Impacts of Controlling Reactivity and Temperature on Advanced Study of Secondary Organic Aerosol Formation

Impacts of Controlling Reactivity and Temperature on Advanced Study of Secondary Organic Aerosol Formation
Author: Mary Elizabeth Kacarab
Publisher:
Total Pages: 131
Release: 2016
Genre: Aerosols
ISBN: 9781369088045

Secondary organic aerosol (SOA) is formed via the oxidation of volatile organic compounds emitted to the atmosphere from both biogenic and anthropogenic sources. Due to the complexity of atmospheric composition and range of ambient conditions, aerosol models, which are mostly based off observed yields from controlled laboratory chamber experiments, greatly underestimate global SOA formation. To increase the understanding of the formation and properties of ambient SOA, it is imperative to explore ways to improve the complexity of chamber studies while still maintaining a level of control not found outside of the laboratory.

Laboratory Experiments and Modeling for Interpreting Field Studies of Secondary Organic Aerosol Formation Using an Oxidation Flow Reactor

Laboratory Experiments and Modeling for Interpreting Field Studies of Secondary Organic Aerosol Formation Using an Oxidation Flow Reactor
Author:
Publisher:
Total Pages: 46
Release: 2016
Genre:
ISBN:

This grant was originally funded for deployment of a suite of aerosol instrumentation by our group in collaboration with other research groups and DOE/ARM to the Ganges Valley in India (GVAX) to study aerosols sources and processing. Much of the first year of this grant was focused on preparations for GVAX. That campaign was cancelled due to political reasons and with the consultation with our program manager, the research of this grant was refocused to study the applications of oxidation flow reactors (OFRs) for investigating secondary organic aerosol (SOA) formation and organic aerosol (OA) processing in the field and laboratory through a series of laboratory and modeling studies. We developed a gas-phase photochemical model of an OFR which was used to 1) explore the sensitivities of key output variables (e.g., OH exposure, O3, HO2/OH) to controlling factors (e.g., water vapor, external reactivity, UV irradiation), 2) develop simplified OH exposure estimation equations, 3) investigate under what conditions non-OH chemistry may be important, and 4) help guide design of future experiments to avoid conditions with undesired chemistry for a wide range of conditions applicable to the ambient, laboratory, and source studies. Uncertainties in the model were quantified and modeled OH exposure was compared to tracer decay measurements of OH exposure in the lab and field. Laboratory studies using OFRs were conducted to explore aerosol yields and composition from anthropogenic and biogenic VOC as well as crude oil evaporates. Various aspects of the modeling and laboratory results and tools were applied to interpretation of ambient and source measurements using OFR. Additionally, novel measurement methods were used to study gas/particle partitioning. The research conducted was highly successful and details of the key results are summarized in this report through narrative text, figures, and a complete list of publications acknowledging this grant.

Environmental Simulation Chambers: Application to Atmospheric Chemical Processes

Environmental Simulation Chambers: Application to Atmospheric Chemical Processes
Author: Ian Barnes
Publisher: Springer Science & Business Media
Total Pages: 492
Release: 2006-01-13
Genre: Nature
ISBN: 9781402042317

The book gives in the first instance descriptions of different types of so-called environment chambers or photoreactors used mainly for the simulation and/or investigation of important chemical processes occurring in the atmosphere. The types of reactor described include outdoor and indoor chambers, temperature regulated chambers and glass and Teflon foil chambers The practical use of chambers is demonstrated in contributions by leading scientists in the field of atmospheric chemistry using, in many cases, current results. The types of atmospherically relevant investigations described include the measurement of reactivities, the measurement of radicals, the measurement of photolysis frequencies and products, kinetic and product studies on the oxidation of different types of hydrocarbons by important oxidant species (OH, N03, 03), formation of secondary organic aerosol from hydrocarbon oxidation etc. A special section includes contributions from eastern European countries which highlight some of the environmental research being performed in these countries. An abridged version of a specially commissioned review by the JRC Ispra on the status of environmental research in eastern European countries is also included in this section.

Carbonaceous Aerosol Study Using Advanced Particle Instrumentation

Carbonaceous Aerosol Study Using Advanced Particle Instrumentation
Author: Li Qi
Publisher:
Total Pages: 250
Release: 2010
Genre: Aerosols
ISBN:

A study of the evolution of carbonaceous aerosol in the atmosphere was conducted with special focus on primary biomass burning and secondary organic aerosol (SOA) processing. The work is broken down into two major components: the organic aerosol mass released from biomass burning and the evolution of SOA with special emphasis on formation routes. The biomass burning work explored the evolution of organic aerosol emissions as a function of modified combustion efficiency with correlations drawn between levoglucosan emissions and wood-type, combustion type (flaming, mixed, smoldering) using high resolution aerosol mass spectrometry. The SOA work includes insights into the mechanism for SOA formation from aromatics including the impacts of temperature and particle-aging. This work conclusively demonstrates that gas-particle partitioning theory combined with enthalpies of formation are insufficient to model the formation of SOA as a function of time; that the presence of secondary reactions, in both the particle and gas-phase continue to evolve the aerosol beyond that typically simulated in environmental chambers; and that current mechanisms for SOA formation from aromatics fail to explain isotopically labeled experiments while conclusively ruling out the importance of organic nitrate products.

Anthropogenic Influence on the Fate of Secondary Organic Aerosol

Anthropogenic Influence on the Fate of Secondary Organic Aerosol
Author: Dongyu Wang
Publisher:
Total Pages: 0
Release: 2018
Genre:
ISBN:

Oxidation of volatile organic compounds (VOC) in the atmosphere leads to the formation of secondary organic aerosol (SOA), which can have extensive impacts on air quality, health, and climate. Existing air quality models used to describe the fate of ambient organic aerosol tend to underpredict the aerosol oxidation state. In addition, modeled concentrations of nitrogen oxides (NO [subscript x]) and other reactive nitrogen compounds (NO [subscript y]), including alkyl nitrates, often deviate from field observations. Certain SOA formation pathways, SOA ageing mechanisms, and alkyl nitrate decay mechanisms may be missing. Recent field studies show that NO [subscript x]-mediated heterogeneous production of nitryl chloride, ClNO2, could provide a ubiquitous source for chlorine atoms. Little is known about the role of chlorine atoms in SOA formation and ageing, or their interaction with other anthropogenic emissions found in polluted environments, where alkane oxidation chemistry is important. Environmental chamber experiments are carried out to address knowledge gaps in atmospheric chlorine and alkane oxidation chemistry. Results show that chlorine-initiated oxidation of isoprene leads to SOA formation, organic chloride formation, and possibly secondary HO [subscript x] chemistry. Alkane-derived alkyl nitrate compounds are found not to hydrolyze appreciably in humid environments or in the presence of acidic aerosol. Uptake of inorganic nitrate and inorganic chloride are observed in the presence of deliquescent particles. Chlorine-initiated oxidation of linear alkanes is shown to result in prompt SOA formation and delayed organic chloride formation, which is enabled by the addition of chlorine radical to dihydrofuran, a heterogeneously produced multi-generational oxidation product. Improvements are made for the detection of organic chloride using aerosol mass spectrometry, and for aerosol volatility measurements using temperature programmed thermal desorption techniques. A two-dimensional thermogram framework is developed to visualize aerosol composition, aerosol volatility, and thermal fragmentation simultaneously

Formation and Chemical Evolution of Secondary Organic Aerosol from Aqueous-phase Reactions of Atmospheric Phenols

Formation and Chemical Evolution of Secondary Organic Aerosol from Aqueous-phase Reactions of Atmospheric Phenols
Author: Lu Yu
Publisher:
Total Pages:
Release: 2016
Genre:
ISBN: 9781339824093

