Large-scale Cryopumping for Controlled Fusion

Large-scale Cryopumping for Controlled Fusion
Author:
Publisher:
Total Pages:
Release: 1977
Genre:
ISBN:

Vacuum pumping by freezing out or otherwise immobilizing the pumped gas is an old concept. In several plasma physics experiments for controlled fusion research, cryopumping has been used to provide clean, ultrahigh vacua. Present day fusion research devices, which rely almost universally upon neutral beams for heating, are high gas throughput systems, the pumping of which is best accomplished by cryopumping in the high mass-flow, moderate-to-high vacuum regime. Cryopumping systems have been developed for neutral beam injection systems on several fusion experiments (HVTS, TFTR) and are being developed for the overall pumping of a large, high-throughput mirror containment experiment (MFTF). In operation, these large cryopumps will require periodic defrosting, some schemes for which are discussed, along with other operational considerations. The development of cryopumps for fusion reactors is begun with the TFTR and MFTF systems. Likely paths for necessary further development for power-producing reactors are also discussed.

Advances in Cryogenic Engineering

Advances in Cryogenic Engineering
Author: K. Timmerhaus
Publisher: Springer Science & Business Media
Total Pages: 765
Release: 2012-12-06
Genre: Science
ISBN: 146134039X

In late 1877, Louis Cailletete in France and Raoul Pictet in Switzerland independently succeeded in liquefying oxygen, thereby proving a hypothesis set forth by Antoine Lavoisier nearly 100 years earlier. The theme of the 1977 Cryogenic Engineering Conference "Cryogenics: A Century of Progress-A Chal lenge for the Future" properly commemorated this accomplishment by reviewing some of the noteworthy advances since that time and outlining many advances still to come. Both Volumes 23 and 24 of this series provide a good account of the many contributions that were presented at this conference. The 1977 Cryogenic Engineering Conference was appropriately again held in Boulder, Colorado where the first Cryogenic Engineering Conference was initiated 23 years ago by the late Russell B. Scott, then Chief of the Cryogenic Engineering Laboratory of the National Bureau of Standards. The Cryogenic Engineering Conference Board is extremely grateful to members of the National Bureau of Standards and the University of Colorado for serving as hosts for this meeting of cryogenic specialists from all over the world. The Cryogenic Engineering Conference is again pleased to have had the International Cryogenic Materials Conference co-host this biennial meeting for the second time in succession. This joint effort again has permitted an in-depth coverage of research on technical materials in areas currently receiving primary attention by the cryogenic engineering community. The Proceedings of the Inter national Cryogenic Materials Conference will be published as Volume 24 of the Advances in Cryogenic Engineering.

Energy

Energy
Author:
Publisher:
Total Pages: 1092
Release: 1980
Genre: Fuel
ISBN:

Advances in Cryogenic Engineering

Advances in Cryogenic Engineering
Author: Peter Kittel
Publisher: Springer Science & Business Media
Total Pages: 2020
Release: 2012-12-06
Genre: Science
ISBN: 1461525225

The Albuquerque Convention Center was the venue for the 1993 Cryogenic Engineering Conference. The meeting was held jointly with the International Cryogenic Materials Conference. Walter F. Stewart, of Los Alamos National Laboratory, was conference chairman. Albuquerque is near Los Alamos National Laboratory which has been a significant contributor to the cryogenics community since the early days of the Manhattan Project. Albuquerque is also the home of the Air Force's Phillips Laboratory which has a lead role in developing cryocoolers. The program consisted of 322 CEC papers, more than a 30% increase from CEC-91 and 20% more than CEC-89. This was the largest number of papers ever submitted to the CEC. Of these, 249 papers are published here, in Volume 39 of Advances in Cryogenic Engineering. Once again the volume is published in two books. This volume includes a cumulative index for the CEC volumes from 1975-1993 (volumes 21,23,25,27,29,31,33,35,37, and 39 of Advances in Cryogenic Engineering). The first 20 volumes are indexed in Volume 20. A companion cumulative index for the ICMC volumes (volumes 22 through 40) appears in Volume 40. This is my first volume as editor. I would not have been able to have done it without the assistance of the many reviewers. Especially appreciated was the instruction manual left me by the previous editor, Ron Fast.

Advances in Cryogenic Engineering

Advances in Cryogenic Engineering
Author: Klaus D. Timmerhaus
Publisher: Springer
Total Pages: 1264
Release: 1982-07
Genre: Gardening
ISBN:

Proceedings of the 1991 Cryogenic Engineering Conference held in Huntsville, Alabama, June 11-14, 1991.