding the observed damage to residential houses as well as the lessons learnt are essential for the rebuilding efforts in the coming years and in mitigating buildings located in regions with high liquefaction potential. As part of the MBIE-JSPS collaborative research programme, the Geomechanics Group of the University of Auckland and the Geotechnical Engineering Laboratory of the University of Tokyo co-hosted the workshop to bring together researchers to review the findings and observations from recent large-scale earthquakes related to soil liquefaction and discuss possible measures to mitigate future damage. Soil Liquefaction during Recent Large-Scale Earthquakes will be of great interest to researchers, academics, industry practitioners and other professionals involved in Earthquake Geotechnical Engineering, Foundation Engineering, Earthquake Engineering and Structural Dynamics.

Geotechnical Earthquake Engineering

Geotechnical Earthquake Engineering
Author: Steven L. Kramer
Publisher: CRC Press
Total Pages: 1061
Release: 2024-11-29
Genre: Technology & Engineering
ISBN: 1040115942

This fully updated second edition provides an introduction to geotechnical earthquake engineering for first-year graduate students in geotechnical or earthquake engineering graduate programs with a level of detail that will also be useful for more advanced students as well as researchers and practitioners. It begins with an introduction to seismology and earthquake ground motions, then presents seismic hazard analysis and performance-based earthquake engineering (PBEE) principles. Dynamic soil properties pertinent to earthquake engineering applications are examined, both to facilitate understanding of soil response to seismic loads and to describe their practical measurement as part of site characterization. These topics are followed by site response and its analysis and soil–structure interaction. Ground failure in the form of soil liquefaction, cyclic softening, surface fault rupture, and seismically induced landslides are also addressed, and the book closes with a chapter on soil improvement and hazard mitigation. The first edition has been widely used around the world by geotechnical engineers as well as many seismologists and structural engineers. The main text of this book and the four appendices: • Cover fundamental concepts in applied seismology, geotechnical engineering, and structural dynamics. • Contain numerous references for further reading, allowing for detailed exploration of background or more advanced material. • Present worked example problems that illustrate the application of key concepts emphasized in the text. • Include chapter summaries that emphasize the most important points. • Present concepts of performance-based earthquake engineering with an emphasis on uncertainty and the types of probabilistic analyses needed to implement PBEE in practice. • Present a broad, interdisciplinary narrative, drawing from the fields of seismology, geotechnical engineering, and structural engineering to facilitate holistic understanding of how geotechnical earthquake engineering is applied in seismic hazard and risk analyses and in seismic design.

Physical Modelling in Geotechnics, Two Volume Set

Physical Modelling in Geotechnics, Two Volume Set
Author: Sarah Springman
Publisher: CRC Press
Total Pages: 1530
Release: 2010-06-17
Genre: Technology & Engineering
ISBN: 0415592887

This book results from the 7th ICPMG meeting in Zurich 2010 and covers a broad range of aspects of physical modelling in geotechnics, linking across to other modelling techniques to consider the entire spectrum required in providing innovative geotechnical engineering solutions. Topics presented at the conference: Soil – Structure – Interaction; Natural Hazards; Earthquake Engineering: Soft Soil Engineering; New Geotechnical Physical; Modelling Facilities; Advanced Experimental Techniques; Comparisons between Physical and Numerical Modelling Specific Topics: Offshore Engineering; Ground Improvement and Foundations; Tunnelling, Excavations and Retaining Structures; Dams and slopes; Process Modelling; Goenvironmental Modelling; Education

Seismic Performance and Simulation of Pile Foundations in Liquefied and Laterally Spreading Ground

Seismic Performance and Simulation of Pile Foundations in Liquefied and Laterally Spreading Ground
Author: Ross W. Boulanger
Publisher:
Total Pages: 344
Release: 2006
Genre: Science
ISBN:

Proceedings of a workshop on Seismic Performance and Simulation of Pile Foundations in Liquefied and Laterally Spreading Ground, held in Davis, California, March 16-18, 2005. Sponsored by the Pacific Earthquake Engineering Research Center; University of California at Berkeley; Center for Urban Earthquake Engineering; Tokyo Institute of Technology; Geo-Institute of ASCE. This collection contains 25 papers that discuss physical measurements and observations from earthquake case histories, field tests in blast-liquefied ground, dynamic centrifuge model studies, and large-scale shaking table studies. Papers contain recent findings on fundamental soil-pile interaction mechanisms, numerical analysis methods, and reviews and evaluations of existing and emerging design methodologies. This proceeding provides comprehensive coverage of a major issue in earthquake engineering practice and hazard mitigation efforts.

Linear and Non-linear Numerical Analysis of Foundations

Linear and Non-linear Numerical Analysis of Foundations
Author: John W. Bull
Publisher: CRC Press
Total Pages: 465
Release: 2009-02-02
Genre: Architecture
ISBN: 0203887778

Correctly understanding, designing and analyzing the foundations that support structures is fundamental to their safety. This book by a range of academic, design and contracting world experts provides a review of the state-of-the-art techniques for modelling foundations using both linear and non linear numerical analysis. It applies to a range of infrastructure, civil engineering and structural engineering projects and allows designers, engineers, architects, researchers and clients to understand some of the advanced numerical techniques used in the analysis and design of foundations. Topics include: Ground vibrations caused by trains Pile-group effects Bearing capacity of shallow foundations under static and seismic conditions Bucket foundation technology for offshore oilfields Seismically induced liquefaction in earth embankment foundations and in pile foundations Free vibrations of industrial chimneys and TV towers with flexibility of the soil Settlements of high rise structures Seepage, stress fields and dynamic responses in dams Site investigation

Offshore Geotechnical Engineering

Offshore Geotechnical Engineering
Author: Mark Randolph
Publisher: CRC Press
Total Pages: 559
Release: 2011-03-18
Genre: Technology & Engineering
ISBN: 1134022166

Design practice in offshore geotechnical engineering has grown out of onshore practice, but the two application areas have tended to diverge over the last thirty years, driven partly by the scale of the foundation and anchoring elements used offshore, and partly by fundamental differences in construction and installation techniques. As a consequence offshore geotechnical engineering has grown as a speciality. The structure of Offshore Geotechnical Engineering follows a pattern that mimics the flow of a typical offshore project. In the early chapters it provides a brief overview of the marine environment, offshore site investigation techniques and interpretation of soil behaviour. It proceeds to cover geotechnical design of piled foundations, shallow foundations and anchoring systems. Three topics are then covered which require a more multi-disciplinary approach: the design of mobile drilling rigs, pipelines and geohazards. This book serves as a framework for undergraduate and postgraduate courses, and will appeal to professional engineers specialising in the offshore industry.

Advances in Computer Methods and Geomechanics

Advances in Computer Methods and Geomechanics
Author: Amit Prashant
Publisher: Springer Nature
Total Pages: 735
Release: 2020-01-14
Genre: Science
ISBN: 9811508860

This volume presents selected papers from IACMAG Symposium,The major themes covered in this conference are Earthquake Engineering, Ground Improvement and Constitutive Modelling. This volume will be of interest to researchers and practitioners in geotechnical and geomechanical engineering.

Geotechnical Engineering for Transportation Projects

Geotechnical Engineering for Transportation Projects
Author: American Society of Civil Engineers. Geo-Institute
Publisher:
Total Pages: 1266
Release: 2004
Genre: Technology & Engineering
ISBN:

GSP 126 contains 223 papers presented at Geo-Trans 2004, held in Los Angeles, California, July 27-31, 2004.