Aggregates in Concrete

Aggregates in Concrete
Author: Mark Alexander
Publisher: CRC Press
Total Pages: 448
Release: 2010-02-25
Genre: Technology & Engineering
ISBN: 0203963695

Bringing together in one volume the latest research and information, this book provides a detailed guide to the selection and use of aggregates in concrete. After an introduction defining the purpose and role of aggregates in concrete, the authors present an overview of aggregate sources and production techniques, followed by a detailed study of their physical, mechanical and chemical properties. This knowledge is then applied to the use of aggregates in both plastic and hardened concretes, and in the overall mix design. Special aggregates and their applications are discussed in detail, as are the current main specifications, standards and tests.

Lea's Chemistry of Cement and Concrete

Lea's Chemistry of Cement and Concrete
Author: Peter Hewlett
Publisher: Elsevier
Total Pages: 1087
Release: 2003-11-12
Genre: Technology & Engineering
ISBN: 0080535410

Lea's Chemistry of Cement and Concrete deals with the chemical and physical properties of cements and concretes and their relation to the practical problems that arise in manufacture and use. As such it is addressed not only to the chemist and those concerned with the science and technology of silicate materials, but also to those interested in the use of concrete in building and civil engineering construction. Much attention is given to the suitability of materials, to the conditions under which concrete can excel and those where it may deteriorate and to the precautionary or remedial measures that can be adopted. First published in 1935, this is the fourth edition and the first to appear since the death of Sir Frederick Lea, the original author. Over the life of the first three editions, this book has become the authority on its subject. The fourth edition is edited by Professor Peter C. Hewlett, Director of the British Board of Agrement and visiting Industrial Professor in the Department of Civil Engineering at the University of Dundee. Professor Hewlett has brought together a distinguished body of international contributors to produce an edition which is a worthy successor to the previous editions.

Advances in Aggregates and Armourstone Evaluation

Advances in Aggregates and Armourstone Evaluation
Author: John-Paul Latham
Publisher: Geological Society of London
Total Pages: 220
Release: 1998
Genre: Architecture
ISBN: 9781862390003

The maintenance and upgrading of our built environment, including large sections of coastal defences, relies heavily on natural construction materials. The text aims to highlight a range of pressing research issues in natural construction materials of direct relevance to an industry facing growing pressures for environmental sustainability and standardization of product quality within Europe. Tests and specifications given in the forthcoming Eurostandards for aggregates and armourstones are considered and correlated with older more widely used tests, including those which could impact upon current road safety. This text should be useful to: aggregate and amourstone suppliers and users; civil and engineering geologists; quarry companies; and Local and County Authority engineers and coastal engineers.

Handbook of advances in Alkali-activated Concrete

Handbook of advances in Alkali-activated Concrete
Author: F. Pacheco-Torgal
Publisher: Woodhead Publishing
Total Pages: 578
Release: 2021-12-03
Genre: Technology & Engineering
ISBN: 0323854702

Advances on Alkali-activated Concrete, provides comprehensive information on materials, structural properties and realistic potential for the application of alkali-activated concretes and cements. Divided over seven key parts, including the design of alkali-activated concrete, their fabrication and curing, rheology, properties of alkali-activated concrete, durability, dynamic performance and LCA, the book will be an essential reference resource for academic and industrial researchers, materials scientists, chemists, manufacturers and civil engineers working with alkali-activated materials and concrete structures. - Provides an essential guide on the latest developments in alkali-activated concrete - Comprehensively examines alkali-activated concrete performance under cyclic loading - Includes concrete systems containing coarser aggregates - Presents several important cases studies of application

Geopolymer Concrete Structures with Steel and FRP Reinforcements

Geopolymer Concrete Structures with Steel and FRP Reinforcements
Author: Mohamed Elchalakani
Publisher: Elsevier
Total Pages: 666
Release: 2023-02-15
Genre: Technology & Engineering
ISBN: 0443188777

