Geotechnical Centrifuge Technology

Geotechnical Centrifuge Technology
Author: R.N. Taylor
Publisher: CRC Press
Total Pages: 315
Release: 2018-10-08
Genre: Architecture
ISBN: 1482269325

This book provides a thorough review of this powerful and sophisticated technique for modelling soil structure interactions. It has been written by an international team of authors.

Physical Models

Physical Models
Author: Bill Addis
Publisher: John Wiley & Sons
Total Pages: 70
Release: 2020-11-02
Genre: Technology & Engineering
ISBN: 3433032572

Physical models have been, and continue to be used by engineers when faced with unprecedented challenges, when engineering science has been non-existent or inadequate, and in any other situation when the engineer has needed to raise their confidence in a design proposal to a sufficient level to begin construction. For this reason, models have mostly been used by designers and constructors of highly innovative projects, when previous experience has not been available. The book covers the history of using of physical models in the design and development of civil and building engineering projects including bridges in the mid-18th century, William Fairbairn?s Britannia bridge in the 1840s, the masonry Aswan Dam in the 1890s, concrete dams in the 1920s, thin concrete shell roofs and the dynamic behaviour of tall buildings in earthquakes from the 1930s, tidal flow in estuaries and the acoustics of concert halls from the 1950s, and cable-net and membrane structures in the 1960s. Traditionally, progress in engineering has been attributed to the creation and use of engineering science, the understanding materials properties and the development of new construction methods. The book argues that the use of reduced scale models have played an equally important part in the development of civil and building engineering. However, like the history of engineering design itself, this crucial contribution has not been widely reported or celebrated. The book concludes with reviews of the current use of physical models alongside computer models, for example, in boundary layer wind tunnels, room acoustics, seismic engineering, hydrology, and air flow in buildings.

Centrifuge Modelling for Civil Engineers

Centrifuge Modelling for Civil Engineers
Author: Gopal Madabhushi
Publisher: CRC Press
Total Pages: 320
Release: 2014-07-28
Genre: Technology & Engineering
ISBN: 0203126823

Solve Complex Ground and Foundation Problems Presenting more than 25 years of teaching and working experience in a wide variety of centrifuge testing, the author of Centrifuge Modelling for Civil Engineers fills a need for information about this field. This text covers all aspects of centrifuge modelling. Expertly explaining the basic principles, the book makes this technique accessible to practicing engineers and researchers. Appeals to Non-Specialists and Specialists Alike Civil engineers that are new to the industry can refer to this material to solve complex geotechnical problems. The book outlines a generalized design process employed for civil engineering projects. It begins with the basics, and then moves on to increasingly complex methods and applications including shallow foundations, retaining walls, pile foundations, tunnelling beneath existing pile foundations, and assessing the stability of buildings and their foundations following earthquake-induced soil liquefaction. It addresses the use of modern imaging technique, data acquisition, and modelling techniques. It explains the necessary signal processing tools that are used to decipher centrifuge test data, and introduces the reader to the specialist aspects of dynamic centrifuge modelling used to study dynamic problems such as blast, wind, or wave loading with emphasis on earthquake engineering including soil liquefaction problems. Introduces the equipment and instrumentation used in centrifuge testing Presents in detail signal processing techniques such as smoothing and filtering Provides example centrifuge data that can be used for sample analysis and interpretation Centrifuge Modelling for Civil Engineers effectively describes the equipment, instrumentation, and signal processing techniques required to make the best use of the centrifuge modelling and test data. This text benefits graduate students, researchers, and practicing civil engineers involved with geotechnical issues.

Centrifuges in Soil Mechanics

Centrifuges in Soil Mechanics
Author: W.H. Craig
Publisher: CRC Press
Total Pages: 541
Release: 2020-08-26
Genre: Technology & Engineering
ISBN: 1000151573

This book contains technical papers, presented in a discussion session at the XI International Conference on Soil Mechanics and Foundation Engineering held in San Francisco in 1985, on the role of centrifuge in geotechnical testing, with descriptions of test facilities.

Constitutive and Centrifuge Modelling: Two Extremes

Constitutive and Centrifuge Modelling: Two Extremes
Author: S. Springman
Publisher: CRC Press
Total Pages: 408
Release: 2002-01-01
Genre: Technology & Engineering
ISBN: 9789058093615

The extremes of constitutive and centrifuge modelling are explored here, with a range of lectures addressing specific areas of these two types of modelling as well as on specific design problems and the themes of failure, deformations and interfaces.

EKC 2009 Proceedings of EU-Korea Conference on Science and Technology

EKC 2009 Proceedings of EU-Korea Conference on Science and Technology
Author: Joung Hwan Lee
Publisher: Springer Science & Business Media
Total Pages: 314
Release: 2010-09-17
Genre: Technology & Engineering
ISBN: 3642136249

Current research fields in science and technology were presented and discussed at the EKC2008, informing about the interests and directions of the scientists and engineers in EU countries and Korea. The Conference has emerged from the idea of bringing together EU and Korea to get to know each other better, especially in fields of science and technology. The focus of the conference is put on the topics: Computational Fluid Dynamics, Mechatronics and Mechanical Engineering, Information and Communications Technology, Life and Natural Sciences, Energy and Environmental Technology.

