Non-Equilibrium Charge Motion in Organic Solar Cells

Non-Equilibrium Charge Motion in Organic Solar Cells
Author: Armantas Melianas
Publisher: Linköping University Electronic Press
Total Pages: 101
Release: 2017-04-18
Genre:
ISBN: 9176855635

Organic photovoltaic (OPV) devices based on semiconducting polymers and small molecules allow for a low cost alternative to inorganic solar cells. Recent developments show power conversion efficiencies as high as 10-12%, highlighting the potential of this technology. Nevertheless, further improvements are necessary to achieve commercialization. To a large extent the performance of these devices is dictated by their ability to extract the photo-generated charge, which is related to the charge carrier mobility. Various time-resolved and steady-state techniques are available to probe the charge carrier mobility in OPVs but often lead to different mobility values for one and the same system. Despite such conflicting observations it is generally assumed that charge transport in OPV devices can be described by well-defined charge carrier mobilities, typically obtained using a single steady-state technique. This thesis shows that the relevance of such well-defined mobilities for the charge separation and extraction processes is very limited. Although different transient techniques probe different time scales after photogeneration, they are mutually consistent as they probe the same physical mechanism governing charge motion – gradual thermalization of the photo-generated carriers in the disorder broadened density of states (DOS). The photo-generated carriers gradually lose their excess energy during transport to the extracting electrodes, but not immediately. Typically not all excess energy is dissipated as the photo-generated carriers tend to be extracted from the OPV device before reaching quasi-equilibrium. Carrier motion is governed by thermalization, leading to a time-dependent carrier mobility that is significantly higher than the steady-state mobility. This picture is confirmed by several transient techniques: Time-resolved Terahertz Spectroscopy (TRTS), Time-resolved Microwave Conductance (TRMC) combined with Transient Absorption (TA), electrical extraction of photo-induced charges (photo-CELIV). The connection between transient and steady-state mobility measurements (space-charge limited conductivity, SCLC) is described. Unification of transient opto-electric techniques to probe charge motion in OPVs is presented. Using transient experiments the distribution of extraction times of photo-generated charges in an operating OPV device has been determined and found to be strongly dispersive, spanning several decades in time. In view of the strong dispersion in extraction times the relevance of even a well-defined time-dependent mean mobility is limited. In OPVs a continuous ‘percolating’ donor network is often considered necessary for efficient hole extraction, whereas if the network is discontinuous, hole transport is thought to deteriorate significantly, limiting device performance. Here, it is shown that even highly diluted donor sites (5.7-10 %) in a buckminsterfullerene (C60) matrix enable reasonably efficient hole transport. Using transient measurements it is demonstrated that hole transport between isolated donor sites can occur by long-range hole tunneling (over distances of ~4 nm) through several C60 molecules – even a discontinuous donor network enables hole transport

Effects of Energetic Disorder on the Optoelectronic Properties of Organic Solar Cells

Effects of Energetic Disorder on the Optoelectronic Properties of Organic Solar Cells
Author: Nikolaos Felekidis
Publisher: Linköping University Electronic Press
Total Pages: 76
Release: 2018-09-10
Genre:
ISBN: 9176852717

