Low Noise, Narrow Optical Linewidth Semiconductor-based Optical Comb Source and Low Noise RF Signal Generation

Low Noise, Narrow Optical Linewidth Semiconductor-based Optical Comb Source and Low Noise RF Signal Generation
Author: Ibrahim Tuna Ozdur
Publisher:
Total Pages: 106
Release: 2011
Genre: Mode-locked lasers
ISBN:

Recently optical frequency combs and low noise RF tones are drawing increased attention due to applications in spectroscopy, metrology, arbitrary waveform generation, optical signal processing etc. This thesis focuses on the generation of low noise RF tones and stabilized optical frequency combs. The optical frequency combs are generated by a semiconductor based external cavity mode-locked laser with a high finesse intracavity etalon. In order to get the lowest noise and broadest bandwidth from the mode-locked laser, it is critical to know the free spectral range (FSR) of the etalon precisely. First the etalon FSR is measured by using the modified Pound-Drever-Hall (PDH) based method and obtained a resolution of 1 part in 106, which is 2 order of magnitude better than the standard PDH based method. After optimizing the cavity length, RF driving frequency and PDH cavity locking point, the mode-locked laser had an integrated timing jitter of 3 fs (1 Hz- 100 MHz) which is, to the best of our knowledge, the lowest jitter ever reported from a semiconductor based multigigahertz comb source. The mode-locked laser produces ~ 100 comb lines with 10 GHz spacing, a linewidth of ~500 Hz and 75 dB optical signal-to-noise ratio. The same system can also be driven as a regeneratively mode-locked laser with greatly improved noise performance. Another way of generating a low noise RF tone is using an opto-electronic oscillator which uses an optical cavity as a high Q element. Due to the harmonic nature of OEOs, a mode selection element is necessary. Standard OEOs use an RF filter having drawbacks such as broad pass band, high loss, and high thermal noise. In our work, a novel optoelectronic scheme which uses an optical filter (Fabry-Perot etalon) as the mode filter instead of an RF filter is demonstrated. This method has the advantage of having ultra-narrow filtering bandwidths (~ 10 kHz for a 10 GHz FSR and 106 finesse) and an extremely low noise RF signal. Experimental demonstration of the proposed method resulted in a 5-10 dB decrease of the OEO noise compared to the conventional OEO setup. Also, by modifying the etalon-based OEO, and using single side band modulation, an optically tunable optoelectronic oscillator is achieved with 10-20 dB lower noise than dual side band modulation. Noise properties of the OEO as a function of optical frequency detuning is also analyzed theoretically and the results are in agreement with experimental results. The thesis concludes with comments on future work and directions.

Optical Fiber Telecommunications VII

Optical Fiber Telecommunications VII
Author: Alan Willner
Publisher: Academic Press
Total Pages: 1118
Release: 2019-10-16
Genre: Technology & Engineering
ISBN: 0128163127

With optical fiber telecommunications firmly entrenched in the global information infrastructure, a key question for the future is how deeply will optical communications penetrate and complement other forms of communication (e.g., wireless access, on-premises networks, interconnects, and satellites). Optical Fiber Telecommunications, the seventh edition of the classic series that has chronicled the progress in the research and development of lightwave communications since 1979, examines present and future opportunities by presenting the latest advances on key topics such as: Fiber and 5G-wireless access networks Inter- and intra-data center communications Free-space and quantum communication links Another key issue is the use of advanced photonics manufacturing and electronic signal processing to lower the cost of services and increase the system performance. To address this, the book covers: Foundry and software capabilities for widespread user access to photonic integrated circuits Nano- and microphotonic components Advanced and nonconventional data modulation formats The traditional emphasis of achieving higher data rates and longer transmission distances are also addressed through chapters on space-division-multiplexing, undersea cable systems, and efficient reconfigurable networking. This book is intended as an ideal reference suitable for university and industry researchers, graduate students, optical systems implementers, network operators, managers, and investors. Quotes: "This book series, which owes much of its distinguished history to the late Drs. Kaminow and Li, describes hot and growing applied topics, which include long-distance and wideband systems, data centers, 5G, wireless networks, foundry production of photonic integrated circuits, quantum communications, and AI/deep-learning. These subjects will be highly beneficial for industrial R&D engineers, university teachers and students, and funding agents in the business sector." Prof. Kenichi Iga President (Retired), Tokyo Institute of Technology "With the passing of two luminaries, Ivan Kaminow and Tingye Li, I feared the loss of one of the premier reference books in the field. Happily, this new version comes to chronicle the current state-of-the-art and is written by the next generation of leaders. This is a must-have reference book for anyone working in or trying to understand the field of optical fiber communications technology." Dr. Donald B. Keck Vice President, Corning, Inc. (Retired) "This book is the seventh edition in the definitive series that was previously marshaled by the extraordinary Ivan Kaminow and Tingye Li, both sadly no longer with us. The series has charted the remarkable progress made in the field, and over a billion kilometers of optical fiber currently snake across the globe carrying ever-increasing Internet traffic. Anyone wondering about how we will cope with this incredible growth must read this book." Prof. Sir David Payne Director, Optoelectronics Research Centre, University of Southampton Updated edition presents the latest advances in optical fiber components, systems, subsystems and networks Written by leading authorities from academia and industry Gives a self-contained overview of specific technologies, covering both the state-of-the-art and future research challenges

