Motorcycle Tuning Two-Stroke

Motorcycle Tuning Two-Stroke
Author: John Robinson
Publisher: Butterworth-Heinemann
Total Pages: 182
Release: 2001
Genre: Technology & Engineering
ISBN: 9780750618069

In this well established book, now brought up to date in a second edition, the Technical Editor of `Performance Bikes' shows you how to evaluate your engine, how to assess what work you can undertake yourself, and what is best left to a specialist. The great attraction of the two-stroke is its enormous potential, contrasted with its appealing simplicity. Armed with little more than a set of files, you can make profound changes to the output power of a two-stroke. But these changes will increase the power only if you know what you are doing. `Motor Cycle Tuning (Two-stroke)' will therefore guide you through the necessary stages which can enable a stock roadster engine can be turned into a machine capable of winning open-class races, for an outlay which is positively low by racing standards. Very few other books on engine development and most of these are either devoted to car engines or are out of date Promoted by PERFORMANCE BIKES

Motor Cycle Tuning (four-stroke)

Motor Cycle Tuning (four-stroke)
Author: John Robinson
Publisher: Butterworth-Heinemann
Total Pages: 194
Release: 1994
Genre: Technology & Engineering
ISBN: 9780750618052

This classic has been completely updated for the second edition. John Robinson, the Technical Editor of Performance Bikes', explains how various stages of engine tune are reached, and describes typical development work with enough theory to devise a practical development programme. The phenomena described are all known to work - the trick is making them all work together. Engine development is slow and expensive, but the results can be very rewarding, both in competition and in the sheer pleasure of using a motor which is crisp and perfectly set up. Although it is not possible to make all-round engine improvements, other than those gained by careful assembly to the exact stock tolerances, improvements in one area can be traded' for losses in another: increases in high-speed power balanced perhaps against losses in low-speed power, engine flexibility and reliability. John Robinson takes the reader through the processes which are necessary to make your four-stroke run perfectly. Will be promoted by PERFORMANCE BIKES

Two-Stroke Performance Tuning

Two-Stroke Performance Tuning
Author: A. Bell
Publisher: Haynes Publishing
Total Pages: 272
Release: 1999-11-28
Genre: Transportation
ISBN: 9781859606193

Engine-tuning expert A. Graham Bell steers you through the various modifications that can be made to coax maximum useable power output and mechanical reliability from your two-stroke. Fully revised with the latest information on all areas of engine operation, from air and fuel, through carburation, ignition, cylinders, porting, reed and rotary valves, and exhaust systems to cooling and lubrication, dyno tuning and gearing.

Two-Stroke Motorcycle Engine Maintenance and Repair

Two-Stroke Motorcycle Engine Maintenance and Repair
Author: Dave Boothroyd
Publisher: Crowood
Total Pages: 512
Release: 2016-03-31
Genre: Transportation
ISBN: 1785001213

A workshop guide to the strip-down, rebuild, maintenance and repair of two-stroke motorcycle engines. Author Dave Boothroyd covers the principles and practice of two-stroke engine work, examining a wide range of marques and road, racing and trail motorcycles. With over 450 colour photographs, this new book covers: the chronological development of two-stroke engines and workshop procedures for each era; the examination of each major engine component in turn, including cylinder head, piston, piston rings, crankcase, flywheel, bearings, inlet manifold, clutch, gearbox and primary drive, and, finally, racing motorcycles and tuning engines for best performance; diagnosing problems and workshop safety. This practical reference guide is for the two-stroke motorcycle owner or restorer and is illustrated throughout with over 450 colour photographs.

Motorcycle Tuning - 4 Stroke

Motorcycle Tuning - 4 Stroke
Author: John Robinson
Publisher: Butterworth-Heinemann
Total Pages: 152
Release: 1988-01-01
Genre: Motorcycles
ISBN: 9780750602662

This classic has been completely updated for the second edition. John Robinson, the Technical Editor of `Performance Bikes', explains how various stages of engine tune are reached, and describes typical development work with enough theory to devise a practical development programme. The phenomena described are all known to work - the trick is making them all work together. Engine development is slow and expensive, but the results can be very rewarding, both in competition and in the sheer pleasure of using a motor which is crisp and perfectly set up. Although it is not possible to make all-round engine improvements, other than those gained by careful assembly to the exact stock tolerances, improvements in one area can be `traded' for losses in another: increases in high-speed power balanced perhaps against losses in low-speed power, engine flexibility and reliability. John Robinson takes the reader through the processes which are necessary to make your four-stroke run perfectly. Will be promoted by PERFORMANCE BIKES

The High-Performance Two-Stroke Engine

The High-Performance Two-Stroke Engine
Author: John Dixon
Publisher: Haynes Publishing UK
Total Pages: 352
Release: 2005-07-15
Genre: Transportation
ISBN: 9781844250455

The two-stroke engine is widely used in both motorcycle racing and kart racing, and in very large numbers in model car, boat and aircraft competition. The mechanical simplicity of the two-stroke engine gives it tremendous appeal, and makes it a tempting target for tuning operations, but the key to successful design, development and modification is knowledge of the engine¿s operating principles. This in-depth technical study of two-stroke theory and practice is intended to help would-be engine tuners to better understand the engine and the processes taking place within it, and thereby to obtain improved performance.

Popular Science

Popular Science
Author:
Publisher:
Total Pages: 248
Release: 1968-02
Genre:
ISBN:

Popular Science gives our readers the information and tools to improve their technology and their world. The core belief that Popular Science and our readers share: The future is going to be better, and science and technology are the driving forces that will help make it better.

Motorcyle Tuning: Chassis

Motorcyle Tuning: Chassis
Author: John Robinson
Publisher: Butterworth-Heinemann
Total Pages: 278
Release: 1994-04
Genre: Technology & Engineering
ISBN: 9780750618403

This third edition, in the same tradition as the second, is a vital servicing tool containing information covering virtually every motorcycle over 50cc sold in the UK since 1980. The author is technical editor of `Performance Bikes' and author of the well known `Motorcycle Tuning' books. The book provides access to the most frequently used data for dealers, mechanics and enthusiasts who have to deal with a wide variety of machines and wish to compare the features of different models. A seperate section lists conversion tables, standard torque settings for threaded fasteners, tyre size codes, tyre speed and load schedules and addersses of importers. Machines are listed alphabetically by manufacturer and then in order of capacity or model number.