Organic photovoltaics (OPVs) is a promising low-cost and environmental-friendly technology currently achieving 12-14% power conversion efficiency. Despite the extensive focus of the research community over the last years, critical mechanisms defining the performance of OPVs are still topics of debate. While energetic disorder is known to be characteristic of organic semiconductors in general, its potential role in OPV has received surprisingly little attention. In this thesis we investigate some aspects of the relation between energetic disorder and several optoelectronic properties of OPV. Charge carrier mobility is a key parameter in characterizing the performance of organic semiconductors. Analyzing the temperature dependence of the mobility is also an oftenused method to obtain (estimates for) the energetic disorder in the HOMO and LUMO levels of an organic semiconductor material. Different formalisms to extract and analyze mobilities from space charge limited conductivity (SCLC) experiments are reviewed. Surprisingly, the Murgatroyd-Gill analytical model in combination with the Gaussian disorder model in the Boltzmann limit yields similar mobilities and energetic disorders as a more elaborate drift-diffusion model with parametrized mobility functionals. Common analysis and measurement errors are discussed. All the models are incorporated in an automated analysis freeware tool. The open circuit voltage (Voc) has attracted considerable interest as the large difference between Voc and the bandgap is the main loss mechanism in bulk heterojunction OPVs. Surprisingly, in ternary devices composed of two donors and one acceptor, the Voc is not pinned to the shallowest HOMO but demonstrates a continuous tunability between the binary extremities. We show that this phenomenon can be explained with an equilibrium model where Voc is defined as the splitting of the quasi-Fermi levels of the photo-created holes and electrons in a common density of states accounting for the stoichiometry, i.e. the ratio of the donor materials and the broadening by Gaussian disorder. Evaluating the PCE, it is found that ternary devices do not offer advantages over binary unless the fill factor (FF) is increased at intermediate compositions, as a result of improved transport/recombination upon material blending. Stressing the importance of material intermixing to improve the performance, we found that the presence of an acceptor may drastically alter the mobility and energetic disorder of the donor and vice versa. The effect of different acceptors was studied in a ternary onedonor- two-acceptors system, where the unpredictable variability with composition of the energetic disorder in the HOMO and the LUMO explained the almost linear tunability of Voc. Designing binary OPVs based on the design rule that the energetic disorder can be reduced upon material blending, as we observed, can yield a relative PCE improvement of at least 20%. CT states currently play a key role in evaluating the performance of OPVs and CTelectroluminescence (CT-EL) is assumed to stem from the recombination of thermalized electron-hole pairs. The varying width of the CT-EL peak for different material combinations is intuitively expected to reflect the energetic disorder of the effective HOMO and LUMO. We employ kinetic Monte Carlo (kMC) CT-EL simulations, using independently measured disorder parameters as input, to calculate the ground-to-ground state (0-0) transition spectrum. Including the vibronic broadening according to the Franck Condon principle, we reproduce the width and current dependence of the measured CT-EL peak for a large number of donor-acceptor combinations. The fitted dominant phonon modes compare well with the values measured using the spectral line narrowing technique. Importantly, the calculations show that CT-EL originates from a narrow, non-thermalized subset of all available CT states, which can be understood by considering the kinetic microscopic process with which electron-hole pairs meet and recombine. Despite electron-hole pairs being strongly bound in organic materials, the charge separation process following photo-excitation is found to be extremely efficient and independent of the excitation energy. However, at low photon energies where the charges are excited deep in the tail of the DOS, it is intuitively expected for the extraction yield to be quenched. Internal Quantum Efficiency (IQE) experiments for different material systems show both inefficient and efficient charge dissociation for excitation close to the CT energy. This finding is explained by kinetic Monte Carlo simulations accounting for a varying degree of e-h delocalization, where strongly bound localized CT pairs (< 2nm distance) are doomed to recombine at low excitation energies while extended delocalization over 3-5nm yields an increased and energy-independent IQE. Using a single material parameter set, the experimental CT electroluminescence and absorption spectra are reproduced by the same kMC model by accounting for the vibronic progression of the calculated 0-0 transition. In contrast to CT-EL, CT-absorption probes the complete CT manifold. Charge transport in organic solar cells is currently modelled as either an equilibrium or a non-equilibrium process. The former is described by drift-diffusion (DD) equations, which can be calculated quickly but assume local thermal equilibrium of the charge carriers with the lattice. The latter is described by kMC models, that are time-consuming but treat the charge carriers individually and can probe all relevant time and energy scales. A hybrid model that makes use of the multiple trap and release (MTR) concept in combination with the DD equations is shown to describe both steady-state space charge limited conductivity experiments and non-equilibrium time-resolved transport experiments using a single parameter set. For the investigated simulations, the DD-MTR model is in good agreement with kMC and ~10 times faster. Steady-state mobilities from DD equations have been argued to be exclusively relevant for operating OPVs while charge carrier thermalization and non-equilibrium time-dependent mobilities (although acknowledged) can be disregarded. This conclusion, based on transient photocurrent experiments with ?s time resolution, is not complete. We show that non-equilibrium kMC simulations can describe the extraction of charge carriers from subps to 100 ?s timescales with a single parameter set. The majority of the fast charge carriers, mostly non-thermalized electrons, are extracted at time scales below the resolution of the experiment. In other words, the experiment resolves only the slower fraction of the charges, predominantly holes.

