Innovative Ae And Ndt Techniques For On Site Measurement Of Concrete And Masonry Structures

Download Innovative Ae And Ndt Techniques For On Site Measurement Of Concrete And Masonry Structures full books in PDF, epub, and Kindle. Read online free Innovative Ae And Ndt Techniques For On Site Measurement Of Concrete And Masonry Structures ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!

Innovative AE and NDT Techniques for On-Site Measurement of Concrete and Masonry Structures

Author	: Masayasu Ohtsu
Publisher	: Springer
Total Pages	: 185
Release	: 2016-05-26
Genre	: Technology & Engineering
ISBN	: 9401776067

GET BOOK

The research and its outcomes presented in this book treat applications of NDT techniques to on-site measurements. These on-site measurements have been marginally successful as each technique requires a particular analysis. In this regard, visualization and imaging of results are in great demand for practitioners and engineers for inspection. This volume, in which on-site measurements of concrete and masonry structures by NDT techniques are comprehensively summarized, focuses on the visualization procedure of the results measured. The book will therefore be of great value to the field.

Acoustic Emission Testing

Author	: Christian U. Grosse
Publisher	: Springer Nature
Total Pages	: 752
Release	: 2021-07-14
Genre	: Technology & Engineering
ISBN	: 3030679365

GET BOOK

This book provides an introduction to Acoustic Emission Testing and its applications to different materials like concrete, steel, ceramics, geotechnical materials, polymers, biological structures and wood. Acoustic Emission Techniques (AET) techniques have been studied in engineering for a long time. The techniques are applied more and more to practical investigations and are more and more standardized in codes. This is because the degradation of structures due to ageing urgently demand for maintenance and rehabilitation of structures in service. It results in the need for the development of advanced and efficient inspection techniques. In mechanical engineering and concerning the monitoring of machines and mechanical components, AE is a widely accepted observing deterioration in the frame of structural health monitoring. The advantages of AE like sensitivity, damage localization potential, non-intrusive nature as well as developments in signal analysis and data transmission allow applications that could not be considered decades ago. As such, AE techniques draw great attention to diagnostic applications and in material testing. This book covers all levels from the description of AE basics for AE beginners (level of a student) to sophisticated AE algorithms and applications to real large-scale structures as well as the observation of the cracking process in laboratory specimen to study fracture processes. This book has proved its worth over the past twelve years. Now in its second edition, it will be a resource that sets the standard and equips readers for the future. All chapters from the 1st edition have been updated and rewritten and eight extra chapters (e.g also regarding AE tomography, AE in plate-like structures and AE for investigations of hardening of fresh concrete) have been added.

Acoustic Emission and Related Non-destructive Evaluation Techniques in the Fracture Mechanics of Concrete

Author	: Masayasu Ohtsu
Publisher	: Woodhead Publishing
Total Pages	: 332
Release	: 2020-10-01
Genre	: Technology & Engineering
ISBN	: 0128235144

GET BOOK

Acoustic Emission and Related Non-destructive Evaluation Techniques in the Fracture Mechanics of Concrete: Fundamentals and Applications, Second Edition presents innovative Acoustic Emission (AE) and related non-destructive evaluation (NDE) techniques that are used for damage detection and inspection of aged and deteriorated concrete structures. This new edition includes multi-modal applications such as DIC, thermography, X-ray and in-situ implementations, all of which are helpful in better understanding feasibility and underlying challenges. This new edition is an essential resource for civil engineers, contractors working in construction, and materials scientists working both in industry and academia. - Completely updated, with a new chapter on multi-technique damage monitoring - Presents new applications and novel technologies on AE and related NDT in the fracture mechanics of concrete - Features contributions from recognized world-leaders in the application of acoustic emission (AE) and NDE techniques used for the damage assessment of concrete and concrete structures

Advanced Techniques for Testing of Cement-Based Materials

Author	: Marijana Serdar
Publisher	: Springer Nature
Total Pages	: 246
Release	: 2020-02-18
Genre	: Technology & Engineering
ISBN	: 3030397386

GET BOOK

The book examines advanced, non-standardized techniques that have been developed for determining different properties of cement paste, mortar and concrete, and provides state-of-the-art information on methods for monitoring hydration-induced changes in cement-based materials (CBMs). These methods are often nondestructive and allow quasi-continuous monitoring covering the time span from placement of the material to formation of a fully hardened cement composite. The book also presents various applications of acoustic emission for characterizing fresh concrete, recent developments in ultrasonic methods for characterizing CBMs since placement, application of ambient response methods for measuring elastic modulus, methods for determining deformational characteristics of CBMs since setting and methods for in situ measurements of stresses in concrete elements during hardening.