Secondary organic aerosol (SOA) is formed and transformed in atmospheric aqueous phases (e.g., cloud and fog droplets and deliquesced airborne particles containing small amounts of water) through a multitude of chemical and physical processes. Understanding the formation and transformation processes of SOA via aqueous-phase reactions is important for properly presenting its atmospheric evolution pathways in models and for elucidating its climate and health effects. Phenolic compounds, which are emitted in significant amounts from biomass burning, can undergo fast reactions in atmospheric aqueous phases to form secondary organic aerosol (aqSOA). In this study, we investigate the formation and evolution of phenol (C6H6O), guaiacol (C7H8O2; 2-methoxyphenol) and syringol (C8H10O3; 2,6-dimethoxyphenol) and with two major aqueous phase oxidants -- the triplet excited state of an aromatic carbonyl (3C*) and hydroxyl radical (·OH) - and interpret the reaction mechanisms. In addition, given that dissolved organic matter (DOM) is an important component of fog and cloud water and that it can undergo aqueous reactions to form more oxidized, less volatile species, we further investigate the photochemical processing of DOM in fog water to gain insights into the aqueous-phase processing of organic aerosol (OA) in the atmosphere. In Chapter 2, we thoroughly characterize the bulk chemical and molecular compositions of phenolic aqSOA formed at half-life (t[subscript 1/2]), and interpret the formation mechanisms. We find that phenolic aqSOA formed at t[subscript 1/2] is highly oxygenated with atomic oxygen-to-carbon ratio (O/C) in the range of 0.85-1.23. Dimers, higher oligomers (up to hexamers), functionalized monomers and oligomers with carbonyl, carboxyl, and hydroxyl groups, and small organic acids are detected. Compared with ·OH-mediated reactions, reactions mediated by 3C* are faster and produce more oligomers and hydroxylated species at t[subscript1/2]. We also find that aqSOA shows enhanced light absorption in the UV-vis region, suggesting that aqueous-phase reactions of phenols are an important source of secondary brown carbon in the atmosphere, especially in regions impacted by biomass burning. In Chapter 3, we investigate the chemical evolution of phenolic aqSOA via aqueous-phase reactions on the molecular level and interpret the aging mechanisms. Our results indicate that oligomerization is an important aqueous reaction pathway for phenols, especially during the initial stage of photooxidation. Functionalization and fragmentation become dominant at later stages, forming a variety of functionalized aromatic and ring-opening products with higher carbon oxidation states. Fragmentation reactions eventually dominate the photochemical evolution of phenolic aqSOA, forming a large number of highly oxygenated ring-opening molecules. In addition, phenolic aqSOA has a wide range of saturation vapor pressures (C*), varying from 10−20 [mu]g m−3 for functionalized phenolic oligomers to 10 [mu]g m−3 for ring-opening species with number of carbon less than 6. The detection of abundant extremely low volatile organic compounds (ELVOC) indicates that aqueous reactions of phenolic compounds are likely an important source of ELVOC in the atmosphere. Chapter 3 investigates the molecular transformation with aging based on the characterization of three aqSOA filter samples collected at the defined time intervals of the photoreaction. However, the chemical evolution of aqSOA products with hours of illumination at a higher time resolution is largely unknown. In Chapter 4, we investigate the chemical evolution of aqSOA at a 1-min time resolution based on high-resolution aerosol mass spectrometer (AMS) analysis. This is important for understanding the continuous evolution of phenolic aqSOA with aging as well as for elucidating the formation and transformation of different generations of products. Our results suggest that dimer and higher-order oligomers (trimers, tetramers, etc.) are formed continuously during the first 1-2 hours of photoreaction but show a gradual decrease afterwards. Functionalized derivatives grow at a later time and then gradually decrease. Highly oxidized ring-opening species continuously increase over the course of reactions. Positive matrix factorization (PMF) analysis of the AMS spectra of phenolic aqSOA identifies multiple factors, representing different generations of products. The 1st-generation products include dimers, higher-order oligomers and their oxygenated derivatives. The 2nd-generation products include oxygenated monomeric derivatives. The 3rd-generation products include highly oxidized ring-opening species. In Chapter 5, we investigate the evolution of dissolved organic matter (DOM) in fog water. Our results show that the mass concentration of DOM[subscript OA] (i.e., low-volatility DOM in fog water) is enhanced over the course of illumination, with continuous increase of O/C and atomic nitrogen-to-carbon ratio (N/C). The increase of DOM[subscript OA] is due to the incorporation of oxygen- and nitrogen-containing functional groups into the molecules. The aqueous aging of DOM[subscript OA] can be modeled as a linear combination of the dynamic variations of 3 factors using PMF analysis. Factor 1 is chemically similar to the DOM[subscript OA] before illumination, which is quickly reacted away. Factor 2 is representative of an intermediate component, which is first formed and then transformed, and O/C of Factor 2 is intermediate between that of Factor 1 and Factor 3. Factor 3 represents highly oxidized final products, which is continuously formed during illumination. Fog DOM absorbs significantly in the tropospheric sunlight wavelengths, but this absorption behavior stays almost constant over the course of illumination, despite the significant change in chemical composition.