Investigation of Fixed-geometry Supersonic Inlets with Bypass Ducts for Matching Turbojet-engine Air-flow Requirements Over a Range of Transonic and Supersonic Speeds

Investigation of Fixed-geometry Supersonic Inlets with Bypass Ducts for Matching Turbojet-engine Air-flow Requirements Over a Range of Transonic and Supersonic Speeds
Author: Abraham Leiss
Publisher:
Total Pages: 50
Release: 1958
Genre: Aerodynamics, Supersonic
ISBN:

A method is presented to design a supersonic inlet that will match turbojet-engine air mass-flow requirements over a wide Mach number range. Two types of bypasses were investigated; one had a 360 degree annular cowling and the other had twin slotted ducts. Three models were flight tested. Two of the models, which had bypass ducts, were also ground tested. The bypass models had higher external drags. Both bypass models approximated a typical turbojet-engine air mass-flow requirement between Mach numbers 1.0 and 2.0. The flight tests covered a Reynolds number range from 200,000 to 800,000 and a Mach number range from 0.8 to 1.95.

NASA Contractor Report

NASA Contractor Report
Author: United States. National Aeronautics and Space Administration
Publisher:
Total Pages: 1008
Release: 1970
Genre: Aeronautics
ISBN: