Nanostructured Immiscible Polymer Blends

Nanostructured Immiscible Polymer Blends
Author: Suprakas Sinha Ray
Publisher: Elsevier
Total Pages: 242
Release: 2019-09-17
Genre: Technology & Engineering
ISBN: 0128168781

Nanostructured Immiscible Polymer Blends: Migration and Interface covers a wide range of nanoparticle types, emphasizing the mechanisms and parameters involved in the migration of nanofillers inside immiscible polymer blends. This book explores the influence of nanoparticle migration on the localization, and hence, morphology development, electrical conductivity, and met-rheological properties of blended composite materials. As the influence of solid particles, ranging in size from several hundred nanometers to a few microns in immiscible polymer blends has been extensively studied for use as compatibilizers, morphology stabilizers, and reinforcement agents, this book is a timely resource. - Outlines techniques used to prepare nanoparticles-modified immiscible polymer blend composites - Explains the structural and morphological development, and melt-state rheological behaviors of nanoparticles-modified immiscible polymer blend composites - Discusses major industrial applications

Design and Applications of Nanostructured Polymer Blends and Nanocomposite Systems

Design and Applications of Nanostructured Polymer Blends and Nanocomposite Systems
Author: Sabu Thomas
Publisher: William Andrew
Total Pages: 444
Release: 2015-09-22
Genre: Technology & Engineering
ISBN: 032339454X

Design and Applications of Nanostructured Polymer Blend and Nanocomposite Systems offers readers an intelligent, thorough introduction to the design and applications of this new generation of designer polymers with customized properties. The book assembles and covers, in a unified way, the state-of-the-art developments of this less explored type of material. With a focus on nanostructured polymer blends, the book discusses the science of nanostructure formation and the potential performance benefits of nanostructured polymer blends and composites for applications across many sectors: electronics, coatings, adhesives, energy (photovoltaics), aerospace, automotive, and medical devices (biocompatible polymers). The book also describes the design, morphology, and structure of nanostructured polymer composites and blends to achieve specific properties. - Covers all important information for designing and selecting the right nanostructured polymer system - Provides specialized knowledge on self-repairing, nanofibre and nanostructured multiphase materials, as well as evaluation and testing of nanostructured polymer systems - Serves as a reference guide for development of new products in industries ranging from electronics, coatings, and energy, to transport and medical applications - Describes the design, morphology, and structure of nanostructured polymer composites and blends to achieve specific properties

Micro- and Nanostructured Multiphase Polymer Blend Systems

Micro- and Nanostructured Multiphase Polymer Blend Systems
Author: Charef Harrats
Publisher: CRC Press
Total Pages: 455
Release: 2005-09-29
Genre: Science
ISBN: 1420026542

Micro- and Nanostructured Multiphase Polymer Blend Systems: Phase Morphology and Interfaces focuses on the formation of phase morphology in polymer blends and copolymers and considers various types of blends including thermosets, thermoplastics, thermoplastic vulcanizates, and structured copolymers. The book carefully debates the processing

Nanostructured Polymer Blends

Nanostructured Polymer Blends
Author: Sabu Thomas
Publisher: William Andrew
Total Pages: 570
Release: 2013-11-28
Genre: Technology & Engineering
ISBN: 1455731609

Over 30% of commercial polymers are blends or alloys or one kind or another. Nanostructured blends offer the scientist or plastics engineer a new range of possibilities with characteristics including thermodynamic stablility; the potential to improve material transparency, creep and solvent resistance; the potential to simultaneously increase tensile strength and ductility; superior rheological properties; and relatively low cost. Nanostructured Polymer Blends opens up immense structural possibilities via chemical and mechanical modifications that generate novel properties and functions and high-performance characteristics at a low cost. The emerging applications of these new materials cover a wide range of industry sectors, encompassing the coatings and adhesives industry, electronics, energy (photovoltaics), aerospace and medical devices (where polymer blends provide innovations in biocompatible materials). This book explains the science of nanostructure formation and the nature of interphase formations, demystifies the design of nanostructured blends to achieve specific properties, and introduces the applications for this important new class of nanomaterial. All the key topics related to recent advances in blends are covered: IPNs, phase morphologies, composites and nanocomposites, nanostructure formation, the chemistry and structure of additives, etc. - Introduces the science and technology of nanostructured polymer blends – and the procedures involved in melt blending and chemical blending to produce new materials with specific performance characteristics - Unlocks the potential of nanostructured polymer blends for applications across sectors, including electronics, energy/photovoltaics, aerospace/automotive, and medical devices (biocompatible polymers) - Explains the performance benefits in areas including rheological properties, thermodynamic stablility, material transparency, solvent resistance, etc.