Geopolymer Concrete Structures with Steel and FRP Reinforcements: Analysis and Design focuses on structural behavior, including the aspects of compression, bending strength and combined action of GPC members, with the book's content based on published studies over the last two decades. Geopolymer concrete (GPC) structural members reinforced with FRP reinforcement have some advantages in resisting forces compared to conventional concrete or steel tubular members. Among the most important are the high strength and bending stiffness, fire and impact performance and favorable, construction ability and durability. To this end, there are no significant applications of these new structural elements worldwide, partly due to the lack of the understanding of their behavior and insufficient design provisions in different design manuals. This book, therefore, seeks to highlight their characteristics and future potential. - Provides comprehensive, up-to-date advances on Geopolymer Concrete (GPC) reinforced with steel and FRP bars and stirrups construction with a summary of over 100 papers published in the last decade - Compares the behavior and failure modes between Geopolymer Concrete (GPC) structures and Ordinary Portland Concrete (OPC) structures - Explains important concepts such as bond, confinement, fracture of stirrups and buckling of FRP bars - Includes an in-depth analysis of ultimate strength of GPC and OPC, considering governing failure modes - Presents design examples following international standards, including North America ACI 440.1R-15, Canadian CAN/CSA S806, and Australian such as AS 3600

EASEC16

EASEC16
Author: Chien Ming Wang
Publisher: Springer Nature
Total Pages: 2093
Release: 2020-12-22
Genre: Technology & Engineering
ISBN: 9811580790

This book presents articles from The 16th East Asian-Pacific Conference on Structural Engineering and Construction, 2019, held in Brisbane, Australia. It provides a forum for professional engineers, academics, researchers and contractors to present recent research and developments in structural engineering and construction.​

Manual of Ready-Mixed Concrete

Manual of Ready-Mixed Concrete
Author: R Anderson
Publisher: CRC Press
Total Pages: 256
Release: 1992-09-03
Genre: Architecture
ISBN: 1135697647

The new edition of this successful manual has been carefully revised throughout to take account of recent changes and to incorporate amendments required due to the publication of the revised BS 5328. This manual provides information on all aspects of the ready-mixed concrete industry, from the basic materials and their properties to the production,

Alkali-Aggregate Reaction in Concrete

Alkali-Aggregate Reaction in Concrete
Author: Ian Sims
Publisher: CRC Press
Total Pages: 768
Release: 2017-08-01
Genre: Science
ISBN: 1317484428

Alkali-Aggregate Reaction in Concrete: A World Review is unique in providing authoritative and up to date expert information on the causes and effects of Alkali-Aggregate Reaction (AAR) in concrete structures worldwide. In 1992 a first edition entitled The Alkali-Silica Reaction in Concrete, edited by Professor Narayan Swamy, was published in a first attempt to cover this concrete problem from a global perspective, but the coverage was incomplete. This completely new edition offers a fully updated and more universal coverage of the world situation concerning AAR and includes a wealth of new evidence and research information that has accumulated in the intervening years. Although there are various textbooks offering readers sections that deal with AAR deterioration and damage to concrete, no other single book brings together the views of recognised international experts in the field, and the wealth of scattered research information that is available. It provides a ‘state of the art’ review and deals authoritatively with the mechanisms of AAR, its diagnosis and how to treat concrete affected by AAR. It is illustrated by numerous actual examples from around the world, and comprises specialist contributions provided by senior engineers and scientists from many parts of the world. The book is divided into two distinct but complementary parts. The first five chapters deal with the most recent findings concerning the mechanisms involved in the reaction, methods concerning its diagnosis, testing and evaluation, together with an appraisal of current methods used in its avoidance and in the remediation of affected concrete structures. The second part is divided into eleven chapters covering each region of the world in turn. These chapters have been written by experts with specialist knowledge of AAR in the countries involved and include an authoritative appraisal of the problem and its solution as it affects concrete structures in the region. Such an authoritative compilation of information on AAR has not been attempted previously on this scale and this work is therefore an essential source for practising and research civil engineers, consultant engineers and materials scientists, as well as aggregate and cement producers, designers and concrete suppliers, especially regarding projects outside their own region.