Configuration Management Metrics

Configuration Management Metrics
Author: Frank B. Watts
Publisher: William Andrew
Total Pages: 279
Release: 2009-08-26
Genre: Business & Economics
ISBN: 1437778348

Configuration Management Metrics: Product Lifecycle and Engineering Documentation Control Process Measurement and Improvement provides a comprehensive discussion of measurements for configuration management/product lifecycle processes. Each chapter outlines one of the most important measures of merit – the need for written policy and procedures. The best of the best practices as to the optimum standards are listed with an opportunity for the reader to check off those that their company has and those they do not. The book first defines the concept of configuration management (CM) and explains its importance. It then discusses the important metrics in the major CM and related processes. These include: new item release; order entry/fulfillment; request for change; bill of material change cost; and field change. Ancillary processes which may or may not be thought of as part of these major processes are also addressed, including deviations, service parts, publications and field failure reporting. Provides detailed guidance on developing and implementing measurement systems and reports Demonstrates methods of graphing and charting data, with benchmarks A practical resource for the development of Engineering Documentation Control processes Includes basic principles of Product Lifecycle processes and their measurement

Implementing Metrics for IT Service Management

Implementing Metrics for IT Service Management
Author: David Smith
Publisher: Van Haren
Total Pages: 201
Release: 2008-08-08
Genre: Architecture
ISBN: 9401801207

This book 'Implementing Metrics for IT Service Management' provides a measurement framework which is based on a continuous improvement lifecycle. The measurement framework is aligned with the IT Infrastructure Library (ITIL®) set of best practices. The framework is compatible with the Control Objectives for IT (CobiT®) framework and supports ISO/IEC 20000 standards for IT Service Management. This book also provides the basic concepts around measurements for business/IT alignment, achieving compliance and driving operation excellence. Where possible, examples, case studies and check lists have been included along with a scorecard accelerator software tool to further improve the learning experience and accelerate the adoption of measurements. The goal of this book is to provide the reader with a measurement framework to align IT with the business objectives to create value through continuous improvements. This book is complimentary to the book 'Metrics for IT Service Management' also published by Van Haren Publishing.

Metrics for Service Management:

Metrics for Service Management:
Author: Jan Schilt
Publisher: Van Haren
Total Pages: 181
Release: 2020-06-10
Genre: Architecture
ISBN: 9087536496

This title is the sister book to the global best-seller Metrics for IT Service Management. Taking the basics steps described there, this new title describes the context within the ITIL 2011 Lifecycle approach. More than that it looks at the overall goal of metrics which is to achieve Value. The overall delivery of Business Value is driven by Corporate Strategy and Governance, from which Requirements are developed and Risks identified. These Requirements drive the design of Services, Processes and Metrics. Metrics are designed and metrics enable design as well as governing the delivery of value through the whole lifecycle. The book shows the reader how do achieve this Value objective by extending the ITIL Service Lifecycle approach to meet business requirements.

Software Management Approaches: Project Management, Estimation, and Life Cycle Support

Software Management Approaches: Project Management, Estimation, and Life Cycle Support
Author: Michael Haug
Publisher: Springer Science & Business Media
Total Pages: 191
Release: 2011-06-28
Genre: Computers
ISBN: 3642566162

C. Amting Directorate General Information Society, European Commission, Brussels th Under the 4 Framework of European Research, the European Systems and Soft ware Initiative (ESSI) was part of the ESPRIT Programme. This initiative funded more than 470 projects in the area of software and system process improvements. The majority of these projects were process improvement experiments carrying out and taking up new development processes, methods and technology within the software development process of a company. In addition, nodes (centres ofexper tise), European networks (organisations managing local activities), training and dissemination actions complemented the process improvement experiments. ESSI aimed at improving the software development capabilities of European enterprises. It focused on best practice and helped European companies to develop world class skills and associated technologies to build the increasingly complex and varied systems needed to compete in the marketplace. The dissemination activities were designed to build a forum, at European level, to exchange information and knowledge gained within process improvement ex periments. Their major objective was to spread the message and the results of experiments to a wider audience, through a variety ofdifferent channels. The European Experience Exchange (I;UR~X) project has been one ofthese dis semination activities within the European Systems and Software Initiative.~UR~X has collected the results of practitioner reports from numerous workshops in Europe and presents, in this series of books, the results of Best Practice achieve ments in European Companies over the last few years.