Recent Developments in Polymer Macro, Micro and Nano Blends

Recent Developments in Polymer Macro, Micro and Nano Blends
Author: P.M. Visakh
Publisher: Woodhead Publishing
Total Pages: 344
Release: 2016-08-24
Genre: Technology & Engineering
ISBN: 0081004273

Recent Developments in Polymer Macro, Micro and Nano Blends: Preparation and Characterisation discusses the various types of techniques that are currently used for the characterization of polymer-based macro, micro, and nano blends. It summarizes recent technical research accomplishments, emphasizing a broad range of characterization methods. In addition, the book discusses preparation methods and applications for various types of polymer-based macro, micro, and nano blends. Chapters include thermoplastic-based polymer & nano blends, applications of rubber based and thermoplastic blends, micro/nanostructures polymer blends containing block copolymers, advances in polymer-inorganic hybrids as membrane materials, synthesis of polymer/inorganic hybrids through heterophase polymerizations, nanoporous polymer foams from nanostructured polymer blends, and natural polymeric biodegradable nano blends for protein delivery. - Describes the techniques pertaining to a kind (or small number) of blends, showing specific examples of their applications - Covers micro, macro, and nano polymer blends - Contains contributions from leading experts in the field

Micro and Nanostructured Epoxy / Rubber Blends

Micro and Nanostructured Epoxy / Rubber Blends
Author: Sabu Thomas
Publisher: John Wiley & Sons
Total Pages: 462
Release: 2014-11-03
Genre: Technology & Engineering
ISBN: 3527333347

Epoxy resins are polymers which are extensively used as coating materials due to their outstanding mechanical properties and good handling characteristics. A disadvantage results from their high cross-link density: they are brittle and have very low resistance to crack growth and propagation. This necessitates the toughening of the epoxy matrix without impairing its good thermomechanical properties. The final properties of the polymer depend on their structure. The book focuses on the microstructural aspects in the modification of epoxy resins with low molecular weight liquid rubbers, one of the prime toughening agents commonly employed. The book follows thoroughly the reactions of elastomer-modified epoxy resins from their liquid stage to the network formation. It gives an in-depth view into the cure reaction, phase separation and the simultaneous development of the morphology. Chapters on ageing, failure analysis and life cycle analysis round out the book.

Micro and Nano Fibrillar Composites (MFCs and NFCs) from Polymer Blends

Micro and Nano Fibrillar Composites (MFCs and NFCs) from Polymer Blends
Author: Raghvendra Kumar Mishra
Publisher: Woodhead Publishing
Total Pages: 370
Release: 2017-06-19
Genre: Technology & Engineering
ISBN: 0081019920

Micro and Nano Fibrillar Composites (MFCs and NFCs) from Polymer Blends is a comprehensive reference for researchers, students and scientists working in the field of plastics recycling and composites. The book aims to determine the influence of micro and nanofibrillar morphology on the properties of immiscible blend systems. Chapters cover micro and nanofibrillar composites based on polyolefin, liquid crystal polymer, biodegradable polymers, polyester and polyamide blends in various industrial application fields. The book brings together panels of highly-accomplished experts in the field of plastics recycling, blends and composites systems. For several decades, plastic technology has played an important role in many industrial applications, such as packaging, automobiles, aerospace and construction. However the increasing use of plastics creates a lot of waste. This has led to restrictions on the use of some plastics for certain applications and a drive towards recycling of plastics. More recently, microfibrillar in-situ composites have been prepared from waste plastics such as PET/PP, PET/PE and Nylon/PP as a way of formulating new high performance polymer systems. This book tackles these issues and more, and is an ideal resource for anyone interested in polymer blends. - Provides information on MFC and NFC based polymer blends that have been accumulated over the last 25 years, providing a useful reference - Adopts a novel approach in terms of understanding the relationship between processing, morphology, structure, properties and applications in micro and nanofibrillar composites - Contains contributions from leading experts in the field from both industrial and academic research

