Mechanism Design and Analysis Using PTC Creo Mechanism 6.0

Mechanism Design and Analysis Using PTC Creo Mechanism 6.0
Author: Kuang-Hua Chang
Publisher: SDC Publications
Total Pages: 181
Release: 2019-07
Genre: Computers
ISBN: 1630572985

Mechanism Design and Analysis Using PTC Creo Mechanism 6.0 is designed to help you become familiar with Mechanism, a module of the PTC Creo Parametric software family, which supports modeling and analysis (or simulation) of mechanisms in a virtual (computer) environment. Capabilities in Mechanism allow users to simulate and visualize mechanism performance. Using Mechanism early in the product development stage could prevent costly redesign due to design defects found in the physical testing phase; therefore, it contributes to a more cost effective, reliable, and efficient product development process. The book is written following a project-based learning approach and covers the major concepts and frequently used commands required to advance readers from a novice to an intermediate level. Basic concepts discussed include model creation, such as body and joint definitions; analysis type selection, such as static (assembly) analysis, kinematics and dynamics; and results visualization. The concepts are introduced using simple, yet realistic, examples. Verifying the results obtained from computer simulation is extremely important. One of the unique features of this textbook is the incorporation of theoretical discussions for kinematic and dynamic analyses in conjunction with simulation results obtained using Mechanism. The theoretical discussions simply support the verification of simulation results rather than providing an in-depth discussion on the subjects of kinematics and dynamics.

Mechanism Design and Analysis Using PTC Creo Mechanism 4.0

Mechanism Design and Analysis Using PTC Creo Mechanism 4.0
Author: Kuang-Hua Chang
Publisher: SDC Publications
Total Pages: 180
Release: 2017
Genre: Computers
ISBN: 1630571148

Mechanism Design and Analysis Using PTC Creo Mechanism 4.0 is designed to help you become familiar with Mechanism, a module of the PTC Creo Parametric software family, which supports modeling and analysis (or simulation) of mechanisms in a virtual (computer) environment. Capabilities in Mechanism allow users to simulate and visualize mechanism performance. Capabilities in Mechanism allow users to simulate and visualize mechanism performance. Using Mechanism early in the product development stage could prevent costly redesign due to design defects found in the physical testing phase; therefore, contributing to a more cost effective, reliable, and efficient product development process. The book is written following a project-based learning approach and covers the major concepts and frequently used commands required to advance readers from a novice to an intermediate level. Basic concepts discussed include: model creation, such as body and joint definitions; analysis type selection, such as static (assembly) analysis, kinematics and dynamics; and results visualization. The concepts are introduced using simple, yet realistic, examples. Verifying the results obtained from computer simulation is extremely important. One of the unique features of this textbook is the incorporation of theoretical discussions for kinematic and dynamic analyses in conjunction with simulation results obtained using Mechanism. The theoretical discussions simply support the verification of simulation results rather than providing an in-depth discussion on the subjects of kinematics and dynamics.

Mechanism Design and Analysis Using PTC Creo Mechanism 9.0

Mechanism Design and Analysis Using PTC Creo Mechanism 9.0
Author: Kuang-Hua Chang
Publisher: SDC Publications
Total Pages: 181
Release:
Genre: Computers
ISBN: 1630575380

