Numerical Optimization of Circulation Control Airfoils

Numerical Optimization of Circulation Control Airfoils
Author: Tsze C. Tai
Publisher:
Total Pages: 52
Release: 1980
Genre:
ISBN:

A numerical procedure developed for optimizing the circulation control airfoils is presented. The procedure finds the optimum basis airfoil shapes subjected to specified flow conditions and geometric constraints. It consists of a numerical optimization code for linear constrained problems coupled with a viscous-potential flow interaction analysis for necessary viscous-inviscid flow field calculations. The desired airfoil shape is defined by a combination of baseline shapes representative of airfoils suitable for circulation control purposes. The coefficients of these basis vectors are then used as the design variables in the optimization process. Three baseline shapes (a cambered ellipse, a cambered ellipse with a drooped trailing edge, and a cambered ellipse with a logarithmically spiralled trailing edge) are employed for special contouring of the trailing edge geometry. With some minor modification of the analysis method, the combined program allows optimization for maximum lift without substantial difficulty; but for minimizing the drag, further improvement of the analysis method is required.

Numerical Investigation of Flow Control Over an Airfoil

Numerical Investigation of Flow Control Over an Airfoil
Author: Eray AKÇAYÖZ
Publisher: LAP Lambert Academic Publishing
Total Pages: 88
Release: 2010-05
Genre:
ISBN: 9783838356013

The synthetic jet is applied over an airfoil to control the flow separation. Response Surface Methodology is employed for the optimization of synthetic jet parameters at various angles of attack. The synthetic jet parameters; the jet velocity, the jet location, the jet angle and the jet frequency are optimized to maximize the lift to drag ratio. The jet power coefficient is kept constant in the optimization. The lift to drag ratio increased significantly especially at post stall angles of attack.

New Results in Numerical and Experimental Fluid Mechanics VII

New Results in Numerical and Experimental Fluid Mechanics VII
Author: Andreas Dillmann
Publisher: Springer Science & Business Media
Total Pages: 629
Release: 2010-10-05
Genre: Technology & Engineering
ISBN: 3642142435

th This volume contains the papers presented at the 16 DGLR/STAB-Symposium held at the Eurogress Aachen and organized by RWTH Aachen University, Germany, November, 3 - 4, 2008. STAB is the German Aerospace Aerodynamics Association, founded towards the end of the 1970's, whereas DGLR is the German Society for Aeronautics and Astronautics (Deutsche Gesellschaft für Luft- und Raumfahrt - Lilienthal Oberth e.V.). The mission of STAB is to foster development and acceptance of the discipline “Aerodynamics” in Germany. One of its general guidelines is to concentrate resources and know-how in the involved institutions and to avoid duplication in research work as much as possible. Nowadays, this is more necessary than ever. The experience made in the past makes it easier now, to obtain new knowledge for solving today's and tomorrow's problems. STAB unites German scientists and engineers from universities, research-establishments and industry doing research and project work in numerical and experimental fluid mechanics and aerodynamics for aerospace and other applications. This has always been the basis of numerous common research activities sponsored by different funding agencies. Since 1986 the symposium has taken place at different locations in Germany every two years. In between STAB workshops regularly take place at the DLR in Göttingen.