Materials For Tribology
Download Materials For Tribology full books in PDF, epub, and Kindle. Read online free Materials For Tribology ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Author | : William Glaeser |
Publisher | : Elsevier |
Total Pages | : 275 |
Release | : 1992-05-07 |
Genre | : Technology & Engineering |
ISBN | : 008087584X |
This handbook provides an extensive reference source on the materials used in tribological applications. Materials used in tribological applications are, for the most part, common materials used for general engineering applications. Many conventional engineering materials have been adapted to tribological uses and examples of these are given throughout the text. Literature that so far has been scattered and difficult to retrieve is now presented for the first time in this comprehensive treatise. The author has used his expertise in selecting materials for a wide variety of friction and wear applications to develop this data base on materials for tribology. In addition information has been selected from the literature on the behaviour of these materials in bearings, seals, gears, brakes, clutches, wire rope, valves, cams and wear surfaces and is included in the descriptive text. The materials have been grouped in families, relating to their composition. A short table is provided at the beginning of each chapter, listing the ranges of selected properties for the materials under discussion. In addition there are short summaries of the tribological applications this class of materials is used for. On the first page of each chapter one can find a guide for the selection of materials. Sufficient references to the literature are given to enable the reader to follow up in more detail the various topics discussed.
Author | : Hutchings |
Publisher | : Springer |
Total Pages | : 292 |
Release | : 1992 |
Genre | : Technology & Engineering |
ISBN | : |
Tribology covers the fundamentals of tribology and the tribological response of all types of materials, including metals, ceramics, and polymers. The book provides a solid scientific foundation without relying on extensive mathematics, an approach that will allow readers to formulate appropriate solutions when faced with practical problems. Topics considered include fundamentals of surface topography and contact, friction, lubrication, and wear. The book also presents up-to-date discussions on the treatment of wear in the design process, tribological applications of surface engineering, and materials for sliding and rolling bearings. Tribology will be valuable to engineers in the field of tribology, mechanical engineers, physicists, chemists, materials scientists, and students. Features Provides an excellent general introduction to the friction, wear, and lubrication of materials Presents a balanced comparison of the tribological behavior of metals, ceramics, and polymers Includes discussions on tribological applications of surface engineering and materials for sliding and rolling bearings Emphasizes the scientific foundation of tribology Discusses the treatment of wear in the design process Uses SI units throughout and refers to U.S., U.K., and other European standards and material designations
Author | : Sujeet K. Sinha |
Publisher | : Springer Science & Business Media |
Total Pages | : 276 |
Release | : 2013-08-27 |
Genre | : Technology & Engineering |
ISBN | : 3642369359 |
This book brings together recent developments in the areas of MEMS tribology, novel lubricants and coatings for nanotechnological applications, biomimetics in tribology and fundamentals of micro/nano-tribology. Tribology plays important roles in the functioning and durability of machines at small length scales because of the problems associated with strong surface adhesion, friction, wear etc. Recently, a number of studies have been conducted to understand tribological phenomena at nano/micro scales and many new tribological solutions for MEMS have been proposed.
Author | : Y. Yamaguchi |
Publisher | : Elsevier |
Total Pages | : 375 |
Release | : 1990-06-18 |
Genre | : Technology & Engineering |
ISBN | : 0080875807 |
This book presents a thorough overview on workable theories and reliable experimental data on the use of plastic materials for sliding parts.Divided into four parts. Chapters 1 and 2 deal with current theories of friction and wear, and include discussion of various hypotheses based upon experimental studies. Chapter 3 details experiments designed to improve tribological performance via polymer blending and composite production, whilst Chapter 4 explains how the data obtained from these experiemnts can be applied to sliding machine parts. The work will prove useful in the design of plastic materials and components and will also provide a stepping-stone toward future innovations in this field.
Author | : K.-H. Zum Gahr |
Publisher | : Elsevier |
Total Pages | : 571 |
Release | : 1987-03-01 |
Genre | : Science |
ISBN | : 0080875742 |
This new book will be useful not only to practising engineers and scientists, but also to advanced students interested in wear. It reviews our current understanding of the influence of microstructural elements and physical properties of materials (metals, polymers, ceramics and composites) on wear.The introductory chapters describe the relation between microstructure and mechanical properties of materials, surfaces in contact and the classification of wear processes. The following chapters are concerned with wear modes of great practical interest such as grooving wear, sliding wear, rolling-sliding wear and erosive wear. Our present understanding of abrasion, adhesion, surface fatigue and tribochemical reactions as the relevant wear mechanisms is discussed, and new wear models are presented. In addition to extensive experimental results, sketches have been widely used for clarifying the physical events.