• Learn to make your design process more cost effective, reliable, and efficient • Teaches you how to prevent redesign due to design defects • A project-based approach teaches new users how to perform analysis using Creo Mechanism • Covers model creation, analysis type selection, kinematics and dynamics, and results visualization • Incorporates theoretical discussions of kinematic and dynamic analysis with simulation results • Covers the most frequently used commands and concepts of mechanism design and analysis Mechanism Design and Analysis Using PTC Creo Mechanism 9.0 is designed to help you become familiar with Mechanism, a module of the PTC Creo Parametric software family, which supports modeling and analysis (or simulation) of mechanisms in a virtual (computer) environment. Capabilities in Mechanism allow users to simulate and visualize mechanism performance. Using Mechanism early in the product development stage could prevent costly redesign due to design defects found in the physical testing phase; therefore, it contributes to a more cost effective, reliable, and efficient product development process. The book is written following a project-based learning approach and covers the major concepts and frequently used commands required to advance readers from a novice to an intermediate level. Basic concepts discussed include model creation, such as body and joint definitions; analysis type selection, such as static (assembly) analysis, kinematics and dynamics; and results visualization. The concepts are introduced using simple, yet realistic, examples. Verifying the results obtained from computer simulation is extremely important. One of the unique features of this textbook is the incorporation of theoretical discussions for kinematic and dynamic analyses in conjunction with simulation results obtained using Mechanism. The theoretical discussions simply support the verification of simulation results rather than providing an in-depth discussion on the subjects of kinematics and dynamics. Table of Contents 1. Introduction to Mechanism Design 2. A Ball Throwing Example 3. A Spring Mass System 4. A Simple Pendulum 5. A Slider-Crank Mechanism 6. A Compound Spur Gear Train 7. Planetary Gear Train Systems 8. Cam and Follower 9. Assistive Device for Wheelchair Soccer Game 10. Kinematic Analysis for a Racecar Suspension Appendix A: Defining Joints Appendix B: Defining Measures Appendix C: The Default Unit System Appendix D: Functions

Mechanism Design and Analysis Using PTC Creo Mechanism 7.0

Mechanism Design and Analysis Using PTC Creo Mechanism 7.0
Author: Kuang-Hua Chang
Publisher: SDC Publications
Total Pages: 200
Release: 2020-07
Genre: Computers
ISBN: 1630573744

Mechanism Design and Analysis Using PTC Creo Mechanism 7.0 is designed to help you become familiar with Mechanism, a module of the PTC Creo Parametric software family, which supports modeling and analysis (or simulation) of mechanisms in a virtual (computer) environment. Capabilities in Mechanism allow users to simulate and visualize mechanism performance. Using Mechanism early in the product development stage could prevent costly redesign due to design defects found in the physical testing phase; therefore, it contributes to a more cost effective, reliable, and efficient product development process. The book is written following a project-based learning approach and covers the major concepts and frequently used commands required to advance readers from a novice to an intermediate level. Basic concepts discussed include model creation, such as body and joint definitions; analysis type selection, such as static (assembly) analysis, kinematics and dynamics; and results visualization. The concepts are introduced using simple, yet realistic, examples. Verifying the results obtained from computer simulation is extremely important. One of the unique features of this textbook is the incorporation of theoretical discussions for kinematic and dynamic analyses in conjunction with simulation results obtained using Mechanism. The theoretical discussions simply support the verification of simulation results rather than providing an in-depth discussion on the subjects of kinematics and dynamics.

Mechanism Design and Analysis Using PTC Creo Mechanism 3.0

Mechanism Design and Analysis Using PTC Creo Mechanism 3.0
Author: Kuang-Hua Chang
Publisher: SDC Publications
Total Pages: 172
Release: 2015
Genre: Computers
ISBN: 1585039462

Mechanism Design and Analysis Using PTC Creo Mechanism 3.0 is designed to help you become familiar with Mechanism, a module of the PTC Creo Parametric software family, which supports modeling and analysis (or simulation) of mechanisms in a virtual (computer) environment. Capabilities in Mechanism allow users to simulate and visualize mechanism performance. Capabilities in Mechanism allow users to simulate and visualize mechanism performance. Using Mechanism early in the product development stage could prevent costly redesign due to design defects found in the physical testing phase; therefore, contributing to a more cost effective, reliable, and efficient product development process. The book is written following a project-based learning approach and covers the major concepts and frequently used commands required to advance readers from a novice to an intermediate level. Basic concepts discussed include: model creation, such as body and joint definitions; analysis type selection, such as static (assembly) analysis, kinematics and dynamics; and results visualization. The concepts are introduced using simple, yet realistic, examples. Verifying the results obtained from computer simulation is extremely important. One of the unique features of this textbook is the incorporation of theoretical discussions for kinematic and dynamic analyses in conjunction with simulation results obtained using Mechanism. The theoretical discussions simply support the verification of simulation results rather than providing an in-depth discussion on the subjects of kinematics and dynamics.

Mechanism Design and Analysis Using PTC Creo Mechanism 11.0

Mechanism Design and Analysis Using PTC Creo Mechanism 11.0
Author: Kuang-Hua Chang
Publisher: SDC Publications
Total Pages: 181
Release:
Genre: Computers
ISBN: 163057693X

• Learn to make your design process more cost effective, reliable, and efficient • Teaches you how to prevent redesign due to design defects • A project-based approach teaches new users how to perform analysis using Creo Mechanism • Covers model creation, analysis type selection, kinematics and dynamics, and results visualization • Incorporates theoretical discussions of kinematic and dynamic analysis with simulation results • Covers the most frequently used commands and concepts of mechanism design and analysis Mechanism Design and Analysis Using PTC Creo Mechanism 11.0 is designed to help you become familiar with Mechanism, a module of the PTC Creo Parametric software family, which supports modeling and analysis (or simulation) of mechanisms in a virtual (computer) environment. Capabilities in Mechanism allow users to simulate and visualize mechanism performance. Using Mechanism early in the product development stage could prevent costly redesign due to design defects found in the physical testing phase; therefore, it contributes to a more cost effective, reliable, and efficient product development process. The book is written following a project-based learning approach and covers the major concepts and frequently used commands required to advance readers from a novice to an intermediate level. Basic concepts discussed include model creation, such as body and joint definitions; analysis type selection, such as static (assembly) analysis, kinematics and dynamics; and results visualization. The concepts are introduced using simple, yet realistic, examples. Verifying the results obtained from computer simulation is extremely important. One of the unique features of this textbook is the incorporation of theoretical discussions for kinematic and dynamic analyses in conjunction with simulation results obtained using Mechanism. The theoretical discussions simply support the verification of simulation results rather than providing an in-depth discussion on the subjects of kinematics and dynamics.

Mechanism Design and Analysis Using PTC Creo Mechanism 5.0

Mechanism Design and Analysis Using PTC Creo Mechanism 5.0
Author: Kuang-Hua Chang
Publisher: SDC Publications
Total Pages: 180
Release: 2018
Genre: Computers
ISBN: 1630572152

Mechanism Design and Analysis Using PTC Creo Mechanism 5.0 is designed to help you become familiar with Mechanism, a module of the PTC Creo Parametric software family, which supports modeling and analysis (or simulation) of mechanisms in a virtual (computer) environment. Capabilities in Mechanism allow users to simulate and visualize mechanism performance. Using Mechanism early in the product development stage could prevent costly redesign due to design defects found in the physical testing phase; therefore, it contributes to a more cost effective, reliable, and efficient product development process. The book is written following a project-based learning approach and covers the major concepts and frequently used commands required to advance readers from a novice to an intermediate level. Basic concepts discussed include model creation, such as body and joint definitions; analysis type selection, such as static (assembly) analysis, kinematics and dynamics; and results visualization. The concepts are introduced using simple, yet realistic, examples. Verifying the results obtained from computer simulation is extremely important. One of the unique features of this textbook is the incorporation of theoretical discussions for kinematic and dynamic analyses in conjunction with simulation results obtained using Mechanism. The theoretical discussions simply support the verification of simulation results rather than providing an in-depth discussion on the subjects of kinematics and dynamics.

