Guide to Application of Real-time Radiography to Weld Inspection

Guide to Application of Real-time Radiography to Weld Inspection
Author: British Standards Institute Staff
Publisher:
Total Pages: 12
Release: 1988-09-01
Genre:
ISBN: 9780580167621

Radiographic testing, Radiography, Non-destructive testing, Welded joints, X-rays, Gamma-radiation, Inspection equipment, Inspection, Image intensifiers, Quality, Real-time systems, Computer applications, Performance, Test equipment, Image distortion, Resolution, Sensitivity, Noise (spurious signals), Digital signals

Real-Time Radiography for CDI Castings X-ray Inspection System, SBIR Phase I.

Real-Time Radiography for CDI Castings X-ray Inspection System, SBIR Phase I.
Author: Nand Gupta
Publisher:
Total Pages: 29
Release: 1997
Genre:
ISBN:

The purpose of this project is to demonstrate the feasibility of a low cost, real-tirne radiographic inspection technique for Cast Ductile from (CDI) castings which can provide both standard inspection images and three dimensional positional information of image features. The feasibility of this project was demonstrated by real time radiographic experiments on a smaller object at 150 kV x-ray energy and by tangential x-ray imaging of an actual 3% CDI projectile at 280 kV x-ray energy. The greater sensitivity of the new detector technology introduced in this development project makes it possible to use significantly lower x-ray energy than would normally be required for the inspection of such castings. This is an important achievement because the cost of radiographic inspection equipment and facilities is directly correlated with the x-ray energy level. For data display, a new tangential technique for the collection of radiographic data is combined with a Multi Planer Reconstruction (MPR) image display (first introduced in a recent Omega NSWC SBlR). This is used to show both the standard and three-dimensional inspection information. This combination of enhanced detectors, tangential scanmng and data display makes possible an enhanced, cost effective, radiographic inspection system which can identify both the features and their position in three-dimensional space in the dense CDI material.

Real-time X-ray Inspection System for Fast Flux Test Facility Fuel

Real-time X-ray Inspection System for Fast Flux Test Facility Fuel
Author: C. N JACKSON (JR.)
Publisher:
Total Pages: 6
Release: 1973
Genre:
ISBN:

A REAL-TIME INSPECTION SYSTEM HAS BEEN DEVELOPED AT HANFORD ENGINEERING DEVELOPMENT LABORATORY FOR RAPID AND THOROUGH X-RAY INSPECTION OF FAST FLUX TEST FACILITY FUEL (FFTF) FUEL PINS. THIS SYSTEM CONSISTS OF AN X-RAY GENERATING UNIT AND AN X-RAY SENSITIVE VIDICON CAMERA CLOSED-CIRCUIT VIDEO SYSTEM CONTAINED WITHIN A SHIELDED TEST CHAMBER THAT IS FULLY DESCRIBED. A SPECIAL X-RAY TELEVISION CAMERA EMPLOYING A SENSITIVE PBO SIGNAL PLATE IS USED IN PLACE OF CONVENTIONAL FILM RADIOGRAPHY. THE X-RAY UNIT A NEW CONSTANT POTENTIAL 260KV X-RAY TUBE WITH BOTH A BERYLLIUM WINDOW AND A 0.5 MM2 FOCAL SPOT SIZE FOR OBTAINING AN INTENSE, HIGH RESOLUTION X-RAY BEAM. THE 14-IN. (35.56 CM) CLOSED-CIRCUIT TV MONITOR WITH A MAGNIFICATION FACTOR OF 24X FACILITATES OPERATOR VIEWING AT SCAN RATES UP TO 12 IN. (30.4 CM)/MINUTE. PRECISE DIMENSIONAL MEASUREMENTS OF FUEL PIN LENGTH AND PELLET-TO-PELLET INTERSPACE CAN BE OBTAINED WITH AN ACCURACY OF PLUS OR MINUS 0.001 IN. (0.025 MM). (MODIFIED).

Radiation Source Use and Replacement

Radiation Source Use and Replacement
Author: National Research Council
Publisher: National Academies Press
Total Pages: 232
Release: 2008-05-25
Genre: Medical
ISBN: 0309110149

In the United States there are several thousand devices containing high-activity radiation sources licensed for use in areas ranging from medical uses such as cancer therapy to safety uses such as testing of structures and industrial equipment. Those radiation sources are licensed by the U.S. Nuclear Regulatory Commission and state agencies. Concerns have been raised about the safety and security of the radiation sources, particularly amid fears that they could be used to create dirty bombs, or radiological dispersal device (RDD). In response to a request from Congress, the U.S. Nuclear Regulatory Commission asked the National Research Council to conduct a study to review the uses of high-risk radiation sources and the feasibility of replacing them with lower risk alternatives. The study concludes that the U.S. government should consider factors such as potential economic consequences of misuse of the radiation sources into its assessments of risk. Although the committee found that replacements of most sources are possible, it is not economically feasible in some cases. The committee recommends that the U.S. government take steps to in the near term to replace radioactive cesium chloride radiation sources, a potential "dirty bomb" ingredient used in some medical and research equipment, with lower-risk alternatives. The committee further recommends that longer term efforts be undertaken to replace other sources. The book presents a number of options for making those replacements.

Radiographic Testing at Lawrence Livermore National Laboratory

Radiographic Testing at Lawrence Livermore National Laboratory
Author:
Publisher:
Total Pages:
Release: 1982
Genre:
ISBN:

Radiographic testing is a nondestructive inspection technique which uses penetrating radiation. The Nondestructive Evaluation (NDE) Section at Lawrence Livermore National Laboratory has a broad spectrum of equipment and techniques for radiographic testing. These resources include low-energy vacuum systems, low- and mid-energy cabinet and cell radiographic systems, high-energy linear accelerators, portable x-ray machines and radioisotopes for radiographic inspections. For diagnostic testing the NDE Section also has real-time and flash radiographic equipment.