Parametric and Feature-Based CAD/CAM

Parametric and Feature-Based CAD/CAM
Author: Jami J. Shah
Publisher: John Wiley & Sons
Total Pages: 646
Release: 1995-11-03
Genre: Computers
ISBN: 9780471002147

The book is the complete introduction and applications guide to this new technology. This book introduces the reader to features and gives an overview of geometric modeling techniques, discusses the conceptual development of features as modeling entities, illustrates the use of features for a variety of engineering design applications, and develops a set of broad functional requirements and addresses high level design issues.

Masters Theses in the Pure and Applied Sciences

Masters Theses in the Pure and Applied Sciences
Author: Wade H. Shafer
Publisher: Springer Science & Business Media
Total Pages: 421
Release: 2012-12-06
Genre: Science
ISBN: 1461534747

Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 34 (thesis year 1989) a total of 13,377 theses titles from 26 Canadian and 184 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 34 reports theses submitted in 1989, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.

Geometric Modelling

Geometric Modelling
Author: Gerald Farin
Publisher: Springer Science & Business Media
Total Pages: 317
Release: 2012-12-06
Genre: Computers
ISBN: 370916916X

In this volume experts from university and industry are presenting new technologies for solving industrial problems as well as important and practicable impulses for new research. The following topics are treated: - solid modelling - geometry processing - feature modelling - product modelling - surfaces over arbitrary topologies - blending methods - scattered data algorithms - smooting and fairing algorithms - NURBS 21 articles are giving a state-of-the-art survey of the relevant problems and issues in the rapidly growing area of geometric modelling.

Advanced CAD/CAM Systems

Advanced CAD/CAM Systems
Author: René Soenen
Publisher: Springer
Total Pages: 273
Release: 2016-01-09
Genre: Technology & Engineering
ISBN: 0387348344

This book provides up-to-date information about the promising use of feature technology for integrating computer-aided-design with subsequent applications. The book consists of 20 articles based upon the international IFIP conference on this topic held in Valenciennes, France in May 1994.

Virtual Modelling and Rapid Manufacturing

Virtual Modelling and Rapid Manufacturing
Author: Paulo Jorge da Silva Bartolo
Publisher: CRC Press
Total Pages: 656
Release: 2005-09-15
Genre: Technology & Engineering
ISBN: 9780415390620

Virtual Modelling and Rapid Manufacturing presents essential research in the area of Virtual and Rapid Prototyping. It contains reviewed papers that were presented at the 2nd International Conference on Advanced Research in Virtual and Rapid Prototyping, held at the School of Technology and Management of the Polytechnic Institute of Leiria, Portugal, from September 28 to October 1, 2005. The volume covers a wide range of topical subjects, such as medical imaging, reverse engineering, virtual reality and prototyping, biomanufacturing and tissue engineering, advanced rapid prototyping technologies and micro-fabrication, biomimetics and materials, and concurrent engineering

Computer-Aided Injection Mold Design and Manufacture

Computer-Aided Injection Mold Design and Manufacture
Author: J.Y.H. Fuh
Publisher: CRC Press
Total Pages: 396
Release: 2004-08-02
Genre: Technology & Engineering
ISBN: 9780824753146

Examining processes that affect more than 70 percent of consumer products ranging from computers to medical devices and automobiles, this reference presents the latest research in automated plastic injection and die casting mold design and manufacture. It analyzes many industrial examples and methodologies while focusing on the algorithms, implementation procedures, and system architectures that will lead to a fully automated or semi-automated computer-aided injection mold design system (CADIMDS). This invaluable guide in this challenging area of precision engineering summarizes key findings and innovations from the authors' many years of research on intelligent mold design technologies.

PC Mag

PC Mag
Author:
Publisher:
Total Pages: 484
Release: 1994-10-25
Genre:
ISBN:

PCMag.com is a leading authority on technology, delivering Labs-based, independent reviews of the latest products and services. Our expert industry analysis and practical solutions help you make better buying decisions and get more from technology.

Integrated Design and Manufacturing in Mechanical Engineering

Integrated Design and Manufacturing in Mechanical Engineering
Author: Patrick Chedmail
Publisher: Springer Science & Business Media
Total Pages: 549
Release: 2012-12-06
Genre: Technology & Engineering
ISBN: 9401155887

This volume contains the selected papers of the first I.D.M.M.E. conference on 'Integrated Design and Manufacturing in Mechanical Engineering', held in Nantes from 15-17 April 1996. Its objective was to discuss the questions related to the definition of the optimal design and manufacturing processes and to their integration through coherent methodologies in adapted environments. The initiative of the Conference and the organization thereof, is mainly due to the efforts of the french PRIMECA group (Pool of Computer Resources for Mechanics) started eight years ago. We were able to attract the internationru community with the support of the International Institution for Production Engineering Research (C.I.R.P.). The conference brought together two hundred and fifty specialists from around the world. About ninety papers and twenty posters were presented covering three main topics : optimization and evaluation of the product design process, optimization and evaluation of the manufacturing systems and methodological aspects.

Knowledge Intensive CAD

Knowledge Intensive CAD
Author: Martti Mäntylä
Publisher: Springer
Total Pages: 338
Release: 2016-01-09
Genre: Technology & Engineering
ISBN: 0387349308

Knowledge-Intensive CAD clarifies and elaborates the concepts of knowledge-intensive design and CAD. In today's advanced manufacturing environment, CAD systems should not only assist designers and engineers during product design, but also in design information for use in later stages of the process such as production, distribution and operation. This book focuses on the sharing of knowledge across life-cycle stages and organizational boundaries.