Instrumentation, Testing, and Monitoring of a Newly Constructed Reinforced Concrete Deck-on-steel Girder Bridge

Instrumentation, Testing, and Monitoring of a Newly Constructed Reinforced Concrete Deck-on-steel Girder Bridge
Author:
Publisher:
Total Pages: 402
Release: 2002
Genre: Bridges
ISBN:

The measurement and documentation of construction and service effects for a steel stringer bridge will permit evaluation of the complete state of force in a bridge over its lifetime, together with the corresponding causative effects or events. Accumulated versus transient stresses and forces are evaluated through a regular regimen of long-term monitoring, diagnostic truckload and modal impact testing, and structural analysis.

Integral and Semi-Integral Bridges

Integral and Semi-Integral Bridges
Author: Martin P Burke Jr
Publisher: John Wiley & Sons
Total Pages: 272
Release: 2009-06-17
Genre: Technology & Engineering
ISBN: 1444316370

Worldwide, integral type bridges are being used in greater numbersin lieu of jointed bridges because of their structural simplicity,first-cost economy, and outstanding durability. In the UK and theUS states of Tennessee and Missouri, for example, the constructionof most moderate length bridges is based on the integral bridgeconcept. The state of Washington uses semi-integral bridges almostexclusively, while, depending on subfoundation characteristics, thestate of Ohio and others use a mix of these two bridge types. Integral and Semi-Integral Bridges has been written by apracticing bridge design engineer who has spent his entire careerinvolved in the origination, evaluation and design of such bridgesin the USA, where they have been in use since the late1930’s. This work shows how the analytical complexity due tothe elimination of movable joints can be minimized to negligiblelevels so that most moderate length bridges can be easily andquickly modified or replaced with either integral or semi-integralbridges. Bridge design, construction, and maintenance engineers; bridgedesign administrators; graduate level engineering students andstructural research professionals will all find this bookexceptionally informative for a wide range of highway bridgeapplications.

Design and Construction of Bridge Approaches

Design and Construction of Bridge Approaches
Author: Harvey E. Wahls
Publisher: Transportation Research Board
Total Pages: 56
Release: 1990
Genre: Technology & Engineering
ISBN: 9780309049054

Includes case histories of the Dumbarton Bridge (San Francisco Bay, Calif.), the Rainier Avenue Embankment (Seattle, Wash.) and the Gallows Road Grade Separation (Fairfax, Va.)

Design of Structures 2004

Design of Structures 2004
Author: National Research Council (U.S.). Transportation Research Board
Publisher:
Total Pages: 278
Release: 2004
Genre: Bridges
ISBN:

Verification of Performance and Design Criteria for High Performance Steel Bridges

Verification of Performance and Design Criteria for High Performance Steel Bridges
Author:
Publisher:
Total Pages: 148
Release: 2006
Genre: Bridges
ISBN:

High Performance Steel (HPS) has quickly gained popularity in United States bridge applications due to its high yield strength and better weldability, toughness, ductility, and weathering characteristics. However, a great deal of information is missing from the body of knowledge on HPS performance and design criteria, especially concerning HPS-70W (485W) produced by thermo-mechanical controlled processing (TMCP). This research examines material characteristics and fatigue performance of HPS-70W (485W) TMCP, as well the performance of Ohio's first HPS bridge in service. Data from 96 tensile tests show that yield and ultimate strengths of HPS-70W (485W) TMCP are dependent upon plate thickness and orientation. 75 Charpy V-Notch (CVN) specimens were tested, and all met the ASTM A709 requirement for minimum toughness. Twenty-nine specimens were tested to investigate the fatigue resistance of continuous plates with punched, drilled, and reamed holes. Results from this investigation suggest that current restrictions mandated by some state departments of transportation concerning punching holes are not overly restrictive when HPS-485W (70W) is utilized. Performance of drilled and sub-punched and reamed specimens met or exceeded American Association of State Highway and Transportation Officials (AASHTO) (2004) requirements for Category B details. Performance of Submerged Arc Weld (SAW) and Narrow Gap Improved Electroslag Weld (NGI-ESW) welded butt-splices utilizing HPS-70W (485W) were examined. All specimens performed considerably better than predicted by the AASHTO fatigue life equation.

Maintenance, Monitoring, Safety, Risk and Resilience of Bridges and Bridge Networks

Maintenance, Monitoring, Safety, Risk and Resilience of Bridges and Bridge Networks
Author: Tulio Nogueira Bittencourt
Publisher: CRC Press
Total Pages: 976
Release: 2016-11-17
Genre: Technology & Engineering
ISBN: 1351801368

Maintenance, Monitoring, Safety, Risk and Resilience of Bridges and Bridge Networks contains the lectures and papers presented at the Eighth International Conference on Bridge Maintenance, Safety and Management (IABMAS 2016), held in Foz do Iguaçu, Paraná, Brazil, 26-30 June, 2016. This volume consists of a book of extended abstracts and a DVD containing the full papers of 369 contributions presented at IABMAS 2016, including the T.Y. Lin Lecture, eight Keynote Lectures, and 360 technical papers from 38 countries. The contributions deal with the state-of-the-art as well as emerging concepts and innovative applications related to all main aspects of bridge maintenance, safety, management, resilience and sustainability. Major topics covered include: advanced materials, ageing of bridges, assessment and evaluation, bridge codes, bridge diagnostics, bridge management systems, composites, damage identification, design for durability, deterioration modeling, earthquake and accidental loadings, emerging technologies, fatigue, field testing, financial planning, health monitoring, high performance materials, inspection, life-cycle performance and cost, load models, maintenance strategies, non-destructive testing, optimization strategies, prediction of future traffic demands, rehabilitation, reliability and risk management, repair, replacement, residual service life, resilience, robustness, safety and serviceability, service life prediction, strengthening, structural integrity, and sustainability. This volume provides both an up-to-date overview of the field of bridge engineering as well as significant contributions to the process of making more rational decisions concerning bridge maintenance, safety, serviceability, resilience, sustainability, monitoring, risk-based management, and life-cycle performance using traditional and emerging technologies for the purpose of enhancing the welfare of society. It will serve as a valuable reference to all involved with bridge structure and infrastructure systems, including students, researchers and engineers from all areas of bridge engineering.

Riprap Design Criteria, Recommended Specifications, and Quality Control

Riprap Design Criteria, Recommended Specifications, and Quality Control
Author: Peter Frederick Lagasse
Publisher: Transportation Research Board
Total Pages: 226
Release: 2006
Genre: Riprap
ISBN: 0309098661

TRB's National Cooperative Highway Research Program (NCHRP) Report 568: Riprap Design Criteria, Recommended Specifications, and Quality Control examines design guidelines; recommended material specifications and test methods; recommended construction specifications; and construction, inspection, and quality control guidelines for riprap for a range of applications, including revetment on streams and riverbanks, bridge piers and abutments, and bridge scour countermeasures such as guide banks and spurs.