IBM SAN Volume Controller Best Practices and Performance Guidelines

IBM SAN Volume Controller Best Practices and Performance Guidelines
Author: Anil K Nayak
Publisher: IBM Redbooks
Total Pages: 594
Release: 2021-10-13
Genre: Computers
ISBN: 0738459593

This IBM® Redbooks® publication describes several of the preferred practices and describes the performance gains that can be achieved by implementing the IBM SAN Volume Controller powered by IBM Spectrum® Virtualize V8.4. These practices are based on field experience. This book highlights configuration guidelines and preferred practices for the storage area network (SAN) topology, clustered system, back-end storage, storage pools, and managed disks, volumes, Remote Copy services, and hosts. Then, it provides performance guidelines for IBM SAN Volume Controller, back-end storage, and applications. It explains how you can optimize disk performance with the IBM System Storage Easy Tier® function. It also provides preferred practices for monitoring, maintaining, and troubleshooting IBM SAN Volume Controller. This book is intended for experienced storage, SAN, and IBM SAN Volume Controller administrators and technicians. Understanding this book requires advanced knowledge of the IBM SAN Volume Controller, IBM FlashSystem, and SAN environments.

IBM TS7700 Release 4.2 Guide

IBM TS7700 Release 4.2 Guide
Author: Larry Coyne
Publisher: IBM Redbooks
Total Pages: 988
Release: 2019-04-19
Genre: Computers
ISBN: 073845737X

This IBM® Redbooks® publication covers IBM TS7700 R4.2. The IBM TS7700 is part of a family of IBM Enterprise tape products. This book is intended for system architects and storage administrators who want to integrate their storage systems for optimal operation. Building on over 20 years of virtual tape experience, the TS7760 now supports the ability to store virtual tape volumes in an object store. The TS7700 has supported off loading to physical tape for over two decades. Off loading to physical tape behind a TS7700 is utilized by hundreds of organizations around the world. Using the same hierarchical storage techniques, the TS7700 can also off load to object storage. Given object storage is cloud based and accessible from different regions, the TS7760 Cloud Storage Tier support essentially allows the cloud to be an extension of the grid. As of the release of this document, the TS7760C supports the ability to off load to IBM Cloud Object Storage as well as Amazon S3. To learn about the TS7760 cloud storage tier function, planning, implementation, best practices, and support see IBM Redpaper IBM TS7760 R4.2 Cloud Storage Tier Guide, redp-5514 at: http://www.redbooks.ibm.com/abstracts/redp5514.html The IBM TS7700 offers a modular, scalable, and high-performance architecture for mainframe tape virtualization for the IBM Z® environment. It is a fully integrated, tiered storage hierarchy of disk and tape. This storage hierarchy is managed by robust storage management microcode with extensive self-management capability. It includes the following advanced functions: Improved reliability and resiliency Reduction in the time that is needed for the backup and restore process Reduction of services downtime that is caused by physical tape drive and library outages Reduction in cost, time, and complexity by moving primary workloads to virtual tape More efficient procedures for managing daily backup and restore processing Infrastructure simplification through reduction of the number of physical tape libraries, drives, and media TS7700 delivers the following new capabilities: TS7760C supports the ability to off load to IBM Cloud Object Storage as well as Amazon S3 8-way Grid Cloud consisting of any generation of TS7700 Synchronous and asynchronous replication Tight integration with IBM Z and DFSMS policy management Optional Transparent Cloud Tiering Optional integration with physical tape Cumulative 16Gb FICON throughput up to 4.8GB/s 8 IBM Z hosts view up to 496 8 equivalent devices Grid access to all data independent of where it exists The TS7760T writes data by policy to physical tape through attachment to high-capacity, high-performance IBM TS1150 and IBM TS1140 tape drives installed in an IBM TS4500 or TS3500 tape library. The TS7760 models are based on high-performance and redundant IBM POWER8® technology. They provide improved performance for most IBM Z tape workloads when compared to the previous generations of IBM TS7700.

IBM TS7700 Series DS8000 Object Store User's Guide Version 2.0

IBM TS7700 Series DS8000 Object Store User's Guide Version 2.0
Author: Lourie Goodall
Publisher: IBM Redbooks
Total Pages: 36
Release: 2021-03-22
Genre: Computers
ISBN: 0738459542

The IBM® TS7700 features a functional enhancement that allows for the TS7700 to act as an object store for transparent cloud tiering with IBM DS8000® (DS8K), DFSMShsm (HSM), and native DFSMSdss (DSS). This function can be used to move data sets directly from DS8000 to TS7700. This IBM Redpaper publication describes the client value, and how DFSMS, DS8000, and TS7700 are set up to enable and use the function.

z/OS Version 1 Release 12 Implementation

z/OS Version 1 Release 12 Implementation
Author: Paul Rogers
Publisher: IBM Redbooks
Total Pages: 888
Release: 2011-04-27
Genre: Computers
ISBN: 0738434981