Elasticity of Materials

Author	: Ezgi Günay
Publisher	: BoD – Books on Demand
Total Pages	: 107
Release	: 2019-01-30
Genre	: Technology & Engineering
ISBN	: 1789849276

GET BOOK

In the science of physics, elasticity is the ability of a deformable body (e.g., steel, aluminum, rubber, wood, crystals, etc.) to resist a distorting effect and to return to its original size and shape when that influence or force is removed. Solid bodies will deform when satisfying forces are applied to them. Elasticity solution of materials will be grouped in forms of linear and nonlinear elasticity formulations. The main subject of this book is engineering elasticity and consists of five chapters in two main sections. These two main sections are "General Theorems in Elasticity" and "Engineering Applications in Theory of Elasticity." The first chapter of the first section belongs to the editor and is entitled "Analytical and Numerical Approaches in Engineering Elasticity." The second chapter in the first section is entitled "A General Overview of Stress-Strain Analysis for the Elasticity Equations" by P. Kumar, M. Mahanty, and A. Chattopadhyay. The first chapter of the second section is entitled "FEA and Experimental Determination of Applied Elasticity Problems for Fabricating Aspheric Surfaces" by Dr. D.N. Nguyen. The second chapter is entitled "Concept of Phase Transition Based on Elastic Systematics" by Dr. P.S. Nnamchi and Dr. C.S. Obayi. The third chapter is entitled "Repair Inspection Technique Based on Elastic-Wave Tomography Applied for Deteriorated Concrete Structures" by Dr. K. Hashimoto, Dr. T. Shiotani, Dr. T. Nishida, and Dr. N. Okude. Finally, this book includes the basic principles of elasticity and related engineering applications about theory and design.

Structural Health Monitoring of Large Structures Using Acoustic Emission–Case Histories

Author	: Kanji Ono
Publisher	: MDPI
Total Pages	: 298
Release	: 2020-11-23
Genre	: Technology & Engineering
ISBN	: 3039284746

GET BOOK

Acoustic emission (AE) techniques have successfully been used for assuring the structural integrity of large rocket motorcases since 1963, and their uses have expanded to ever larger structures, especially as structural health monitoring (SHM) of large structures has become the most urgent task for engineering communities around the world. The needs for advanced AE monitoring methods are felt keenly by those dealing with aging infrastructures. Many publications have appeared covering various aspects of AE techniques, but documentation of actual applications of AE techniques has been mostly limited to reports of successful results without technical details that allow objective evaluation of the results. There are some exceptions in the literature. In this Special Issue of the Acoustics section of Applied Sciences, we seek contributions covering these exceptions cited here. Here, we seek contributions describing case histories of AE applications to large structures that have achieved the goals of SHM by providing adequate technical information supporting the success stories. Types of structures can include aerospace and geological structures, bridges, buildings, factories, maritime facilities, off-shore structures, etc. Experiences with AE monitoring methods designed and proven for large stru

Handbook of Materials Failure Analysis With Case Studies from the Construction Industries

Author	: Abdel Salam Hamdy Makhlouf
Publisher	: Butterworth-Heinemann
Total Pages	: 374
Release	: 2018-04-27
Genre	: Technology & Engineering
ISBN	: 0081019297

GET BOOK

Handbook of Materials Failure Analysis: With Case Studies from the Construction Industry provides a thorough understanding of the reasons materials fail in certain situations, covering important scenarios including material defects, mechanical failure due to various causes, and improper material selection and/or corrosive environment. The book begins with a general overview of materials failure analysis and its importance, and then logically proceeds from a discussion of the failure analysis process, types of failure analysis, and specific tools and techniques, to chapters on analysis of materials failure from various causes. Failure can occur for several reasons, including: materials defects-related failure, materials design-related failure, or corrosion-related failures. The suitability of the materials to work in a definite environment is an important issue. The results of these failures can be catastrophic in the worst case scenarios, causing loss of life. This important reference covers the most common types of materials failure, and provides possible solutions. - Provides the most up-to-date and balanced coverage of failure analysis, combining foundational knowledge and current research on the latest developments and innovations in the field - Offers an ideal accompaniment for those interested in materials forensic investigation, failure of materials, static failure analysis, dynamic failure analysis, and fatigue life prediction - Presents compelling new case studies from key industries to demonstrate concepts and to assist users in avoiding costly errors that could result in catastrophic events