Micro- and Nanostructured Polymer Systems

Micro- and Nanostructured Polymer Systems
Author: Sabu Thomas
Publisher: CRC Press
Total Pages: 339
Release: 2016-01-05
Genre: Science
ISBN: 1498721591

This book focuses on the recent trends in micro- and nano-structured polymer systems, particularly natural polymers, biopolymers, biomaterials, and their composites, blends, and IPNs. This valuable volume covers the occurrence, synthesis, isolation, production, properties and applications, modification, as well as the relevant analysis techniques t

Conjugated Polymer Nanostructures for Energy Conversion and Storage Applications

Conjugated Polymer Nanostructures for Energy Conversion and Storage Applications
Author: Srabanti Ghosh
Publisher: John Wiley & Sons
Total Pages: 38
Release: 2021-06-01
Genre: Technology & Engineering
ISBN: 3527345574

A timely overview of fundamental and advanced topics of conjugated polymer nanostructures Conjugated Polymer Nanostructures for Energy Conversion and Storage Applications is a comprehensive reference on conjugated polymers for energy applications. Distinguished academic and editor Srabanti Ghosh offers readers a broad overview of the synthesis, characterization, and energy-related applications of nanostructures based on conjugated polymers. The book includes novel approaches and presents an interdisciplinary perspective rooted in the interfacing of polymer and synthetic chemistry, materials science, organic chemistry, and analytical chemistry. This book provides complete descriptions of conjugated polymer nanostructures and polymer-based hybrid materials for energy conversion, water splitting, and the degradation of organic pollutants. Photovoltaics, solar cells, and energy storage devices such as supercapacitors, lithium ion battery electrodes, and their associated technologies are discussed, as well. Conjugated Polymer Nanostructures for Energy Conversion and Storage Applications covers both the fundamental topics and the most recent advances in this rapidly developing area, including: The design and characterization of conjugated polymer nanostructures, including the template-free and chemical synthesis of polymer nanostructures Conjugated polymer nanostructures for solar energy conversion and environmental protection, including the use of conjugated polymer-based nanocomposites as photocatalysts Conjugated polymer nanostructures for energy storage, including the use of nanocomposites as electrode materials The presentation of different and novel methods of utilizing conjugated polymer nanostructures for energy applications Perfect for materials scientists, polymer chemists, and physical chemists, Conjugated Polymer Nanostructures for Energy Conversion and Storage Applications also belongs on the bookshelves of organic chemists and any other practicing researchers, academics, or professionals whose work touches on these highly versatile and useful structures.

Nanostructured Polymer Blends

Nanostructured Polymer Blends
Author: Golap Kalita
Publisher: Elsevier Inc. Chapters
Total Pages: 29
Release: 2013-11-28
Genre: Technology & Engineering
ISBN: 012809091X

Blending conducting polymers with inorganic nanostructures has attracted significant interest as a means of combining the desirable physical and optoelectronic properties of both materials. This chapter explains the fabrication and characterization of silicon (Si) nanostructures and blending them with conducting polymers. Si nanocrystals, nanowires, and nanocones were synthesized from Si wafers to fabricate high efficiency solar cells at very low processing cost. Conducting polymers such as poly(3-octylthiophene) and poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) were solution casted on the nanostructured Si surface to fabricate a heterojunction. Recent development of the fabrication process and characteristics of solar cells with different silicon nanostructures and conducting polymers are discussed.