Residual Stress Micro And Macrotexture In Surface Enhanced Titanium Alloys Their Nondestructive Inspection And Effects On High Cycle Fatigue Properties
Download Residual Stress Micro And Macrotexture In Surface Enhanced Titanium Alloys Their Nondestructive Inspection And Effects On High Cycle Fatigue Properties full books in PDF, epub, and Kindle. Read online free Residual Stress Micro And Macrotexture In Surface Enhanced Titanium Alloys Their Nondestructive Inspection And Effects On High Cycle Fatigue Properties ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Author | : Olaf Engler |
Publisher | : CRC Press |
Total Pages | : 490 |
Release | : 2009-11-16 |
Genre | : Science |
ISBN | : 1420063669 |
The first edition of Introduction to Texture Analysis: Macrotexture, Microtexture, and Orientation Mapping broke new ground by collating seventy years worth of research in a convenient single-source format. Reflecting emerging methods and the evolution of the field, the second edition continues to provide comprehensive coverage of the concepts, pra
Author | : ASM International |
Publisher | : ASM International |
Total Pages | : 412 |
Release | : 1994-12-31 |
Genre | : Technology & Engineering |
ISBN | : 9781615031658 |
Author | : Satyam Suwas |
Publisher | : Springer |
Total Pages | : 0 |
Release | : 2014-08-26 |
Genre | : Technology & Engineering |
ISBN | : 9781447163138 |
Providing a comprehensive and invaluable overview of the basics of crystallographic textures and their industrial applications, this book covers a broad range of both structural and functional materials. It introduces the existing methods of representation in an accessible manner and presents a thorough overview of existing knowledge on texture of metallic materials. Texture analysis has widespread use in many industries, and provides crucial input towards the development of new materials and products. There has been rapid growth in the science and art of texture analysis in the last few decades. Other topics addressed within this book include recent research on texture in thin films and non-metals, and the dependence of material properties on texture, and texture control in some engineering materials. This book constitutes an invaluable reference text for researchers and professionals working on texture analysis in metallurgy, materials science and engineering, physics and geology. By using content selectively, it is also highly accessible to undergraduate students.
Author | : C.B Scruby |
Publisher | : CRC Press |
Total Pages | : 470 |
Release | : 1990-01-01 |
Genre | : Technology & Engineering |
ISBN | : 9780750300506 |
The first book devoted to laser techniques in the generation and reception of ultrasonic waves in materials, Laser Ultrasonics: Techniques and Applications provides a full description of the state of the art in all fields involving both lasers and ultrasonics. This practical book focuses mainly on the possible applications of the techniques, yet theory is discussed wherever necessary. After an introduction to ultrasonics and laser technology, the book reviews acousto-optics, various acousto-optic devices, and noninterferometric optical methods of measuring ultrasonic displacements. The authors then describe opto-acoustic techniques, discussing laser interferometry, including reference-beam, velocity, and Fabry-Perot systems, and their application to ultrasonic measurement on different surfaces. The authors also detail the generation of ultrasound as a consequence of the absorption of laser light in material. The book proceeds to discuss applications of laser-generated ultrasound, both by itself and in combination with laser interferometric reception to form an entirely remote and non-contact measurement and testing system. Comparisons with nonoptical techniques for ultrasonic generation and detection are made where appropriate. The book concludes with a discussion of the future developments and uses of laser techniques in ultrasonics, with particular reference to nondestructive testing.
Author | : Gerd Lütjering |
Publisher | : Springer Science & Business Media |
Total Pages | : 385 |
Release | : 2013-06-29 |
Genre | : Technology & Engineering |
ISBN | : 3540713980 |
The authors were motivated to prepare this book by the absence of any recent comprehensive book on titanium. The intent of this book is to provide a modern compendium that addresses both the phyical metallurgy as well as the applications of titanium. Until now the only book on this subject is that by Zwicker which was written in German and published almost 30 years ago. Chapter 1 is an introduction to the subject including some historical aspects of titanium. Chapter 2 is a s- mary of the Fundamental Aspects of Titanium, Chapter 3 is a summary of the Technological Aspects of Titanium and Chapters 4 through 9 address the specifics of the various classes of titanium ranging from CP Titanium to Titanium Matrix Composites. Finally, Chapter 10 covers “special” properties and applications of titanium. Our intent has been to address the subject conceptually rather than provide quantities of data of the sort that would be found in a Handbook. It is our intent that this book is useful for materials scientists and engineers interested in using titanium and for students either as a sourcebook or as a textbook. We have - tempted to include a representative set of references which provide additional detail for readers interested in specific aspects of titanium. Because of the re- tively recent growth of the technological importance of titanium, there is a vo- minous literature on titanium. While our references span this literature it has proven impossible to mention every contribution.