Proceedings of the Sixth International Symposium on Dielectric Materials and Applications (ISyDMA’6)

Proceedings of the Sixth International Symposium on Dielectric Materials and Applications (ISyDMA’6)
Author: Ashok Vaseashta
Publisher: Springer Nature
Total Pages: 279
Release: 2022-09-25
Genre: Science
ISBN: 3031113977

This book addresses to the materials scientists, physicists, chemists, biologists, and electrical engineers engaged in fundamental and applied research or technical investigations on such materials. The goal of the International Symposium on Dielectric Materials and Applications conference series is to provide an innovative platform for key researchers, scientists from all over the world to exchange ideas and to hold wide ranging discussions on recent developments in dielectric materials and their new and emerging applications. The aim of ISyDMA meeting is to provide an international forum for the discussion of current research on high k-dielectric, electrical insulation, dielectric phenomena, and topics related to emerging applications.

Unconventional Thin Film Photovoltaics

Unconventional Thin Film Photovoltaics
Author: Alison Walker
Publisher: Royal Society of Chemistry
Total Pages: 502
Release: 2016
Genre: Science
ISBN: 1782622934

Covering both organic materials, where recent advances in the understanding of device physics is driving progress, and the newly emerging field of mixed halide perovskites, which are challenging the efficiencies of conventional thin film PV cells, this book provides a balanced overview of the experimental and theoretical aspects of these solar cell classes. Emphasis is placed on understanding the fundamental physics of the devices. The book also discusses modelling over many length scales, from nano to macro. The first book to cover perovskites, this is an important reference for industrialists and researchers working in energy technologies and materials.

Physics of Solar Cells

Physics of Solar Cells
Author: Peter Würfel
Publisher: John Wiley & Sons
Total Pages: 198
Release: 2008-07-11
Genre: Science
ISBN: 3527618554

Peter Würfel describes in detail all aspects of solar cell function, the physics behind every single step, as well as all the issues to be considered when improving solar cells and their efficiency. Based on the highly successful German version, but thoroughly revised and updated, this edition contains the latest knowledge on the mechanisms of solar energy conversion. Requiring no more than standard physics knowledge, it enables readers to understand the factors driving conversion efficiency and to apply this knowledge to their own solar cell development.

The Physics of Solar Energy Conversion

The Physics of Solar Energy Conversion
Author: Juan Bisquert
Publisher: CRC Press
Total Pages: 725
Release: 2020-06-09
Genre: Science
ISBN: 0429000146

Research on advanced energy conversion devices such as solar cells has intensified in the last two decades. A broad landscape of candidate materials and devices were discovered and systematically studied for effective solar energy conversion and utilization. New concepts have emerged forming a rather powerful picture embracing the mechanisms and limitation to efficiencies of different types of devices. The Physics of Solar Energy Conversion introduces the main physico-chemical principles that govern the operation of energy devices for energy conversion and storage, with a detailed view of the principles of solar energy conversion using advanced materials. Key Features include: Highlights recent rapid advances with the discovery of perovskite solar cells and their development. Analyzes the properties of organic solar cells, lithium ion batteries, light emitting diodes and the semiconductor materials for hydrogen production by water splitting. Embraces concepts from nanostructured and highly disordered materials to lead halide perovskite solar cells Takes a broad perspective and comprehensively addresses the fundamentals so that the reader can apply these and assess future developments and technologies in the field. Introduces basic techniques and methods for understanding the materials and interfaces that compose operative energy devices such as solar cells and solar fuel converters.

