Hydraulic Hose Fittings Hs 150 2000
Download Hydraulic Hose Fittings Hs 150 2000 full books in PDF, epub, and Kindle. Read online free Hydraulic Hose Fittings Hs 150 2000 ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
| Author | : Hydraulic Hose and Hose Fittings Committee |
| Publisher | : |
| Total Pages | : 0 |
| Release | : 1999 |
| Genre | : |
| ISBN | : |
This SAE Standard provides general and dimensional specifications for the most common hose fittings used in conjunction with hydraulic hoses specified in SAE J517 and utilized in hydraulic systems on mobile and stationary equipment. The general specifications contained in Sections 1 through 15 are applicable to all hydraulic hose fittings and supplement the detailed specifications for the 100R-series fittings contained in the later sections of this document. This document shall be utilized as a procurement document only to the extent agreed upon by the manufacturer and user. Refer to SAE J517 for specifications of hose and information on hose assemblies. SAE J1273 contains information on application factors affecting hose fittings, hose, and hose assemblies. NOTE: THE RATED WORKING PRESSURE OF A HOSE ASSEMBLY COMPRISING SAE J516 FITTINGS AND SAE J517 HOSE SHALL NOT EXCEED THE LOWER OF THE TWO WORKING PRESSURE RATED VALUES. The following are hose fitting types contained in this document: a. Male dryseal pipe thread type hose fittings shall be as shown in Figures 1A to 1C for the respective styles, and in Tables 1A to 1M for the applicable hoses and sizes. b. Male straight thread O-ring boss type hose fittings shall be as shown in Figures 2A and 2B for the respective styles, and in Tables 2A to 2H for the applicable hoses and sizes. c. Male 37-degree flared type hose fittings shall be as shown in Figures 3A to 3C for the respective styles, and in Tables 3A to 3L for the applicable hoses and sizes. d. Female 37-degree flared type hose fittings shall be as shown in Figures 4A to 7B for the respective styles and shapes, and in Tables 4A to 4M for the applicable hoses and sizes. e. Male 45-degree flared type hose fittings shall be as shown in Figures 8A and 8B for the respective styles, and in Tables 5A to 5E for the applicable hoses and sizes. f. Female 45-degree flared type hose fittings shall be as shown in Figures 9A to 12B for the respective styles and shapes, and in Tables 6A to 6E for the applicable hoses and sizes. g. Male flareless type hose fittings shall be as shown in Figures 13A and 13B for the respective styles, and in Tables 7A and 7B for the applicable hoses and sizes. h. Female flareless type hose fittings shall be as shown in Figures 14A to 14C for the respective styles, and in Tables 8A and 8B for the applicable hoses and sizes. i. 4-bolt split flange type hose fittings shall be as shown in Figures 15A to 21C for the respective styles and shapes, and in Tables 9A to 9I2 for the applicable hoses and sizes. j. Female O-ring face seal hose fittings shall be as shown in Figures 22A to 25B for the respective styles, and Tables 10A to 10L for the applicable hoses and sizes. It is recommended that where step sizes or additional types of fittings are required, they be designed to conform with the specifications of this document insofar as they may apply. The following general specifications shall supplement the dimensional data contained in the tables with respect to all unspecified detail.
| Author | : Hydraulic Hose and Hose Fittings Committee |
| Publisher | : |
| Total Pages | : 0 |
| Release | : 1999 |
| Genre | : |
| ISBN | : |
This SAE standard provides general and dimensional specifications for formed tube ends and hose fittings. These connections are intended for general applications in low pressure automotive and hydraulic systems on automotive, industrial, and commercial products. The fittings shown in Figures 2 and 3 are intended to be retained by hose clamps as specified in SAE J1508. It is recommended that where step sizes or additional types of fittings are required, they be designed to conform with the specifications of this document insofar as they may apply. The following general specifications shall supplement the dimensional data contained in the tables with respect to all unspecified detail.
| Author | : Hydraulic Tube Fittings Committee |
| Publisher | : |
| Total Pages | : 0 |
| Release | : 1993 |
| Genre | : |
| ISBN | : |
This coding system is intended to provide a convenient means of identifying the various tube, pipe, and hose fittings and of transmitting technical or engineering information relating to them wherever drawings or other pictorial media may not be readily available. The code has been kept flexible to permit expansion to cover new fitting categories or styles and, if the need develops, the inclusion of materials. The system is also compatible with automatic data processing equipment.It is not intended that this code should supersede established systems or means of identification. However, because the SAE code for automotive flare fittings shown in SAE J512 is also applicable to corresponding refrigeration fittings in SAE J513, both an SAE code and the existing code ANSI B70.1, are included throughout SAE J513. Therefore, it should be the prerogative of the user to apply that code which best satisfies his requirements.
| Author | : Hydraulic Hose and Hose Fittings Committee |
| Publisher | : |
| Total Pages | : 0 |
| Release | : 1975 |
| Genre | : |
| ISBN | : |
This standard is intended to document general and dimensional specifications for the various types and styles of hose fittings used in conjunction with hydraulic hoses specified in SAE J517, in hydraulic systems on construction and industrial equipment and commercial products. Also included are adapter unions. The basic design and dimensional features of the fittings shown are derived from existing industry practice and include the following types:Male Dryseal pipe thread type hose fittings shall be as shown in Figs. 1A-1C for the respective styles, and in Tables 1A-1F for the applicable hoses and sizes.Male straight thread O-ring boss type hose fittings shall be as shown in Figs. 2A and 2B for the respective styles, and in Tables 2A-2C for the applicable hoses and sizes.Male 37-deg flared type hose fittings shall be as shown in Figs. 3A-3C for the respective styles, and in Tables 3A-3F for the applicable hoses and sizes.Female 37-deg flared type hose fittings shall be as shown in Figs. 4A-7B for the respective styles and shapes, and in Tables 4A-4F for the applicable hoses and sizes.Male 45-deg flared type hose fittings shall be as shown in Figs. 8A and 8B for the respective styles, and in Tables 5A-5D for the applicable hoses and sizes.Female 45-deg flared type hose fittings shall be as shown in Figs. 9A-12B for the respective styles and shapes, and in Tables 6A-6D for the applicable hoses and sizes.Male flareless type hose fittings shall be as shown in Figs. 13A and 13B for the respective styles, and in Tables 7A and 7B for the applicable hoses and sizes.Female flareless type hose fittings shall be as shown in Figs. 14A-14C for the respective styles, and in Tables 8A and 8B for the applicable hoses and sizes.4-bolt split flange type hose fittings shall be as shown in Figs. 15A-21C for the respective styles and shapes, and in Tables 9A-9D for the applicable hoses and sizes.Adapter unions shall be as shown in Figs. 22-25 and Table 10.It is recommended that where step sizes or additional types of fittings are required, they be designed to conform with the specifications of this standard insofar as they may apply.The following general specifications shall supplement the dimensional data contained in the tables with respect to all unspecified detail.
| Author | : Hydraulic Tube Fittings Committee |
| Publisher | : |
| Total Pages | : 0 |
| Release | : 1998 |
| Genre | : |
| ISBN | : |
This SAE Standard specifies uniform methods for the testing and performance evaluation of threaded metallic tube connections and stud ends of ports for hydraulic fluid power. Tests outlined within this document are independent of each other and document the method to follow for each test; see the appropriate component SAE or ISO standard for the test(s) requirements and the performance criteria. Appendix A of SAE J1644 is normative; Appendix B is informative.
| Author | : |
| Publisher | : |
| Total Pages | : 830 |
| Release | : 1980 |
| Genre | : Highway research |
| ISBN | : |
| Author | : Hydraulic Hose and Hose Fittings Committee |
| Publisher | : |
| Total Pages | : 0 |
| Release | : 2009 |
| Genre | : |
| ISBN | : |
This SAE Standard covers general and performance specifications for hydraulic hose fittings of the styles, types, and classes defined in Section 3 and used in conjunction with nonmetallic flexible hoses for marine applications. This document does not ensure compatibility between manufacturers of hydraulic hose and hydraulic hose fittings. Compatibility is the responsibility of the hydraulic hose assembly manufacturer.Reaffirm.
| Author | : Hydraulic Hose and Hose Fittings Committee |
| Publisher | : |
| Total Pages | : 0 |
| Release | : 2004 |
| Genre | : |
| ISBN | : |
This SAE Standard covers general and performance specifications for hydraulic hose fittings of the styles, types, and classes defined in Section 3 and used in conjunction with nonmetallic flexible hoses for marine applications. This document does not ensure compatibility between manufacturers of hydraulic hose and hydraulic hose fittings. Compatibility is the responsibility of the hydraulic hose assembly manufacturer.
| Author | : American National Standards Institute |
| Publisher | : |
| Total Pages | : 32 |
| Release | : 1986 |
| Genre | : Hose |
| ISBN | : |
| Author | : Hydraulic Hose and Hose Fittings Committee |
| Publisher | : |
| Total Pages | : 0 |
| Release | : 2021 |
| Genre | : |
| ISBN | : |
SAE J1273 provides guidelines for selection, routing, fabrication, installation, replacement, maintenance, and storage of hose and hose assemblies for hydraulic fluid-power systems. Many of these SAE Recommended Practices also may be suitable for other hoses and systems. Verbiage added to 6.6 in order to eliminate the option of repairing hose assemblies in the field.