This IBM® Redbooks® publication describes changes in installation and migration when migrating from a current z/OS® V1R10 and z/OS V1R11 to z/OS V1R12. Also described are tasks to prepare for the installation of z/OS V1R12, including ensuring that driving system and target system requirements are met, and coexistence requirements are satisfied. New migration actions are introduced in z/OS V1R12. This book focuses on identifying some of the new migration actions that must be performed for selected elements when migrating to z/OS V1R12. This book describes the following enhancements: z/OS V1R12 installation, HiperDispatch, System Logger, Auto-reply to WTORs, Real Storage Manager (RSM) DFSMS, DFSORT, Services aids, z/OS Infoprint Server, TSO/E, RMFTM, Language Environment®, BCP allocation XML System Services, z/OS UNIX® System Services, BCP supervisor, Extended Address Volumes HyperSwap®. BCPii, (de)ciphering, Predictive Failure Analysis, C language, Hardware instrumentation services FICON® dynamic channel-path management, Workload Manager, SDSF, JES2, JES3, SMF, GRS, XCF, HCD Unicode, Capacity provisioning, RRS, Parallel subsystems initialization z/OS Management Facility (z/OSMF)

Implementing REXX Support in SDSF

Implementing REXX Support in SDSF
Author: Lydia Parziale
Publisher: IBM Redbooks
Total Pages: 340
Release: 2007-06-26
Genre: Computers
ISBN: 073848914X

The Restructured Extended Executor (REXX) language is a procedural language that allows you to write programs and algorithms in a clear and structural way. It is an interpreted and compiled language, and you do not have to compile a REXX command list before executing it. With IBM z/OS V1.9, you can harness the versatility of REXX to interface and interact with the power of SDSF. A new function called REXX with SDSF is available that provides access to SDSF functions through the use of the REXX programming language. This REXX support provides a simple and powerful alternative to using SDSF batch. This IBM Redbooks publication describes the new support and provides sample REXX execs that exploit the new function and that perform real-world tasks related to operations, systems programming, system administration, and automation. This book complements the SDSF documentation, which is primarily reference information. The audience for this book includes operations support, system programmers, automation support, and anyone with a desire to access SDSF using a REXX interface.

DS8800 Performance Monitoring and Tuning

DS8800 Performance Monitoring and Tuning
Author: Gero Schmidt
Publisher: IBM Redbooks
Total Pages: 726
Release: 2012-09-14
Genre: Computers
ISBN: 0738436836

This IBM® Redbooks® publication provides guidance about how to configure, monitor, and manage your IBM System Storage® DS8800 and DS8700 storage systems to achieve optimum performance. It describes the DS8800 and DS8700 performance features and characteristics, including IBM System Storage Easy Tier® and DS8000® I/O Priority Manager. It also describes how they can be used with the various server platforms that attach to the storage system. Then, in separate chapters, we detail specific performance recommendations and discussions that apply for each server environment, as well as for database and DS8000 Copy Services environments. We also outline the various tools available for monitoring and measuring I/O performance for different server environments, as well as describe how to monitor the performance of the entire DS8000 storage system. This book is intended for individuals who want to maximize the performance of their DS8800 and DS8700 storage systems and investigate the planning and monitoring tools that are available. The IBM System Storage DS8800 and DS8700 storage system features, as described in this book, are available for the DS8700 with Licensed Machine Code (LMC) level 6.6.2x.xxx or higher and the DS8800 with Licensed Machine Code (LMC) level 7.6.2x.xxx or higher. For information about optimizing performance with the previous DS8000 models, DS8100 and DS8300, see the following IBM Redbooks publication: DS8000 Performance Monitoring and Tuning, SG24-7146.

IBM System Storage DS8000 Performance Monitoring and Tuning

IBM System Storage DS8000 Performance Monitoring and Tuning
Author: Axel Westphal
Publisher: IBM Redbooks
Total Pages: 600
Release: 2016-04-07
Genre: Computers
ISBN: 073844149X

This IBM® Redbooks® publication provides guidance about how to configure, monitor, and manage your IBM DS8880 storage systems to achieve optimum performance, and it also covers the IBM DS8870 storage system. It describes the DS8880 performance features and characteristics, including hardware-related performance features, synergy items for certain operating systems, and other functions, such as IBM Easy Tier® and the DS8000® I/O Priority Manager. The book also describes specific performance considerations that apply to particular host environments, including database applications. This book also outlines the various tools that are available for monitoring and measuring I/O performance for different server environments, and it describes how to monitor the performance of the entire DS8000 storage system. This book is intended for individuals who want to maximize the performance of their DS8880 and DS8870 storage systems and investigate the planning and monitoring tools that are available. The IBM DS8880 storage system features, as described in this book, are available for the DS8880 model family with R8.0 release bundles (Licensed Machine Code (LMC) level 7.8.0).

Introduction and Implementation of Data Reduction Pools and Deduplication

Introduction and Implementation of Data Reduction Pools and Deduplication
Author: Jon Tate
Publisher: IBM Redbooks
Total Pages: 124
Release: 2019-07-30
Genre: Computers
ISBN: 0738457310

Continuing its commitment to developing and delivering industry-leading storage technologies, IBM® introduces Data Reduction Pools (DRP) and Deduplication powered by IBM SpectrumTM Virtualize, which are innovative storage features that deliver essential storage efficiency technologies and exceptional ease of use and performance, all integrated into a proven design. This book discusses Data Reduction Pools (DRP) and Deduplication and is intended for experienced storage administrators who are fully familiar with IBM Spectrum Virtualize, SAN Volume Controller, and the Storwize family of products.