Author | : Donald O. Thompson |
Publisher | : Springer Science & Business Media |
Total Pages | : 2093 |
Release | : 2012-12-06 |
Genre | : Technology & Engineering |
ISBN | : 1461553393 |
These Proceedings, consisting of Parts A and B, contain the edited versions of most of the papers presented at the annual Review of Progress in Quantitative Nondestructive Evaluation held at University of San Diego, San Diego, CA, on July 27 to August 1, 1997. The Review was organized by the Center for NDE at Iowa State University, in cooperation with the Ames Laboratory of the USDOE, the American Society of Nondestructive Testing, the National Institute of Standards and Technology, the Federal Aviation Administration, and the National Science Foundation IndustrylUniversity Cooperative Research Centers. This year's Review of Progress in QNDE was attended by approximately 370 participants from the US and many foreign countries who presented a total of approximately 350 papers. As usual, the meeting was divided into 36 sessions with four sessions running concurrently. The Review covered all phases of NDE research and development from fundamental investigations to engineering applications and inspection systems, and methods of inspection science from acoustics to x-rays. The Review continues to experience some fluctuations in size, mostly under pressure from a decrease in funding for NDE research at the US Federal level, but increased participation from foreign laboratories has more than made up the difference. The Review is ideally sized to permit a full-scale overview of the latest developments in a collegial atmosphere that most participants favor. The opening plenary session this year concentrated on advances in imaging technologies and methodologies that have been made in recent years. Dr. K.
Author | : The Minerals, Metals & Materials Society TMS |
Publisher | : Springer |
Total Pages | : 777 |
Release | : 2017-02-18 |
Genre | : Technology & Engineering |
ISBN | : 3319514938 |
This collection features papers presented at the 146th Annual Meeting & Exhibition of The Minerals, Metals & Materials Society.
Author | : M.R. Oliver |
Publisher | : Springer Science & Business Media |
Total Pages | : 444 |
Release | : 2004-01-26 |
Genre | : Technology & Engineering |
ISBN | : 9783540431817 |
This book contains a comprehensive review of CMP (Chemical-Mechanical Planarization) technology, one of the most exciting areas in the field of semiconductor technology. It contains detailed discussions of all aspects of the technology, for both dielectrics and metals. The state of polishing models and their relation to experimental results are covered. Polishing tools and consumables are also covered. The leading edge issues of damascene and new dielectrics as well as slurryless technology are discussed.
Author | : J. Y. Wong |
Publisher | : John Wiley & Sons |
Total Pages | : 586 |
Release | : 2001-03-20 |
Genre | : Technology & Engineering |
ISBN | : 9780471354611 |
An updated edition of the classic reference on the dynamics of road and off-road vehicles As we enter a new millennium, the vehicle industry faces greater challenges than ever before as it strives to meet the increasing demand for safer, environmentally friendlier, more energy efficient, and lower emissions products. Theory of Ground Vehicles, Third Edition gives aspiring and practicing engineers a fundamental understanding of the critical factors affecting the performance, handling, and ride essential to the development and design of ground vehicles that meet these requirements. As in previous editions, this book focuses on applying engineering principles to the analysis of vehicle behavior. A large number of practical examples and problems are included throughout to help readers bridge the gap between theory and practice. Covering a wide range of topics concerning the dynamics of road and off-road vehicles, this Third Edition is filled with up-to-date information, including: * The Magic Formula for characterizing pneumatic tire behavior from test data for vehicle handling simulations * Computer-aided methods for performance and design evaluation of off-road vehicles, based on the author's own research * Updated data on road vehicle transmissions and operating fuel economy * Fundamentals of road vehicle stability control * Optimization of the performance of four-wheel-drive off-road vehicles and experimental substantiation, based on the author's own investigations * A new theory on skid-steering of tracked vehicles, developed by the author.
Author | : Benjamin W. Roberts |
Publisher | : Springer Science & Business Media |
Total Pages | : 866 |
Release | : 2014-01-07 |
Genre | : Social Science |
ISBN | : 1461490170 |
The study of ancient metals in their social and cultural contexts has been a topic of considerable interest in archaeology and ancient history for decades, partly due to the modern dependence on technology and man-made materials. The formal study of Archaeometallurgy began in the 1970s-1980s, and has seen a recent growth in techniques, data, and theoretical movements. This comprehensive sourcebook on Archaeometallurgy provides an overview of earlier research as well as a review of modern techniques, written in an approachable way. Covering an extensive range of archaeological time-periods and regions, this volume will be a valuable resource for those studying archaeology worldwide. It provides a clear, straightforward look at the available methodologies, including: • Smelting processes • Slag analysis • Technical Ceramics • Archaeology of Mining and Field Survey • Ethnoarchaeology • Chemical Analysis and Provenance Studies • Conservation Studies With chapters focused on most geographic regions of Archaeometallurgical inquiry, researchers will find practical applications for metallurgical techniques in any area of their study. Ben Roberts is a specialist in the early metallurgy and later prehistoric archaeology of Europe. He was the Curator of the European Copper and Bronze Age collections at the British Museum between 2007 and 2012 and is now a Lecturer in Prehistoric Europe in the Departm ent of Archaeology at the Durham University, UK. Chris Thornton is a specialist in the ancient metallurgy of the Middle East, combining anthropological theory with archaeometrical analysis to understand the development and diffusion of metallurgical technologies throughout Eurasia. He is currently a Consulting Scholar of the University of Pennsylvania Museum, where he received his PhD in 2009, and the Lead Program Officer of research grants at the National Geographic Society.