Nondestructive Testing and Evaluation of Fiber-Reinforced Composite Structures

Author	: Shuncong Zhong
Publisher	: Springer Nature
Total Pages	: 431
Release	: 2022-04-01
Genre	: Technology & Engineering
ISBN	: 9811908486

GET BOOK

This book presents a detailed description of the most common nondestructive testing(NDT) techniques used for the testing and evaluation fiber-reinforced composite structures, during manufacturing and/or in service stages. In order to facilitate the understanding and the utility of the different NDT techniques presented, the book first provides some information regarding the defects and material degradation mechanisms observed in fiber-reinforced composite structures as well as their general description and most probable causes. It is written based on the extensive scientific research and engineering backgrounds of the authors in the NDT and structural health monitoring (SHM) of structural systems from various areas including electrical, mechanical, materials, civil and biomedical engineering. Pursuing a rigorous approach, the book establishes a fundamental framework for the NDT of fiber-reinforced composite structures, while emphasizing on the importance of technique’s spatial resolution, integrated systems analysis and the significance of the influence stemming from the applicability of the NDT and the physical parameters of the test structures in the selection and utilization of adequate NDT techniques. The book is intended for students who are interested in the NDT of fiber-reinforced composite structures, researchers investigating the applicability of different NDT techniques to the inspections of structural systems, and NDT researchers and engineers working on the optimization of NDT systems for specific applications involving the use of fiber-reinforced composite structures.

Bridge Safety, Maintenance, Management, Life-Cycle, Resilience and Sustainability

Author	: Joan Ramon Casas
Publisher	: CRC Press
Total Pages	: 2646
Release	: 2022-06-27
Genre	: Technology & Engineering
ISBN	: 1000798739

GET BOOK

Bridge Safety, Maintenance, Management, Life-Cycle, Resilience and Sustainability contains lectures and papers presented at the Eleventh International Conference on Bridge Maintenance, Safety and Management (IABMAS 2022, Barcelona, Spain, 11–15 July, 2022). This e-book contains the full papers of 322 contributions presented at IABMAS 2022, including the T.Y. Lin Lecture, 4 Keynote Lectures, and 317 technical papers from 36 countries all around the world. The contributions deal with the state-of-the-art as well as emerging concepts and innovative applications related to the main aspects of safety, maintenance, management, life-cycle, resilience, sustainability and technological innovations of bridges. Major topics include: advanced bridge design, construction and maintenance approaches, safety, reliability and risk evaluation, life-cycle management, life-cycle, resilience, sustainability, standardization, analytical models, bridge management systems, service life prediction, structural health monitoring, non-destructive testing and field testing, robustness and redundancy, durability enhancement, repair and rehabilitation, fatigue and corrosion, extreme loads, needs of bridge owners, whole life costing and investment for the future, financial planning and application of information and computer technology, big data analysis and artificial intelligence for bridges, among others. This volume provides both an up-to-date overview of the field of bridge engineering and significant contributions to the process of making more rational decisions on bridge safety, maintenance, management, life-cycle, resilience and sustainability of bridges for the purpose of enhancing the welfare of society. The volume serves as a valuable reference to all concerned with and/or involved in bridge structure and infrastructure systems, including students, researchers and practitioners from all areas of bridge engineering.

Sustainable Building Materials and Construction

Author	: B. Kondraivendhan
Publisher	: Springer Nature
Total Pages	: 429
Release	: 2022-05-13
Genre	: Technology & Engineering
ISBN	: 9811684960

GET BOOK

This book presents the select proceedings of the International Conference on Sustainable Building Materials and Construction (ICSBMC 2021), and examines a range of durable, energy-efficient, advance construction and building materials produced from industrial wastes and byproducts. The topics covered include advanced construction materials, durability of concrete structures, waste utilization, repair & rehabilitation of concrete structures, structural analysis & design, composites, nanomaterials and smart materials in seismic engineering. The book also discusses various properties and performance attributes of modern-age concretes including their strength, durability, workability, and carbon footprint. This book will be a precious reference for beginners, researchers, and professionals interested in sustainable construction and allied fields.