Femtosecond Optical Frequency Comb: Principle, Operation and Applications

Femtosecond Optical Frequency Comb: Principle, Operation and Applications
Author: Jun Ye
Publisher: Springer Science & Business Media
Total Pages: 373
Release: 2006-06-15
Genre: Science
ISBN: 0387237917

Over the last few years, there has been a convergence between the fields of ultrafast science, nonlinear optics, optical frequency metrology, and precision laser spectroscopy. These fields have been developing largely independently since the birth of the laser, reaching remarkable levels of performance. On the ultrafast frontier, pulses of only a few cycles long have been produced, while in optical spectroscopy, the precision and resolution have reached one part in Although these two achievements appear to be completely disconnected, advances in nonlinear optics provided the essential link between them. The resulting convergence has enabled unprecedented advances in the control of the electric field of the pulses produced by femtosecond mode-locked lasers. The corresponding spectrum consists of a comb of sharp spectral lines with well-defined frequencies. These new techniques and capabilities are generally known as “femtosecond comb technology. ” They have had dramatic impact on the diverse fields of precision measurement and extreme nonlinear optical physics. The historical background for these developments is provided in the Foreword by two of the pioneers of laser spectroscopy, John Hall and Theodor Hänsch. Indeed the developments described in this book were foreshadowed by Hänsch’s early work in the 1970s when he used picosecond pulses to demonstrate the connection between the time and frequency domains in laser spectroscopy. This work complemented the advances in precision laser stabilization developed by Hall.

Nonlinear Photonics

Nonlinear Photonics
Author: Hyatt M. Gibbs
Publisher: Springer Science & Business Media
Total Pages: 218
Release: 2012-12-06
Genre: Science
ISBN: 3642754384

Nonlinear photonics is the name given to the use of nonlinear optical devices for the generation, communication, processing, or analysis of information. This book is a progress report on research into practical applications of such devices. At present, modulation, switching, routing, decision-making, and detection in photonic systems are all done with electronics and linear optoelectronic devices. However, this may soon change, as nonlinear optical devices, e.g. picosecond samplers and switches, begin to complement optoelectonic devices. The authors succinctly summarize past accomplishments in this field and point to hopes for the future, making this an ideal book for newcomers or seasoned researchers wanting to design and perfect nonlinear optical devices and to identify applications in photonic systems.

Silicon Photonics Bloom

Silicon Photonics Bloom
Author: Ozdal Boyraz
Publisher: MDPI
Total Pages: 184
Release: 2021-01-21
Genre: Technology & Engineering
ISBN: 3039369083

The open access journal Micromachines invites manuscript submissions for the Special Issue “Silicon Photonics Bloom”. The past two decades have witnessed a tremendous growth of silicon photonics. Lab-scale research on simple passive component designs is now being expanded by on-chip hybrid systems architectures. With the recent injection of government and private funding, we are living the 1980s of the electronic industry, when the first merchant foundries were established. Soon, we will see more and more merchant foundries proposing well-established electronic design tools, product development kits, and mature component libraries. The open access journal Micromachines invites the submission of manuscripts in the developing area of silicon photonics. The goal of this Special Issue is to highlight the recent developments in this cutting-edge technology.]

Microwave and Wireless Synthesizers

Microwave and Wireless Synthesizers
Author: Ulrich L. Rohde
Publisher: John Wiley & Sons
Total Pages: 818
Release: 2021-04-27
Genre: Technology & Engineering
ISBN: 1119666007

The new edition of the leading resource on designing digital frequency synthesizers from microwave and wireless applications, fully updated to reflect the most modern integrated circuits and semiconductors Microwave and Wireless Synthesizers: Theory and Design, Second Edition, remains the standard text on the subject by providing complete and up-to-date coverage of both practical and theoretical aspects of modern frequency synthesizers and their components. Featuring contributions from leading experts in the field, this classic volume describes loop fundamentals, noise and spurious responses, special loops, loop components, multiloop synthesizers, and more. Practical synthesizer examples illustrate the design of a high-performance hybrid synthesizer and performance measurement techniques—offering readers clear instruction on the various design steps and design rules. The second edition includes extensively revised content throughout, including a modern approach to dealing with the noise and spurious response of loops and updated material on digital signal processing and architectures. Reflecting today's technology, new practical and validated examples cover a combination of analog and digital synthesizers and hybrid systems. Enhanced and expanded chapters discuss implementations of direct digital synthesis (DDS) architectures, the voltage-controlled oscillator (VCO), crystal and other high-Q based oscillators, arbitrary waveform generation, vector signal generation, and other current tools and techniques. Now requiring no additional literature to be useful, this comprehensive, one-stop resource: Provides a fully reviewed, updated, and enhanced presentation of microwave and wireless synthesizers Presents a clear mathematical method for designing oscillators for best noise performance at both RF and microwave frequencies Contains new illustrations, figures, diagrams, and examples Includes extensive appendices to aid in calculating phase noise in free-running oscillators, designing VHF and UHF oscillators with CAD software, using state-of-the-art synthesizer chips, and generating millimeter wave frequencies using the delay line principle Containing numerous designs of proven circuits and more than 500 relevant citations from scientific journal and papers, Microwave and Wireless Synthesizers: Theory and Design, Second Edition, is a must-have reference for engineers working in the field of radio communication, and the perfect textbook for advanced electrical engineering students.

All-fiber Frequency Comb Employing a Single Walled Carbon Nanotube Saturable Absorber for Optical Frequency Metrology in Near Infrared

All-fiber Frequency Comb Employing a Single Walled Carbon Nanotube Saturable Absorber for Optical Frequency Metrology in Near Infrared
Author: Jinkang Lim
Publisher:
Total Pages:
Release: 2011
Genre:
ISBN:

Optical frequency combs produced by mode-locked fiber lasers are useful tools for high precision frequency metrology and molecular spectroscopy in a robust and portable format. We have specifically investigated erbium doped fiber mode-locked lasers that use single-walled carbon nanotubes as a saturable absorber. We have, for the first time, developed and phase- stabilized a carbon nanotube fiber laser (CNFL) frequency comb. The carbon nanotube saturable absorber, which was fabricated using an optically driven deposition method, permits a high repetition frequency (>150 MHz) since an optical nonlinearity of fibers is not used for mode-locking. The CNFL comb combined with a parabolic pulse erbium doped fiber amplifier (EDFA) has shown a compact, robust, and cost-effective supercontinuum source. The amplified pulse from the parabolic pulse EDFA was compressed with a hollow-core photonic bandgap fiber, which produced a wave-breaking-free pulse with an all-fiber set-up. The stabilized comb has demonstrated a fractional instability of 1.2 ©--10[superscript]-11 at 1 sec averaging time, the reference-limited instability. We have performed optical frequency metrology with the CNFL comb and have measured an optical frequency, P(13) which is a molecular overtone transition of C2H2. The measured frequency has shown a good agreement with the known value within an uncertainty of 10 kHz. In order to extend the application of the CNFL comb such as multi-heterodyne dual comb spectroscopy, we have investigated the noise of the CNFL comb and particularly, the broad carrier envelope offset frequency (f[subscript]0) linewidth of the CNFL comb. The primary noise source is shown to be white amplitude noise on the oscillator pump laser combined with the sensitivity of the mode-locked laser to pump power fluctuations. The control bandwidth of f[subscipt]0 was limited by the response dynamics of the CNFL comb. The significant reduction of comb noise has been observed by implementing a phase-lead compensation to extend control bandwidth of the comb and by reducing the pump relative intensity noise simultaneously. Therefore the f[subscipt]0 linewidth has been narrower from 850 kHz to 220 kHz. The integrated phase noise for the f[subscipt]0 lock is 1.6 radians from 100 Hz to 102 kHz.

Science

Science
Author:
Publisher:
Total Pages: 746
Release: 2011
Genre: Science
ISBN: