Pressure and Heat Transfer Measurements for Hypersonic Flows Over Expansion Corners and Ahead of Ramps: Mach 8 pressure data for flows ahead of ramps

Pressure and Heat Transfer Measurements for Hypersonic Flows Over Expansion Corners and Ahead of Ramps: Mach 8 pressure data for flows ahead of ramps
Author: Louis G. Kaufman
Publisher:
Total Pages: 144
Release: 1964
Genre: Aerodynamic heating
ISBN:
GET BOOK

"Pressure and heat transfer data were obtained for hypersonic flows over 40-degree expansion corners and ahead of ramps. Full and partial span ramps, having wedge angles up to 90 degrees, were tested at two locations on a sharp leading edge flat plate, with and without end plates. Pressure data were obtained for [M sub infinity =] 5 for model length Reynolds numbers between 1.1 and 6.6 million. Both pressure and heat transfer data were obtained for [M sub infinity =] 8 for Reynolds numbers between 1.1 and 3.3 million." -- page iii, pt.4.

Pressure and Heat Transfer Measurements for Hypersonic Flows Over Expansion Corners and Ahead of Ramps: Mach 8 heat transfer data for flows ahead of ramps

Pressure and Heat Transfer Measurements for Hypersonic Flows Over Expansion Corners and Ahead of Ramps: Mach 8 heat transfer data for flows ahead of ramps
Author: Louis G. Kaufman
Publisher:
Total Pages: 172
Release: 1964
Genre: Aerodynamic heating
ISBN:
GET BOOK

"Pressure and heat transfer data were obtained for hypersonic flows over 40-degree expansion corners and ahead of ramps. Full and partial span ramps, having wedge angles up to 90 degrees, were tested at two locations on a sharp leading edge flat plate, with and without end plates. Pressure data were obtained for [M sub infinity =] 5 for model length Reynolds numbers between 1.1 and 6.6 million. Both pressure and heat transfer data were obtained for [M sub infinity =] 8 for Reynolds numbers between 1.1 and 3.3 million." -- page iii, pt.4.

Pressure and Heat Transfer Measurements for Hypersonic Flows Over Expansion Corners and Ahead of Ramps: Mach 5 and 8 data for expansion corner flows

Pressure and Heat Transfer Measurements for Hypersonic Flows Over Expansion Corners and Ahead of Ramps: Mach 5 and 8 data for expansion corner flows
Author: Louis G. Kaufman
Publisher:
Total Pages: 96
Release: 1963
Genre: Aerodynamic heating
ISBN:
GET BOOK

"Pressure and heat transfer data were obtained for hypersonic flows over 40-degree expansion corners and ahead of ramps. Full and partial span ramps, having wedge angles up to 90 degrees, were tested at two locations on a sharp leading edge flat plate, with and without end plates. Pressure data were obtained for [M sub infinity =] 5 for model length Reynolds numbers between 1.1 and 6.6 million. Both pressure and heat transfer data were obtained for [M sub infinity =] 8 for Reynolds numbers between 1.1 and 3.3 million." -- page iii, pt.4.

Pressure and Heat Transfer Measurements for Hypersonic Flows Over Expansion Corners and Ahead of Ramps: Mach 5 pressure data for flows ahead of ramps

Pressure and Heat Transfer Measurements for Hypersonic Flows Over Expansion Corners and Ahead of Ramps: Mach 5 pressure data for flows ahead of ramps
Author: Louis G. Kaufman
Publisher:
Total Pages: 238
Release: 1963
Genre: Aerodynamic heating
ISBN:
GET BOOK

"Pressure and heat transfer data were obtained for hypersonic flows over 40-degree expansion corners and ahead of ramps. Full and partial span ramps, having wedge angles up to 90 degrees, were tested at two locations on a sharp leading edge flat plate, with and without end plates. Pressure data were obtained for [M sub infinity =] 5 for model length Reynolds numbers between 1.1 and 6.6 million. Both pressure and heat transfer data were obtained for [M sub infinity =] 8 for Reynolds numbers between 1.1 and 3.3 million." -- page iii, pt.4.

Pressure Measurements for Mach 8 Flows Over Expansion Corners and Ramps on an Internally Cooled Model

Pressure Measurements for Mach 8 Flows Over Expansion Corners and Ramps on an Internally Cooled Model
Author: Louis G. Kaufman
Publisher:
Total Pages: 164
Release: 1964
Genre: Aerodynamic load
ISBN:
GET BOOK

The report presents data obtained on the upper, flat plate, surface of the model and on the face of a 25% chord, full span, ramp mounted on the trailing edge of the flat plate. Data were obtained for three ramp angles, both with and without internal cooling of the flat plate surface, for model angles of attack from -43 to +10 degrees for free stream Reynolds numbers per foot of 1.1, 2.2 and 3.3 million.