Software Process Improvement: Metrics, Measurement, and Process Modelling

Software Process Improvement: Metrics, Measurement, and Process Modelling
Author: Michael Haug
Publisher: Springer Science & Business Media
Total Pages: 399
Release: 2011-06-28
Genre: Computers
ISBN: 3642566189

C. Amting Directorate General Information Society, European Commission, Brussels Under the 4th Framework of European Research, the European Systems and Soft ware Initiative (ESSI) was part of the ESPRIT Programme. This initiative funded more than 470 projects in the area' of software and system process improvements. The majority of these projects were process improvement experiments carrying out and taking up new development processes, methods and technology within the software development process of a company. In addition, nodes (centres of exper tise), European networks (organisations managing local activities), training and dissemination actions complemented the process improvement experiments. ESSI aimed at improving the software development capabilities of European enterprises. It focused on best practice and helped European companies to develop world class skills and associated technologies to build the increasingly complex and varied systems needed to compete in the marketplace. The dissemination activities were designed to build a forum, at European level, to exchange information and knowledge gained within process improvement ex periments. Their major objective was to spread the message and the results of experiments to a wider audience, through a variety of different channels. The European Experience Exchange ~UR~X) project has been one of these dis semination activities within the European Systems and Software Initiative.~UR~X has collected the results of practitioner reports from numerous workshops in Europe and presents, in this series of books, the results of Best Practice achieve ments in European Companies over the last few years.

A Software Process Model Handbook for Incorporating People's Capabilities

A Software Process Model Handbook for Incorporating People's Capabilities
Author: Silvia T. Acuna
Publisher: Springer Science & Business Media
Total Pages: 333
Release: 2006-06-03
Genre: Computers
ISBN: 0387254897

A Software Process Model Handbook for Incorporating People's Capabilities offers the most advanced approach to date, empirically validated at software development organizations. This handbook adds a valuable contribution to the much-needed literature on people-related aspects in software engineering. The primary focus is on the particular challenge of extending software process definitions to more explicitly address people-related considerations. The capability concept is not present nor has it been considered in most software process models. The authors have developed a capabilities-oriented software process model, which has been formalized in UML and implemented as a tool. A Software Process Model Handbook for Incorporating People's Capabilities guides readers through the incorporation of the individual’s capabilities into the software process. Structured to meet the needs of research scientists and graduate-level students in computer science and engineering, this book is also suitable for practitioners in industry.

Process Improvement with CMMI v1.2 and ISO Standards

Process Improvement with CMMI v1.2 and ISO Standards
Author: Boris Mutafelija
Publisher: CRC Press
Total Pages: 273
Release: 2008-10-30
Genre: Business & Economics
ISBN: 1000687465

In this age of globalization, process improvement practitioners must be able to comprehend and work with the different standards and frameworks used around the world. While many systems and software engineering organizations rely on a single standard as the primary driver of process improvement efforts (CMMI-based process improvement in the U.S. an

Configuration Management Best Practice Handbook

Configuration Management Best Practice Handbook
Author: Gerard Blokdijk
Publisher: Emereo Pty Limited
Total Pages: 140
Release: 2008-10
Genre: Computers
ISBN: 9781921523779

Covers every detail, including some missed in other books. This thorough book provides a clear roadmap to designing, implementing and operating Configuration Management. The author leaves no key process out and completely covers everything from initial concept to measuring effectiveness and process improvement. The book starts with an initial strategy that is focused on planning Configuration Management services that are completely aligned to requirements and are based on a mission statement. This business-oriented approach is refreshing and will keep IT grounded in the real reasons for a Configuration Management. More importantly is the process for careful selection of services to provide. An overly ambitious set of service goals will kill a Configuration Management implementation early in its life by offering too much before there is a stable Configuration Management process in place. This book is realistic and lays the foundation for a successful implementation. The section on the actual design of the Configuration Management structure provides insights and information that can be applied to a large number of solutions. Since Configuration Management will be organized in accordance with requirements and unique mission statements, this section of the book is like a catalog of patterns. It has excellent tips on how to best structure Configuration Management to meet requirements and mission. The information on accurately estimating requirements is consistent with industry best practices and something that, believe it or not, is often overlooked when Configuration Management is established. This book gets into the meat by thoroughly covering the processes that are essentialto running Configuration Management. There are many topics that stand out as both unique [to books of this genre] and reflect best practices by the best-run Configuration Management Managers. Examples are change control, disaster recovery and vendor management. These topics show that the author not only considers business alignment, but also cross-functional alignment within IT. Professional resources and underlying technology are provided in detail. This book contains an in-depth coverage of operational requirements for Configuration Management once it has been implemented. It hits all of the critical success factors, such as performance metrics, service level agreements, communications and internal evaluations. It even has a chapter on marketing, which is something that is important but not often done by most Configuration Management Managers. This proactive approach to keeping users (your customers) informed of new services, accomplishments and tips is excellent and will go a long way towards attaining high customer satisfaction scores - not to mention proving the value of the Configuration Management to IT and business management. You will find this book to be one of the best for planning and implementing world-class Configuration Management.