Nanostructured Energy Devices

Nanostructured Energy Devices
Author: Juan Bisquert
Publisher: CRC Press
Total Pages: 342
Release: 2014-11-11
Genre: Science
ISBN: 1439836035

Due to the pressing needs of society, low cost materials for energy devices have experienced an outstanding development in recent times. In this highly multidisciplinary area, chemistry, material science, physics, and electrochemistry meet to develop new materials and devices that perform required energy conversion and storage processes with high efficiency, adequate capabilities for required applications, and low production cost. Nanostructured Energy Devices: Equilibrium Concepts and Kinetics introduces the main physicochemical principles that govern the operation of energy devices. It includes coverage of the physical principles that control energy devices made of nanostructured and bulk materials, with the main attention focused on solution processed thin film technologies. The book analyzes the fundamental concepts, main properties, and key applications of energy devices that are made using nanostructured materials and innovative thin film low cost technologies. This includes hybrid and organic solar cells, electrochemical batteries, diodes, LEDs and OLEDs, transistors, and the direct conversion of solar radiation to chemical fuels. It decodes rigorous formulation of thermodynamic concepts to establish energy diagrams, and explains also the fundamental kinetic models that determine the flow of electrons and ions in the device. The author lays out the main properties of semiconductors and their junctions for applications in solar cell and solar fuel devices. He emphasizes a unified view of the device operation principles that covers well-known examples but also enables you to discuss original research topics on a solid ground. Although a challenging field of science and technology, energy devices such as solar cells and batteries have the potential to impact the creation of a carbon-free energy economy. However, the field draws scientists from a broad set of backgrounds, united towards common goals. This text presents the main concepts that apply to several types of devices, from a very basic level so that you can gain insight into the general view of principles of operation of the energy devices. It pulls together the views and terminologies used by several communities to create better communication and increased collaboration among them.

Modelling and Design of Nanostructured Optoelectronic Devices

Modelling and Design of Nanostructured Optoelectronic Devices
Author: Jagdish A. Krishnaswamy
Publisher: Springer Nature
Total Pages: 293
Release: 2022-04-02
Genre: Science
ISBN: 9811906076

This book approaches the design of functionally superior optoelectronic devices through the use of bio-inspired nanostructures and multiscale material structures through a step-by-step approach. The book combines both the fundamental theoretical concepts involved in understanding and numerically modelling optoelectronic devices and the application of such methods in addressing challenging research problems in nanostructured optoelectronic design and fabrication. The book offers comprehensive content in optoelectronic materials and engineering and can be used as a reference material by researchers in nanostructured optoelectronic design.

Chemical Modelling

Chemical Modelling
Author: Michael Springborg
Publisher: Royal Society of Chemistry
Total Pages: 293
Release: 2016-11-01
Genre: Science
ISBN: 1782626867

Chemical modelling covers a wide range of disciplines and with the increase in volume, velocity and variety of information, researchers can find it difficult to keep up to date with the literature in this field. This book is the first stop for any materials scientist, biochemist, chemist or molecular physicist wishing to acquaint themselves with major developments in the applications and theory of chemical modelling. Containing both comprehensive and critical reviews, its coverage includes materials for energy storage, nanoflakes, chemical modelling of fluidics near surfaces and organic solar cells.

Solar Energy Capture Materials

Solar Energy Capture Materials
Author: Elizabeth A Gibson
Publisher: Royal Society of Chemistry
Total Pages: 221
Release: 2019-08-19
Genre: Technology & Engineering
ISBN: 1788018508

Energy is an important area of contemporary research, with clear societal benefits. It is a fast-developing and application-driven research area, with chemistry leading the discovery of new solids, which are then studied by physicists and materials scientists. Solar Energy Capture Materials introduces a range of the different inorganic materials used, with an emphasis on how solid-state chemistry allows development of new functional solids for energy applications. Dedicated chapters cover silicon-based photovoltaic devices, compound semiconductor-based solar cells, dye-sensitized solar cells (DSC), solution processed solar cells and emerging materials. Edited and written by world-renowned scientists, this book will provide a comprehensive introduction for advanced undergraduates, postgraduates and researchers wishing to learn about the topic.