Variable Density Fluid Turbulence

Variable Density Fluid Turbulence
Author: P. Chassaing
Publisher: Springer Science & Business Media
Total Pages: 387
Release: 2013-06-29
Genre: Science
ISBN: 9401700753

The first part aims at providing the physical and theoretical framework of the analysis of density variations in fully turbulent flows. Its scope is deliberately educational. In the second part, basic data on dynamical and scalar properties of variable density turbulent flows are presented and discussed, based on experimental data and/or results from direct numerical simulations. This part is rather concerned with a research audience. The last part is more directly devoted to an engineering audience and deals with prediction methods for turbulent flows of variable density fluid. Both first and second order, single point modeling are discussed, with special emphasis on the capability to include specific variable density / compressibility effects.

High Performance Computing in Science and Engineering ' 08

High Performance Computing in Science and Engineering ' 08
Author: Wolfgang E. Nagel
Publisher: Springer Science & Business Media
Total Pages: 596
Release: 2009-01-10
Genre: Mathematics
ISBN: 3540883037

The discussions and plans on all scienti?c, advisory, and political levels to realize an even larger “European Supercomputer” in Germany, where the hardware costs alone will be hundreds of millions Euro – much more than in the past – are getting closer to realization. As part of the strategy, the three national supercomputing centres HLRS (Stuttgart), NIC/JSC (Julic ̈ h) and LRZ (Munich) have formed the Gauss Centre for Supercomputing (GCS) as a new virtual organization enabled by an agreement between the Federal Ministry of Education and Research (BMBF) and the state ministries for research of Baden-Wurttem ̈ berg, Bayern, and Nordrhein-Westfalen. Already today, the GCS provides the most powerful high-performance computing - frastructure in Europe. Through GCS, HLRS participates in the European project PRACE (Partnership for Advances Computing in Europe) and - tends its reach to all European member countries. These activities aligns well with the activities of HLRS in the European HPC infrastructure project DEISA (Distributed European Infrastructure for Supercomputing Appli- tions) and in the European HPC support project HPC-Europa. Beyond that, HLRS and its partners in the GCS have agreed on a common strategy for the installation of the next generation of leading edge HPC hardware over the next ?ve years. The University of Stuttgart and the University of Karlsruhe have furth- more agreed to bundle their competences and resources.

Springer Handbook of Experimental Fluid Mechanics

Springer Handbook of Experimental Fluid Mechanics
Author: Cameron Tropea
Publisher: Springer Science & Business Media
Total Pages: 1570
Release: 2007-10-09
Genre: Science
ISBN: 3540251413

Accompanying DVD-ROM contains ... "all chapters of the Springer Handbook."--Page 3 of cover.

Physical Nonequilibrium in Soils

Physical Nonequilibrium in Soils
Author: H. Magdi Selim
Publisher: CRC Press
Total Pages: 500
Release: 2022-01-27
Genre: Science
ISBN: 1000115178

Physical Nonequilibrium in Soils provides cutting-edge knowledge on physical nonequilibrium phenomena in soils, offering unique insight into the complexity of our physical world. With 18 chapters comprising the book, topics cover soil properties fluid properties mechanistic models transfer function geostatistics fractal analysis cellular-automation fluids coupling of physical and chemical nonequilibrium models confirming and quantifying physical nonequilibrium in soils analytical solutions field-scale research environmental impacts.

Modeling Atmospheric and Oceanic Flows

Modeling Atmospheric and Oceanic Flows
Author: Thomas von Larcher
Publisher: John Wiley & Sons
Total Pages: 383
Release: 2014-10-30
Genre: Science
ISBN: 1118855922

Modeling Atmospheric and Oceanic Flows: Insights from Laboratory Experiments and Numerical Simulations provides a broad overview of recent progress in using laboratory experiments and numerical simulations to model atmospheric and oceanic fluid motions. This volume not only surveys novel research topics in laboratory experimentation, but also highlights recent developments in the corresponding computational simulations. As computing power grows exponentially and better numerical codes are developed, the interplay between numerical simulations and laboratory experiments is gaining paramount importance within the scientific community. The lessons learnt from the laboratory–model comparisons in this volume will act as a source of inspiration for the next generation of experiments and simulations. Volume highlights include: Topics pertaining to atmospheric science, climate physics, physical oceanography, marine geology and geophysics Overview of the most advanced experimental and computational research in geophysics Recent developments in numerical simulations of atmospheric and oceanic fluid motion Unique comparative analysis of the experimental and numerical approaches to modeling fluid flow Modeling Atmospheric and Oceanic Flows will be a valuable resource for graduate students, researchers, and professionals in the fields of geophysics, atmospheric sciences, oceanography, climate science, hydrology, and experimental geosciences.

Design and Modeling of Mechanical Systems—III

Design and Modeling of Mechanical Systems—III
Author: Mohamed Haddar
Publisher: Springer
Total Pages: 1225
Release: 2017-11-25
Genre: Technology & Engineering
ISBN: 3319666975

This book offers a collection of original peer-reviewed contributions presented at the 7th International Congress on Design and Modeling of Mechanical Systems (CMSM’2017), held in Hammamet, Tunisia, from the 27th to the 29th of March 2017. It reports on both research findings, innovative industrial applications and case studies concerning mechanical systems and related to modeling and analysis of materials and structures, multiphysics methods, nonlinear dynamics, fluid structure interaction and vibroacoustics, design and manufacturing engineering. Continuing on the tradition of the previous editions, this proceedings offers a broad overview on the state-of-the art in the field and a useful resource for academic and industry specialists active in the field of design and modeling of mechanical systems. CMSM’2017 was jointly organized by two leading Tunisian research laboratories: the Mechanical, Modeling and Manufacturing Laboratory of the National Engineering School of Sfax and the Mechanical Engineering Laboratory of the National Engineering School of Monastir..

Groundwater Modelling in Arid and Semi-Arid Areas

Groundwater Modelling in Arid and Semi-Arid Areas
Author: Howard S. Wheater
Publisher: Cambridge University Press
Total Pages:
Release: 2010-09-09
Genre: Science
ISBN: 1139489720

Arid and semi-arid regions face major challenges in the management of scarce freshwater resources under pressures of population, economic development, climate change, pollution and over-abstraction. Groundwater is commonly the most important water resource in these areas. Groundwater models are widely used globally to understand groundwater systems and to guide decisions on management. However, the hydrology of arid and semi-arid areas is very different from that of humid regions, and there is little guidance on the special challenges of groundwater modelling for these areas. This book brings together the experience of internationally leading experts to fill a gap in the scientific and technical literature. It introduces state-of-the-art methods for modelling groundwater resources, illustrated with a wide-ranging set of illustrative examples from around the world. The book is valuable for researchers, practitioners in developed and developing countries, and graduate students in hydrology, hydrogeology, water resources management, environmental engineering and geography.