Mechanism Design for Robotics

Mechanism Design for Robotics
Author: Marco Ceccarelli
Publisher: MDPI
Total Pages: 210
Release: 2019-06-21
Genre: Technology & Engineering
ISBN: 3039210580

MEDER 2018, the IFToMM International Symposium on Mechanism Design for Robotics, was the fourth event in a series that was started in 2010 as a specific conference activity on mechanisms for robots. The aim of the MEDER Symposium is to bring researchers, industry professionals, and students together from a broad range of disciplines dealing with mechanisms for robots, in an intimate, collegial, and stimulating environment. In the 2018 MEDER event, we received significant attention regarding this initiative, as can be seen by the fact that the Proceedings contain contributions by authors from all around the world. The Proceedings of the MEDER 2018 Symposium have been published within the Springer book series on MMS, and the book contains 52 papers that have been selected after review for oral presentation. These papers cover several aspects of the wide field of robotics dealing with mechanism aspects in theory, design, numerical evaluations, and applications. This Special Issue of Robotics (https://www.mdpi.com/journal/robotics/special_issues/MDR) has been obtained as a result of a second review process and selection, but all the papers that have been accepted for MEDER 2018 are of very good quality with interesting contents that are suitable for journal publication, and the selection process has been difficult.

Introduction to Mechanism Design

Introduction to Mechanism Design
Author: Eric Constans
Publisher: CRC Press
Total Pages: 760
Release: 2018-07-20
Genre: Technology & Engineering
ISBN: 1351727621

Introduction to Mechanism Design: with Computer Applications provides an updated approach to undergraduate Mechanism Design and Kinematics courses/modules for engineering students. The use of web-based simulations, solid modeling, and software such as MATLAB and Excel is employed to link the design process with the latest software tools for the design and analysis of mechanisms and machines. While a mechanical engineer might brainstorm with a pencil and sketch pad, the final result is developed and communicated through CAD and computational visualizations. This modern approach to mechanical design processes has not been fully integrated in most books, as it is in this new text.

Systems Engineering for the Digital Age

Systems Engineering for the Digital Age
Author: Dinesh Verma
Publisher: John Wiley & Sons
Total Pages: 901
Release: 2023-09-26
Genre: Business & Economics
ISBN: 1394203306

Systems Engineering for the Digital Age Comprehensive resource presenting methods, processes, and tools relating to the digital and model-based transformation from both technical and management views Systems Engineering for the Digital Age: Practitioner Perspectives covers methods and tools that are made possible by the latest developments in computational modeling, descriptive modeling languages, semantic web technologies, and describes how they can be integrated into existing systems engineering practice, how best to manage their use, and how to help train and educate systems engineers of today and the future. This book explains how digital models can be leveraged for enhancing engineering trades, systems risk and maturity, and the design of safe, secure, and resilient systems, providing an update on the methods, processes, and tools to synthesize, analyze, and make decisions in management, mission engineering, and system of systems. Composed of nine chapters, the book covers digital and model-based methods, digital engineering, agile systems engineering, improving system risk, and more, representing the latest insights from research in topics related to systems engineering for complicated and complex systems and system-of-systems. Based on validated research conducted via the Systems Engineering Research Center (SERC), this book provides the reader a set of pragmatic concepts, methods, models, methodologies, and tools to aid the development of digital engineering capability within their organization. Systems Engineering for the Digital Age: Practitioner Perspectives includes information on: Fundamentals of digital engineering, graphical concept of operations, and mission and systems engineering methods Transforming systems engineering through integrating M&S and digital thread, and interactive model centric systems engineering The OODA loop of value creation, digital engineering measures, and model and data verification and validation Digital engineering testbed, transformation, and implications on decision making processes, and architecting tradespace analysis in a digital engineering environment Expedited systems engineering for rapid capability and learning, and agile systems engineering framework Based on results and insights from a research center and providing highly comprehensive coverage of the subject, Systems Engineering for the Digital Age: Practitioner Perspectives is written specifically for practicing engineers, program managers, and enterprise leadership, along with graduate students in related programs of study.