Author | : Bikramjit Basu |
Publisher | : John Wiley & Sons |
Total Pages | : 550 |
Release | : 2011-10-07 |
Genre | : Technology & Engineering |
ISBN | : 9781118021651 |
This book helps students and practicing scientists alike understand that a comprehensive knowledge about the friction and wear properties of advanced materials is essential to further design and development of new materials. With important introductory chapters on the fundamentals, processing, and applications of tribology, the book then examines in detail the nature and properties of materials, the friction and wear of structural ceramics, bioceramics, biocomposites, and nanoceramics, as well as lightweight composites and the friction and wear of ceramics in a cryogenic environment.
Author | : Roberto C Dante |
Publisher | : Woodhead Publishing |
Total Pages | : 175 |
Release | : 2015-11-24 |
Genre | : Technology & Engineering |
ISBN | : 0081006209 |
In the past few decades, friction material engineering has become more sophisticated with many tests and techniques to investigate the properties of the materials and their counterparts before, during and after friction occurred. There has not been too much information available on the different raw materials used for friction materials. This book is more focused towards the raw materials that formulate the different friction materials. It explains about their main friction effects and material structure. Handbook of Friction Materials and Their Applications begins by explaining about different friction materials and how they can be used for brakes. It then goes onto explain the tribology of friction materials. Further out it discusses how different friction materials are formulated and produced. Noise and vibration are explained in a further chapter. The later part talks about how different raw materials can be used for friction materials, such as metals, carbon, organic and inorganic materials. - Explains how different friction materials can be used for brakes - Discusses the noise and vibration effects in friction materials - Covers the raw materials that are used in friction materials
Author | : Sujeet K. Sinha |
Publisher | : World Scientific |
Total Pages | : 724 |
Release | : 2009 |
Genre | : Technology & Engineering |
ISBN | : 1848162022 |
This book deals with the new and now-expanding field of friction, wear, and other surface-related mechanical phenomena for polymers. Polymers have been used in various forms such as bulk, films, and composites in applications where their friction, wear resistance, and other surface-related properties have been effectively utilized. There are also many examples in which polymers have performed extremely well, such as in tyres, shoes, brakes, gears, bearings, small moving parts in electronics and MEMS, cosmetics/hair products, and artificial human joints. Around the world, much research is currently being undertaken to develop new polymers, in different forms, for further enhancing tribological performance and for finding novel applications. Keeping in view the importance of tribology of polymers for research and technology as well as the vast literature that is now available in research papers and review articles, this timely book brings together a wealth of research data for an understanding of the basic principles of the subject.
Author | : Klaus Friedrich |
Publisher | : Butterworth-Heinemann |
Total Pages | : 835 |
Release | : 2013-05-14 |
Genre | : Technology & Engineering |
ISBN | : 0444594647 |
Tribology of Polymeric Nanocomposites provides a comprehensive description of polymeric nanocomposites, both as bulk materials and as thin surface coatings, and provides rare, focused coverage of their tribological behavior and potential use in tribological applications. Providing engineers and designers with the preparation techniques, friction and wear mechanisms, property information and evaluation methodology needed to select the right polymeric nanocomposites for the job, this unique book also includes valuable real-world examples of polymeric nanocomposites in action in tribological applications. - Provides a complete reference to polmer nanocomposite material use in tribology from preparation through to selection and use - Explains the theory through examples of real-world applications, keeping this high-level topic practical and accessible - Includes contributions from more than 20 international tribology experts to offer broad yet detailed coverage of this fast-moving field
Author | : Emad Omrani |
Publisher | : CRC Press |
Total Pages | : 243 |
Release | : 2017-11-06 |
Genre | : Technology & Engineering |
ISBN | : 1351650114 |
Tribology and Applications of Self-Lubricating Materials provides insight into the complex mechanisms behind the development of self-lubricating materials, which due to their ability to transfer embedded solid lubricants to the contact surface to decrease wear rate and friction in the absence of an external lubricant, make up an important part of engineering materials used today. This book emphasizes an understanding of the tribological nature of different composites such as metal, polymer, and ceramic matrix composites and discusses the compatibility of these composites with specific lubricants. The book also offers a view of advancements in the development of self-lubricating mechanisms and covers the latest technologies in the field.