Integrative Production Technology for High-Wage Countries

Integrative Production Technology for High-Wage Countries
Author: Christian Brecher
Publisher: Springer Science & Business Media
Total Pages: 1118
Release: 2011-12-19
Genre: Technology & Engineering
ISBN: 364221066X

Industrial production in high-wage countries like Germany is still at risk. Yet, there are many counter-examples in which producing companies dominate their competitors by not only compensating for their specific disadvantages in terms of factor costs (e.g. wages, energy, duties and taxes) but rather by minimising waste using synchronising integrativity as well as by obtaining superior adaptivity on alternating conditions. In order to respond to the issue of economic sustainability of industrial production in high-wage countries, the leading production engineering and material research scientists of RWTH Aachen University together with renowned companies have established the Cluster of Excellence “Integrative Production Technology for High-Wage Countries”. This compendium comprises the cluster’s scientific results as well as a selection of business and technology cases, in which these results have been successfully implemented into industrial practice in close cooperation with more than 30 companies of the industrial production sector.

Handbook of Quality Integrated Circuit Manufacturing

Handbook of Quality Integrated Circuit Manufacturing
Author: Robert Zorich
Publisher: Academic Press
Total Pages: 604
Release: 2012-12-02
Genre: Technology & Engineering
ISBN: 0323140556

Here is a comprehensive practical guide to entire wafer fabrication process from A to Z. Written by a practicing process engineer with years of experience, this book provides a thorough introduction to the complex field of IC manufacturing, including wafer area layout and design, yield optimization, just-in-time management systems, statistical quality control, fabrication equipment and its setup, and cleanroom techniques. In addition, it contains a wealth of information on common process problems: How to detect them, how to confirm them, and how to solve them. Whether you are a new enginner or technician just entering the field, a fabrication manager looking for ways to improve quality and production, or someone who would just like to know more about IC manufacturing, this is the book you're looking for. - Provides a readable, practical overview of the entire wafer fabrication process for new engineers and those just entering this complex field - Enables engineers and managers to improve production, raise quality levels, and solve problems that commonly occur in the fabrication process - Presents the latest techniques and gives special attention to Japanese IC manufacturing techniques, showing how they obtain outstanding quality

Ground Support Technology for Highly Stressed Excavations

Ground Support Technology for Highly Stressed Excavations
Author: Ernesto Villaescusa
Publisher: CRC Press
Total Pages: 442
Release: 2023-04-21
Genre: Technology & Engineering
ISBN: 1000835227

The performance of ground support as a scheme is essential to constrain failures occurring at the rock surfaces of deep or highly stressed excavations. This book covers laboratory and theoretical developments coupled with field experiments and observations with the implementation of the methodology at mines. It explains the energy dissipation capabilities of reinforcement and support systems leading to the design of complete ground support schemes that can maintain integrity following the dynamic ejection of a mass of rock from an excavation boundary. The key features of the book are as follows: It explores the mechanics, demand and capacity of ground support technology It covers the whole gamut of theories, laboratory and field test results and case studies related to ground support technology It includes a comprehensive database of mesh, rock bolts, cable bolts and shotcrete capacity It examines ground support scheme testing and explanation It discusses comprehensive case studies, including de-stress blasting This book is aimed at professionals in mining engineering, including civil engineering, geological engineering and geotechnical engineering, and related advanced postgraduate studies.

Computer Integrated Manufacturing

Computer Integrated Manufacturing
Author: ALAN WEATHERALL
Publisher: Elsevier
Total Pages: 336
Release: 2013-10-22
Genre: Technology & Engineering
ISBN: 1483291979

This book will give a competitive edge to students of manufacturing, managers in industry, and anyone involved in specifying, implementing and using CIM systems.

Unsettled Technology Domains in Aerospace Additive Manufacturing Concerning Safety, Airworthiness, and Certification

Unsettled Technology Domains in Aerospace Additive Manufacturing Concerning Safety, Airworthiness, and Certification
Author: Jody Muelaner
Publisher: SAE International
Total Pages: 29
Release: 2019-12-23
Genre: Technology & Engineering
ISBN: 1468601199

Additive manufacturing (AM) is currently being used to produce many certified aerospace components. However, significant advantages of AM are not exploited due to unresolved issues associated with process control, feedstock materials, surface finish, inspection, and cost. Components subject to fatigue must undergo surface finish improvements to enable inspection. This adds cost and limits the use of topology optimization. Continued development of process models is also required to enable optimization and understand the potential for defects in thin-walled and slender sections. Costs are high for powder-fed processes due to material costs, machine costs, and low deposition rates. Costs for wire-fed processes are high due to the extensive postprocess machining required. In addition, these processes are limited to low-complexity features. Incremental improvements in all of these areas are being made, but a step change could potentially be achieved by hybrid processes, which use wire feedstock to deposit the bulk of the part and powder for fine detail. NOTE: SAE EDGE™ Research Reports are intended to identify and illuminate key issues in emerging, but still unsettled, technologies of interest to the mobility industry. The goal of SAE EDGE™ Research Reports is to stimulate discussion and work in the hope of promoting and speeding resolution of identified issues. SAE EDGE™ Research Reports are not intended to resolve the issues they identify or close any topic to further scrutiny. Click here to access the full SAE EDGETM Research Report portfolio. https://doi.org/10.4271/EPR2019008

DeGarmo's Materials and Processes in Manufacturing

DeGarmo's Materials and Processes in Manufacturing
Author: J. T. Black
Publisher: John Wiley & Sons
Total Pages: 902
Release: 2020-07-21
Genre: Technology & Engineering
ISBN: 1119723299

Guiding engineering and technology students for over five decades, DeGarmo's Materials and Processes in Manufacturing provides a comprehensive introduction to manufacturing materials, systems, and processes. Coverage of materials focuses on properties and behavior, favoring a practical approach over complex mathematics; analytical equations and mathematical models are only presented when they strengthen comprehension and provide clarity. Material production processes are examined in the context of practical application to promote efficient understanding of basic principles, and broad coverage of manufacturing processes illustrates the mechanisms of each while exploring their respective advantages and limitations. Aiming for both accessibility and completeness, this text offers introductory students a comprehensive guide to material behavior and selection, measurement and inspection, machining, fabrication, molding, fastening, and other important processes using plastics, ceramics, composites, and ferrous and nonferrous metals and alloys. This extensive overview of the field gives students a solid foundation for advanced study in any area of engineering, manufacturing, and technology.

Van der Waals Heterostructures

Van der Waals Heterostructures
Author: Zhuo Kang
Publisher: John Wiley & Sons
Total Pages: 340
Release: 2022-12-02
Genre: Technology & Engineering
ISBN: 3527833870

Van der Waals Heterostructures A comprehensive resource systematically detailing the developments and applications of van der Waals heterostructures and devices Van der Waals Heterostructures is essential reading to understand the developments made in van der Waals heterostructures and devices in all aspects, from basic synthesis to physical analysis and heterostructures assembling to devices applications, including demonstrated applications of van der Waals heterostructure on electronics, optoelectronics, and energy conversion, such as solar energy, hydrogen energy, batteries, catalysts, biotechnology, and more. This book starts from an in-depth introduction of van der Waals interactions in layered materials and the forming of mixed-dimensional heterostructures via van der Waals force. It then comprehensively summarizes the synthetic methods, devices building processes and physical mechanism of 2D van der Waals heterostructures, and devices including 2D-2D electronics, 2D-2D optoelectronics, and mixed dimensional van der Waals heterostructures. In Van der Waals Heterostructures, readers can expect to find specific information on: The current library of 2D semiconductors and the current synthesis and performances of 2D semiconductors Controllable synthesis and assemble van der Waals heterostructures, physics of the van der Waals interface, and multi-field coupling effects 2D-2D electronics, 2D-2D optoelectronics, mixed dimensional van der Waals heterostructures, and van der Waals heterostructure applications on energy conversion Insight into future perspectives of the van der Waals heterostructures and devices with the detailed effective role of 2D materials for integrated electrical and electronic equipment