Heat Transfer and Fluid Flow in Minichannels and Microchannels

Heat Transfer and Fluid Flow in Minichannels and Microchannels
Author: Satish Kandlikar
Publisher: Elsevier
Total Pages: 492
Release: 2006
Genre: Science
ISBN: 9780080445274

&Quot;This book explores flow through passages with hydraulic diameters from about 1 [mu]m to 3 mm, covering the range of minichannels and microchannels. Design equations along with solved examples and practice problems are also included to serve the needs of practicing engineers and students in a graduate course."--BOOK JACKET.

Instability in Flow Boiling in Microchannels

Instability in Flow Boiling in Microchannels
Author: Sujoy Kumar Saha
Publisher: Springer
Total Pages: 63
Release: 2015-09-14
Genre: Science
ISBN: 3319234315

This Brief addresses the phenomena of instability in flow boiling in microchannels occurring in high heat flux electronic cooling. A companion edition in the SpringerBrief Subseries on Thermal Engineering and Applied Science to “Critical Heat Flux in Flow Boiling in Microchannels,” and "Heat Transfer and Pressure Drop in Flow Boiling in Microchannels,"by the same author team, this volume is idea for professionals, researchers, and graduate students concerned with electronic cooling.

Dynamics and Control of Energy Systems

Dynamics and Control of Energy Systems
Author: Achintya Mukhopadhyay
Publisher: Springer Nature
Total Pages: 526
Release: 2019-10-14
Genre: Technology & Engineering
ISBN: 9811505365

This book presents recent advances in dynamics and control of different types of energy systems. It covers research on dynamics and control in energy systems from different aspects, namely, combustion, multiphase flow, nuclear, chemical and thermal. The chapters start from the basic concepts so that this book can be useful even for researchers with very little background in the area. A dedicated chapter provides an overview on the fundamental aspects of the dynamical systems approach. The book will be of use to researchers and professionals alike.

Handbook of Phase Change

Handbook of Phase Change
Author: S.G. Kandlikar
Publisher: Routledge
Total Pages: 786
Release: 2019-01-22
Genre: Science
ISBN: 1351442198

Provides a comprehensive coverage of the basic phenomena. It contains twenty-five chapters which cover different aspects of boiling and condensation. First the specific topic or phenomenon is described, followed by a brief survey of previous work, a phenomenological model based on current understanding, and finally a set of recommended design equa

Enhanced Boiling Heat Transfer

Enhanced Boiling Heat Transfer
Author: John R. Thome
Publisher: CRC Press
Total Pages: 220
Release: 1990-01-01
Genre: Technology & Engineering
ISBN: 9780891167457

This is a comprehensive survey of boiling heat transfer augmentation, one of the most dynamic areas in the field. The text covers fundamental aspects of boiling augmentation and provides an in-depth treatment of enhanced boiling surface applications in industry.

Handbook of Thermal Science and Engineering

Handbook of Thermal Science and Engineering
Author:
Publisher: Springer
Total Pages: 0
Release: 2018-07-31
Genre: Science
ISBN: 9783319266947

This Handbook provides researchers, faculty, design engineers in industrial R&D, and practicing engineers in the field concise treatments of advanced and more-recently established topics in thermal science and engineering, with an important emphasis on micro- and nanosystems, not covered in earlier references on applied thermal science, heat transfer or relevant aspects of mechanical/chemical engineering. Major sections address new developments in heat transfer, transport phenomena, single- and multiphase flows with energy transfer, thermal-bioengineering, thermal radiation, combined mode heat transfer, coupled heat and mass transfer, and energy systems. Energy transport at the macro-scale and micro/nano-scales is also included. The internationally recognized team of authors adopt a consistent and systematic approach and writing style, including ample cross reference among topics, offering readers a user-friendly knowledgebase greater than the sum of its parts, perfect for frequent consultation. The Handbook of Thermal Science and Engineering is ideal for academic and professional readers in the traditional and emerging areas of mechanical engineering, chemical engineering, aerospace engineering, bioengineering, electronics fabrication, energy, and manufacturing concerned with the influence thermal phenomena.

Encyclopedia Of Two-phase Heat Transfer And Flow Iv: Modeling Methodologies, Boiling Of Co2, And Micro-two-phase Cooling (A 4-volume Set)

Encyclopedia Of Two-phase Heat Transfer And Flow Iv: Modeling Methodologies, Boiling Of Co2, And Micro-two-phase Cooling (A 4-volume Set)
Author: John R Thome
Publisher: World Scientific Publishing
Total Pages: 1353
Release: 2018-05-15
Genre: Technology & Engineering
ISBN: 9813234385

Set IV is a new addition to the previous Sets I, II and III. It contains 23 invited chapters from international specialists on the topics of numerical modeling of pulsating heat pipes and of slug flows with evaporation; lattice Boltzmann modeling of pool boiling; fundamentals of boiling in microchannels and microfin tubes, CO2 and nanofluids; testing and modeling of micro-two-phase cooling systems for electronics; and various special topics (flow separation in microfluidics, two-phase sensors, wetting of anisotropic surfaces, ultra-compact heat exchangers, etc.). The invited authors are leading university researchers and well-known engineers from leading corporate research laboratories (ABB, IBM, Nokia Bell Labs). Numerous 'must read' chapters are also included here for the two-phase community. Set IV constitutes a 'must have' engineering and research reference together with previous Sets I, II and III for thermal engineering researchers and practitioners.

Convective Boiling and Condensation

Convective Boiling and Condensation
Author: John G. Collier
Publisher: Clarendon Press
Total Pages: 646
Release: 1994-05-19
Genre:
ISBN: 0191591262

* Third edition of a well-known and well established text both in industry and for teaching * Fully up-to-date and includes extra problems This book is an aid to heat exchanger design written primarily for design and development engineers in the chemical process, power generation, and refrigeration industries. It provides a comprehensive reference on two-phase flows, boiling, and condensation. The text covers all the latest advances like flows over tube bundles and two-phase heat transfer regarding refrigerants and petrochemicals. Another feature of this third edition is many new problems at chapter ends to enhance its use as a teaching text for graduate and post-graduate courses on two-phase flow and heat transfer. - ;This book is written for practising engineers as a comprehensive reference on two-phase flows, boiling, and condensation. It deals with methods for estimating two-phase flow pressure drops and heat transfer rates. It is a well-known reference book in its third edition and is also used as a text for advanced university courses. Both authors write from practical experience as both are professional engineers. -

Laminar Flow Forced Convection in Ducts

Laminar Flow Forced Convection in Ducts
Author: R. K. Shah
Publisher: Academic Press
Total Pages: 492
Release: 2014-06-28
Genre: Technology & Engineering
ISBN: 1483191303

Laminar Flow Forced Convection in Ducts is a sourcebook for compact heat exchanger analytical data. This book describes the analytical solutions for laminar fluid flow and forced convection heat transfer in circular and noncircular pipes, including applicable differential equations and boundary conditions involving velocity and temperature problems of fluid flow. The book also discusses fluid flow—how much power is required to pump fluids through the heat exchanger, as well as the heat transfer—the determination of q" distribution, and the temperature of fluid and walls. The text also analyzes the coolant or heat transfer fluid flows in a nuclear power reactor composed of a bundle of circular section fuel rods located inside a round tube. R.A. Axford addresses fluid flow and heat transfers results for the rod bundle geometry in "Heat Transfer in Rod Bundles." The book also provides an overview and guidelines that can be used for the designer and the applied mathematician. This book is suitable for engineers working in electronics, aerospace, instrumentation, and biomechanics that use cooling or heating exchanges or solar collection systems.

Two-Phase Flow, Boiling, and Condensation

Two-Phase Flow, Boiling, and Condensation
Author: S. Mostafa Ghiaasiaan
Publisher: Cambridge University Press
Total Pages: 0
Release: 2014-08-07
Genre: Technology & Engineering
ISBN: 9781107431638

This text is an introduction to gas-liquid two-phase flow, boiling and condensation for graduate students, professionals, and researchers in mechanical, nuclear, and chemical engineering. The book provides a balanced coverage of two-phase flow and phase change fundamentals, well-established art and science dealing with conventional systems, and the rapidly developing areas of microchannel flow and heat transfer. It is based on the author's more than 15 years of teaching experience. Instructors teaching multiphase flow have had to rely on a multitude of books and reference materials. This book remedies that problem by covering all the topics that are essential for a graduate first course. Among the important areas that are discussed in the book, and are not adequately covered by virtually all the available textbooks, are: two-phase flow model conservation equations and their numerical solution; condensation with and without noncondensables; and two-phase flow, boiling, and condensation in mini and microchannels.