Automatic Instruments and Measuring Systems

Automatic Instruments and Measuring Systems
Author: Rudolf Radnai
Publisher: Elsevier
Total Pages: 181
Release: 2016-02-06
Genre: Technology & Engineering
ISBN: 1483135594
GET BOOK

Jones' Instrument Technology, Volume 5: Automatic Instruments and Measuring Systems deals with general trends in automatic instruments and measuring systems. Specific examples are provided to illustrate the principles of such devices. A brief review of a considerable number of standards is undertaken, with emphasis on the IEC625 Interface System. Other relevant standards are reviewed, including the interface and backplane bus standards. This volume is comprised of seven chapters and begins with a short introduction to the principles of automatic measurements, classification of measuring systems, application areas, and interface systems. The discussion then turns to the connection of the individual units of an IEC-interface-based measuring system, along with control units, computers, programmable calculators, and special system controllers. The chapters that follow focus on the building blocks of automatic measuring systems, their design and assembly, and the merits and uses of IEC system analyzers. The final chapter reviews alternative serial and parallel systems and interfaces, as well as the standards available. This monograph will be invaluable to electronics and electrical engineers.

Instrumentation Systems

Instrumentation Systems
Author: B E Noltingk
Publisher: Elsevier
Total Pages: 197
Release: 2016-02-06
Genre: Technology & Engineering
ISBN: 1483135608
GET BOOK

Jones' Instrument Technology, Volume 4: Instrumentation Systems is an installment of a book series on instrument technology. This volume deals with matters that are most common to all instruments and differs from the previous volumes in terms of length and practical or theoretical content. Chapter 1 gives insights into the types of components and construction used in commercial instrumentation. This chapter also includes topics such as instrument design, construction process, and its mechanical instruments. Chapter 2 discusses instrument's installation and management, along with several important notes. This chapter also includes discussions on instrument piping, cabling, earthing, and testing. In Chapter 3, the topic shifts to why instrument sampling is important, whether it is solid, liquid, gas, or a mix of any of the three. Chapter 4 revolves around the application of electronic signal-processing techniques to transducers and instruments. The next few chapters of this book cover telemetry, display and recording, and pneumatic instrumentation. The last two chapters talk about the reliability and safeness. This book serves as a great reference for people who are interested in learning instrument technology.

TRANSDUCERS AND INSTRUMENTATION

TRANSDUCERS AND INSTRUMENTATION
Author: D. V. S. MURTY
Publisher: PHI Learning Pvt. Ltd.
Total Pages: 741
Release: 2010-04-01
Genre: Technology & Engineering
ISBN: 8120335694
GET BOOK

This well-received and widely adopted text, now in its Second Edition, continues to provide an in-depth analysis of the fundamental principles of Transducers and Instrumentation in a highly accessible style. Professor D.V.S. Murty, who has pioneered the cause of development of Instrumen-tation Engineering in various engineering institutes and universities across the country, compresses his long and rich experience into this volume. He gives a masterly analysis of the principles and characteristics of transducers, common types of industrial sensors and transducers. Besides, he provides a detailed discussion on such topics as signal processing, data display, transmission and telemetry systems, all the while focusing on the latest developments. The text is profusely illustrated with examples and clear-cut diagrams that enhance its value. NEW TO THIS EDITION : To meet the latest syllabi requirements of various universities, three new chapters have been added: CHAPTER 12: Developments in Sensor Technology CHAPTER 13: Sophistication in Instrumentation CHAPTER 14: Process Control Instrumentation Primarily intended as a text for the students pursuing Instrumentation and Control Engineering, this book would also be extremely useful to professional engineers and those working in R&D organisations.

Measurement of Temperature and Chemical Composition

Measurement of Temperature and Chemical Composition
Author: B E Noltingk
Publisher: Butterworth-Heinemann
Total Pages: 193
Release: 2013-10-22
Genre: Technology & Engineering
ISBN: 1483135616
GET BOOK

Measurement of Temperature and Chemical Composition is the second in a four-volume series of Instrument Technology. The first volume grouped the measurements of mechanical quantities. The present volume covers two broad subjects of very wide interest—temperature and chemical composition—both of which are important for process control. The book begins with a discussion of concepts of temperature and other heat-related phenomena. It also describes various instruments for measuring temperature. This is followed by separate chapters on chemical analysis (chromatography, thermal analysis, and polarography); analysis of substances by spectroscopic techniques; electrochemical techniques; gas analysis; and moisture measurement. This book will be a valuable resource in the in the training of technicians, and indeed in the training and understanding of many folk who need to have some knowledge of instrumentation. It also attempts to tread a balanced path between the expounding of fundamental science and the description of trivial practical details.

Information Sources in Energy Technology

Information Sources in Energy Technology
Author: L. J. Anthony
Publisher: Butterworth-Heinemann
Total Pages: 337
Release: 2013-10-22
Genre: Technology & Engineering
ISBN: 1483192334
GET BOOK

Information Sources in Energy Technology presents the major sources in the field of energy technology. The book is comprised of 16 chapters that are organized into three parts. The first part covers energy in general and discusses both local and international agencies that deal with energy technology along with its primary and secondary sources. The next part deals with fuel technology; this part details combustion, steam and boiler plant, electrical energy, and energy conservation. The last part talks about specific energy sources, including nuclear, solar, and geothermal. The text will be of great use to individuals involved in energy industry. Scientists and engineers involved in energy projects will also benefit from the book.