Giant Fields of the Decade 2000-2010

Giant Fields of the Decade 2000-2010
Author: Robert K. Merrill
Publisher:
Total Pages: 0
Release: 2017
Genre: Gas fields
ISBN: 9780891813934

"Oil and gas fields greater than 500 MMBO equivalent are called giants. They are the world's ultimate prize. Giants drive worldwide economies and human prosperity. Nearly 50 years ago, Michel T. Halbouty encouraged geoscientists to practice Discovery Thinking and study fields that matter most when he initiated the Giant Fields AAPG Memoir series. Previous Giant Fields Memoirs are: Memoir 14, Memoir 30, Memoir 54, and Memoir 78. It is exciting that giant fields are still being found today. The decade 2000-2010 was characterized by the rise of the unconventional plays. These are dominated by large regional accumulations in small microscopic pore throats. In addition to the unconventional accumulations, deep-water accumulations continue to have increasing importance in the global hydrocarbon budget. The editors of this latest Giant Fields volume, R. K. Merrill and C. A. Sternbach, believe that giant fields will continue to be found with renewed technology, new exploration and production concepts, enhanced imaging, and the boldness to explore in deeper water and more remote geography. AAPG Memoir 113 proudly continues the fifth decade of the Giant Fields series" -- Provided by publisher.

Drilling Engineering Problems and Solutions

Drilling Engineering Problems and Solutions
Author: M. E. Hossain
Publisher: John Wiley & Sons
Total Pages: 551
Release: 2018-06-19
Genre: Science
ISBN: 1118998642

Completely up to date and the most thorough and comprehensive reference work and learning tool available for drilling engineering, this groundbreaking volume is a must-have for anyone who works in drilling in the oil and gas sector. Petroleum and natural gas still remain the single biggest resource for energy on earth. Even as alternative and renewable sources are developed, petroleum and natural gas continue to be, by far, the most used and, if engineered properly, the most cost-effective and efficient, source of energy on the planet. Drilling engineering is one of the most important links in the energy chain, being, after all, the science of getting the resources out of the ground for processing. Without drilling engineering, there would be no gasoline, jet fuel, and the myriad of other "have to have" products that people use all over the world every day. Following up on their previous books, also available from Wiley-Scrivener, the authors, two of the most well-respected, prolific, and progressive drilling engineers in the industry, offer this groundbreaking volume. They cover the basic tenets of drilling engineering, the most common problems that the drilling engineer faces day to day, and cutting-edge new technology and processes through their unique lens. Written to reflect the new, changing world that we live in, this fascinating new volume offers a treasure of knowledge for the veteran engineer, new hire, or student. This book is an excellent resource for petroleum engineering students, reservoir engineers, supervisors & managers, researchers and environmental engineers for planning every aspect of rig operations in the most sustainable, environmentally responsible manner, using the most up-to-date technological advancements in equipment and processes.

The

The
Author: Jaun Garcia
Publisher:
Total Pages:
Release: 2015-03-30
Genre:
ISBN: 9780990904991

Pre-Order now! Learn never-before published solutions to common drilling problems and discover how to continually improve efficiency during drilling. The "Drillers Knowledge Book" covers all aspects of drilling, including well design and construction, hydraulic optimization, rock mechanics, drilling fluid processing and much more. Between them, the two distinguished authors have more than a century of drilling experience. Publication anticipated by the end first quarter 2015. IADC.

Handbook of Offshore Oil and Gas Operations

Handbook of Offshore Oil and Gas Operations
Author: James G. Speight
Publisher: Elsevier
Total Pages: 444
Release: 2014-10-22
Genre: Technology & Engineering
ISBN: 0080878199

Handbook of Offshore Oil and Gas Operations is an authoritative source providing extensive up-to-date coverage of the technology used in the exploration, drilling, production, and operations in an offshore setting. Offshore oil and gas activity is growing at an expansive rate and this must-have training guide covers the full spectrum including geology, types of platforms, exploration methods, production and enhanced recovery methods, pipelines, and envinronmental managment and impact, specifically worldwide advances in study, control, and prevention of the industry's impact on the marine environment and its living resources. In addition, this book provides a go-to glossary for quick reference. Handbook of Offshore Oil and Gas Operations empowers oil and gas engineers and managers to understand and capture on one of the fastest growing markets in the energy sector today. - Quickly become familiar with the oil and gas offshore industry, including deepwater operations - Understand the full spectrum of the business, including environmental impacts and future challenges - Gain knowledge and exposure on critical standards and real-world case studies

Global Economic History: A Very Short Introduction

Global Economic History: A Very Short Introduction
Author: Robert C. Allen
Publisher: OUP Oxford
Total Pages: 192
Release: 2011-09-15
Genre: Business & Economics
ISBN: 019162053X

Why are some countries rich and others poor? In 1500, the income differences were small, but they have grown dramatically since Columbus reached America. Since then, the interplay between geography, globalization, technological change, and economic policy has determined the wealth and poverty of nations. The industrial revolution was Britain's path breaking response to the challenge of globalization. Western Europe and North America joined Britain to form a club of rich nations by pursuing four polices-creating a national market by abolishing internal tariffs and investing in transportation, erecting an external tariff to protect their fledgling industries from British competition, banks to stabilize the currency and mobilize domestic savings for investment, and mass education to prepare people for industrial work. Together these countries pioneered new technologies that have made them ever richer. Before the Industrial Revolution, most of the world's manufacturing was done in Asia, but industries from Casablanca to Canton were destroyed by western competition in the nineteenth century, and Asia was transformed into 'underdeveloped countries' specializing in agriculture. The spread of economic development has been slow since modern technology was invented to fit the needs of rich countries and is ill adapted to the economic and geographical conditions of poor countries. A few countries - Japan, Soviet Russia, South Korea, Taiwan, and perhaps China - have, nonetheless, caught up with the West through creative responses to the technological challenge and with Big Push industrialization that has achieved rapid growth through investment coordination. Whether other countries can emulate the success of East Asia is a challenge for the future. ABOUT THE SERIES: The Very Short Introductions series from Oxford University Press contains hundreds of titles in almost every subject area. These pocket-sized books are the perfect way to get ahead in a new subject quickly. Our expert authors combine facts, analysis, perspective, new ideas, and enthusiasm to make interesting and challenging topics highly readable.

Introduction to Permanent Plug and Abandonment of Wells

Introduction to Permanent Plug and Abandonment of Wells
Author: Mahmoud Khalifeh
Publisher: Springer Nature
Total Pages: 285
Release: 2020-01-27
Genre: Technology & Engineering
ISBN: 3030399702

This open access book offers a timely guide to challenges and current practices to permanently plug and abandon hydrocarbon wells. With a focus on offshore North Sea, it analyzes the process of plug and abandonment of hydrocarbon wells through the establishment of permanent well barriers. It provides the reader with extensive knowledge on the type of barriers, their functioning and verification. It then discusses plug and abandonment methodologies, analyzing different types of permanent plugging materials. Last, it describes some tests for verifying the integrity and functionality of installed permanent barriers. The book offers a comprehensive reference guide to well plugging and abandonment (P&A) and well integrity testing. The book also presents new technologies that have been proposed to be used in plugging and abandoning of wells, which might be game-changing technologies, but they are still in laboratory or testing level. Given its scope, it addresses students and researchers in both academia and industry. It also provides information for engineers who work in petroleum industry and should be familiarized with P&A of hydrocarbon wells to reduce the time of P&A by considering it during well planning and construction.

Technical Guidance for Petroleum Exploration and Production Plans

Technical Guidance for Petroleum Exploration and Production Plans
Author: Tarek Al-Arbi Omar Ganat
Publisher: Springer Nature
Total Pages: 101
Release: 2020-03-31
Genre: Technology & Engineering
ISBN: 3030452506

This book presents detailed explanations of how to formulate field development plans for oil and gas discovery. The data and case studies provided here, obtained from the authors’ field experience in the oil and gas industry around the globe, offer a real-world context for the theories and procedures discussed. The book covers all aspects of field development plan processes, from reserve estimations to economic analyses. It shows readers in both the oil and gas industry and in academia how to prepare field development plans in a straightforward way, and with substantially less uncertainty.

Carbonate Reservoirs

Carbonate Reservoirs
Author: Clyde H. Moore
Publisher: Newnes
Total Pages: 389
Release: 2013-08-12
Genre: Science
ISBN: 0444538321

The 2nd Edition of Carbonate Reservoirs aims to educate graduate students and industry professionals on the complexities of porosity evolution in carbonate reservoirs. In the intervening 12 years since the first edition, there have been numerous studies of value published that need to be recognized and incorporated in the topics discussed. A chapter on the impact of global tectonics and biological evolution on the carbonate system has been added to emphasize the effects of global earth processes and the changing nature of life on earth through Phanerozoic time on all aspects of the carbonate system. The centerpiece of this chapter—and easily the most important synthesis of carbonate concepts developed since the 2001 edition—is the discussion of the CATT hypothesis, an integrated global database bringing together stratigraphy, tectonics, global climate, oceanic geochemistry, carbonate platform characteristics, and biologic evolution in a common time framework. Another new chapter concerns naturally fractured carbonates, a subject of increasing importance, given recent technological developments in 3D seismic, reservoir modeling, and reservoir production techniques. - Detailed porosity classifications schemes for easy comparison - Overview of the carbonate sedimentologic system - Case studies to blend theory and practice

Composition and Properties of Drilling and Completion Fluids

Composition and Properties of Drilling and Completion Fluids
Author: Ryen Caenn
Publisher: Gulf Professional Publishing
Total Pages: 721
Release: 2011-09-29
Genre: Technology & Engineering
ISBN: 0123838592

The petroleum industry in general has been dominated by engineers and production specialists. The upstream segment of the industry is dominated by drilling/completion engineers. Usually, neither of those disciplines have a great deal of training in the chemistry aspects of drilling and completing a well prior to its going on production. The chemistry of drilling fluids and completion fluids have a profound effect on the success of a well. For example, historically the drilling fluid costs to drill a well have averaged around 7% of the overall cost of the well, before completion. The successful delivery of up to 100% of that wellbore, in many cases may be attributable to the fluid used. Considered the "bible" of the industry, Composition and Properties of Drilling and Completion Fluids, first written by Walter Rogers in 1948, and updated on a regular basis thereafter, is a key tool to achieving successful delivery of the wellbore. In its Sixth Edition, Composition and Properties of Drilling and Completion Fluids has been updated and revised to incorporate new information on technology, economic, and political issues that have impacted the use of fluids to drill and complete oil and gas wells. With updated content on Completion Fluids and Reservoir Drilling Fluids, Health, Safety & Environment, Drilling Fluid Systems and Products, new fluid systems and additives from both chemical and engineering perspectives, Wellbore Stability, adding the new R&D on water-based muds, and with increased content on Equipment and Procedures for Evaluating Drilling Fluid Performance in light of the advent of digital technology and better manufacturing techniques, Composition and Properties of Drilling and Completion Fluids has been thoroughly updated to meet the drilling and completion engineer's needs. - Explains a myriad of new products and fluid systems - Cover the newest API/SI standards - New R&D on water-based muds - New emphases on Health, Safety & Environment - New Chapter on waste management and disposal