Simulation, Modeling, and Programming for Autonomous Robots

Simulation, Modeling, and Programming for Autonomous Robots
Author: Itsuki Noda
Publisher: Springer
Total Pages: 425
Release: 2012-10-20
Genre: Computers
ISBN: 3642343279

This book constitutes the refereed proceedings of the Third International Conference on Simulation, Modeling, and Programming for Autonomous Robots, SIMPAR 2012, held in Tsukuba, Japan, in November 2012. The 33 revised full papers and presented together with 3 invited talks were carefully reviewed and selected from 46 submissions. Ten papers describe design of complex behaviors of autonomous robots, 9 address software layers, 8 papers refer to related modeling and learning. The papers are organized in topical sections on mobile robots, software modeling and architecture and humanoid and biped robots.

Robotic Simulation

Robotic Simulation
Author: Daniel L. Ryan
Publisher: CRC Press
Total Pages: 336
Release: 1993-11-24
Genre: Technology & Engineering
ISBN: 9780849344688

Computer simulation of high-cost applications, especially those involving massive amounts of robotic equipment, is much more efficient than traditional laboratory means. This new textbook presents procedures that make an important contribution to the effective use of automated manufacturing. It also uses a unique combination of computer and robot skills to achieve solutions to the problems discussed throughout the text. Methods of utilizing existing simulation software are emphasized since this enables students to create workable robot designs through a better understanding of basic simulation techniques. Robotic Simulation is designed for introductory courses in simulation. For short courses or seminars, the chapters dealing with hardware-dependent applications can easily be omitted without interfering with the continuity of the text. The book's computerized simulation approach to robotics is an indispensable supplement to the normal methods taught in a course on robots.

Simulation, Modeling, and Programming for Autonomous Robots

Simulation, Modeling, and Programming for Autonomous Robots
Author: Davide Brugali
Publisher: Springer
Total Pages: 606
Release: 2014-09-19
Genre: Computers
ISBN: 3319119001

This book constitutes the refereed proceedings of the 4th International Conference on Simulation, Modeling, and Programming for Autonomous Robots, SIMPAR 2014, held in Bergamo, Italy, in October 2014. The 49 revised full papers presented were carefully reviewed and selected from 62 submissions. The papers are organized in topical sections on simulation, modeling, programming, architectures, methods and tools, and systems and applications.

Simulation, Modeling, and Programming for Autonomous Robots

Simulation, Modeling, and Programming for Autonomous Robots
Author: Noriako Ando
Publisher: Springer
Total Pages: 572
Release: 2010-11-11
Genre: Computers
ISBN: 3642173195

Why are the many highly capable autonomous robots that have been promised for novel applications driven by society, industry, and research not available - day despite the tremendous progress in robotics science and systems achieved during the last decades? Unfortunately, steady improvements in speci?c robot abilities and robot hardware have not been matched by corresponding robot performance in real world environments. This is mainly due to the lack of - vancements in robot software that master the development of robotic systems of ever increasing complexity. In addition, fundamental open problems are still awaiting sound answers while the development of new robotics applications s- fersfromthelackofwidelyusedtools,libraries,andalgorithmsthataredesigned in a modular and performant manner with standardized interfaces. Simulation environments are playing a major role not only in reducing development time and cost, e. g. , by systematic software- or hardware-in-the-loop testing of robot performance, but also in exploring new types of robots and applications. H- ever,their use may still be regardedwith skepticism. Seamless migrationof code using robot simulators to real-world systems is still a rare circumstance, due to the complexity of robot, world, sensor, and actuator modeling. These challenges drive the quest for the next generation of methodologies and tools for robot development. The objective of the International Conference on Simulation, Modeling, and ProgrammingforAutonomous Robots (SIMPAR) is to o?er a unique forum for these topics and to bring together researchersfrom academia and industry to identify and solve the key issues necessary to ease the development of increasingly complex robot software.

Simulation, Modeling, and Programming for Autonomous Robots

Simulation, Modeling, and Programming for Autonomous Robots
Author: Stefano Carpin
Publisher: Springer
Total Pages: 364
Release: 2008-11-09
Genre: Computers
ISBN: 3540890769

This book constitutes the refereed proceedings of the First International Conference on Simulation, Modeling, and Programming for Autonomous Robots, SIMPAR 2008, held in Venice, Italy, in November 2008. The 29 revised full papers and 21 revised poster papers presented were carefully reviewed and selected from 42 submissions. The papers address all current issues of robotics applications and simulation environments thereof, such as 3D robot simulation, reliability, scalability and validation of robot simulation, simulated sensors and actuators, offline simulation of robot design, online simulation with real­time constraints, simulation with software/hardware-in-the-loop, middleware for robotics, modeling framework for robots and environments, testing and validation of robot control software, standardization for robotic services, communication infrastructures in distributed robotics, interaction between sensor networks and robots, human robot interaction, and multi­robot. The papers are organized in topical sections on simulation, programming, and applications.

Robotics, Vision and Control

Robotics, Vision and Control
Author: Peter Corke
Publisher: Springer
Total Pages: 572
Release: 2011-09-05
Genre: Technology & Engineering
ISBN: 364220144X

The author has maintained two open-source MATLAB Toolboxes for more than 10 years: one for robotics and one for vision. The key strength of the Toolboxes provide a set of tools that allow the user to work with real problems, not trivial examples. For the student the book makes the algorithms accessible, the Toolbox code can be read to gain understanding, and the examples illustrate how it can be used —instant gratification in just a couple of lines of MATLAB code. The code can also be the starting point for new work, for researchers or students, by writing programs based on Toolbox functions, or modifying the Toolbox code itself. The purpose of this book is to expand on the tutorial material provided with the toolboxes, add many more examples, and to weave this into a narrative that covers robotics and computer vision separately and together. The author shows how complex problems can be decomposed and solved using just a few simple lines of code, and hopefully to inspire up and coming researchers. The topics covered are guided by the real problems observed over many years as a practitioner of both robotics and computer vision. It is written in a light but informative style, it is easy to read and absorb, and includes a lot of Matlab examples and figures. The book is a real walk through the fundamentals of robot kinematics, dynamics and joint level control, then camera models, image processing, feature extraction and epipolar geometry, and bring it all together in a visual servo system. Additional material is provided at http://www.petercorke.com/RVC

Comprehensive Healthcare Simulation: Surgery and Surgical Subspecialties

Comprehensive Healthcare Simulation: Surgery and Surgical Subspecialties
Author: Dimitrios Stefanidis
Publisher: Springer
Total Pages: 391
Release: 2019-01-05
Genre: Medical
ISBN: 3319982761

This pragmatic book is a guide for the use of simulation in surgery and surgical subspecialties, including general surgery, urology, gynecology, cardiothoracic and vascular surgery, orthopedics, ophthalmology, and otolaryngology. It offers evidence-based recommendations for the application of simulation in surgery and addresses procedural skills training, clinical decision-making and team training, and discusses the future of surgical simulation. Readers are introduced to the different simulation modalities and technologies used in surgery with a variety of learners including students, residents, practicing surgeons, and other health-related professionals.

Practical Simulation in Urology

Practical Simulation in Urology
Author: Chandra Shekhar Biyani
Publisher: Springer Nature
Total Pages: 513
Release: 2022-05-05
Genre: Medical
ISBN: 3030887898

This book provides a detailed overview of a range of simulation models that have been developed which are applicable to urology. Chapters feature critical analysis of techniques including synthetic bench top models, computer-assisted virtual reality and box simulators. Furthermore, details of best practice, the latest innovations and guidance on how to select potential low-cost options is provided, enabling the reader to systematically develop a thorough understanding of the subject. Practical Simulation in Urology is a comprehensive resource that critically analyses the latest simulation techniques that are applicable in urology, making it an ideal resource for the practicing and trainee urologist seeking an up-to-date overview on the subject.

Modelling and Simulation for Autonomous Systems

Modelling and Simulation for Autonomous Systems
Author: Jan Hodicky
Publisher: Springer
Total Pages: 401
Release: 2015-08-20
Genre: Computers
ISBN: 3319138235

This book constitutes the thoroughly refereed post-workshop proceedings of the First International Workshop on Modelling and Simulation for Autonomous Systems, MESAS 2014, held in Rome, Italy, in May 2014. The 32 revised full papers included in the volume were carefully reviewed and selected from 50 submissions, of which 46 were presented at the workshop. They are organized in the following topical sections: unmanned aerial vehicle, distributed simulation, robot system, military application, validation, human-machine communication, gazebo simulator, and algorithm.

The Comprehensive Textbook of Healthcare Simulation

The Comprehensive Textbook of Healthcare Simulation
Author: Adam I. Levine
Publisher: Springer Science & Business Media
Total Pages: 718
Release: 2013-06-18
Genre: Medical
ISBN: 1461459931

The Comprehensive Textbook of Healthcare Simulation is a cohesive, single-source reference on all aspects of simulation in medical education and evaluation. It covers the use of simulation in training in each specialty and is aimed at healthcare educators and administrators who are developing their own simulation centers or programs and professional organizations looking to incorporate the technology into their credentialing process. For those already involved in simulation, the book will serve as a state-of-the-art reference that helps them increase their knowledge base, expand their simulation program’s capabilities, and attract new, additional target learners. Features: • Written and edited by pioneers and experts in healthcare simulation • Personal memoirs from simulation pioneers • Each medical specialty covered • Guidance on teaching in the simulated environment • Up-to-date information on current techniques and technologies • Tips from “insiders” on funding, development, accreditation, and marketing of simulation centers • Floor plans of simulation centers from across the United States • Comprehensive glossary of terminology