Sustainable Construction Materials and Technologies

Sustainable Construction Materials and Technologies
Author: Yoon-Moon Chun
Publisher: CRC Press
Total Pages: 1756
Release: 2007-05-31
Genre: Technology & Engineering
ISBN: 0415415861

The construction materials industry is a major user of the world’s resources. While enormous progress has been made towards sustainability, the scope and opportunities for improvements are significant. To further the effort for sustainable development, a conference on Sustainable Construction Materials and Technologies was held at Coventry University, Coventry, U.K., from June 11th - 13th, 2007, to highlight case studies and research on new and innovative ways of achieving sustainability of construction materials and technologies. This book presents selected, important contributions made at the conference. Over 190 papers from over 45 countries were accepted for presentation at the conference, of which approximately 100 selected papers are published in this book. The rest of the papers are published in two supplementary books. Topics covered in this book include: sustainable alternatives to natural sand, stone, and Portland cement in concrete; sustainable use of recyclable resources such as fly ash, ground municipal waste slag, pozzolan, rice-husk ash, silica fume, gypsum plasterboard (drywall), and lime in construction; sustainable mortar, concrete, bricks, blocks, and backfill; the economics and environmental impact of sustainable materials and structures; use of construction and demolition wastes, and organic materials (straw bale, hemp, etc.) in construction; sustainable use of soil, timber, and wood products; and related sustainable construction and rehabilitation technologies.

Geotechnical Modelling

Geotechnical Modelling
Author: David Muir Wood
Publisher: CRC Press
Total Pages: 499
Release: 2003-09-02
Genre: Science
ISBN: 0203477979

Modelling forms an implicit part of all engineering design but many engineers engage in modelling without consciously considering the nature, validity and consequences of the supporting assumptions. Derived from courses given to postgraduate and final year undergraduate MEng students, this book presents some of the models that form a part of the typical undergraduate geotechnical curriculum and describes some of the aspects of soil behaviour which contribute to the challenge of geotechnical modelling. Assuming a familiarity with basic soil mechanics and traditional methods of geotechnical design, this book is a valuable tool for students of geotechnical and structural and civil engineering as well as also being useful to practising engineers involved in the specification of numerical or physical geotechnical modelling.

Physical Modelling in Geotechnics

Physical Modelling in Geotechnics
Author: P. Guo
Publisher: Taylor & Francis
Total Pages: 1046
Release: 2022-11-22
Genre: Technology & Engineering
ISBN: 1351424610

Papers cover topics including: physical modelling facilities; experimental advances; seismic experimental advances; education; soil behaviour; offshore systems; cold regions; geo-environment; dynamics; earthquake effects; and strategies for disaster reduction.

Physical Modelling in Geotechnics, Volume 1

Physical Modelling in Geotechnics, Volume 1
Author: Andrew McNamara
Publisher: CRC Press
Total Pages: 776
Release: 2018-07-11
Genre: Technology & Engineering
ISBN: 0429797680

Physical Modelling in Geotechnics collects more than 1500 pages of peer-reviewed papers written by researchers from over 30 countries, and presented at the 9th International Conference on Physical Modelling in Geotechnics 2018 (City, University of London, UK 17-20 July 2018). The ICPMG series has grown such that two volumes of proceedings were required to publish all contributions. The books represent a substantial body of work in four years. Physical Modelling in Geotechnics contains 230 papers, including eight keynote and themed lectures representing the state-of-the-art in physical modelling research in aspects as diverse as fundamental modelling including sensors, imaging, modelling techniques and scaling, onshore and offshore foundations, dams and embankments, retaining walls and deep excavations, ground improvement and environmental engineering, tunnels and geohazards including significant contributions in the area of seismic engineering. ISSMGE TC104 have identified areas for special attention including education in physical modelling and the promotion of physical modelling to industry. With this in mind there is a special themed paper on education, focusing on both undergraduate and postgraduate teaching as well as practicing geotechnical engineers. Physical modelling has entered a new era with the advent of exciting work on real time interfaces between physical and numerical modelling and the growth of facilities and expertise that enable development of so called ‘megafuges’ of 1000gtonne capacity or more; capable of modelling the largest and most complex of geotechnical challenges. Physical Modelling in Geotechnics will be of interest to professionals, engineers and academics interested or involved in geotechnics, geotechnical engineering and related areas. The 9th International Conference on Physical Modelling in Geotechnics was organised by the Multi Scale Geotechnical Engineering Research Centre at City, University of London under the auspices of Technical Committee 104 of the International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE). City, University of London, are pleased to host the prestigious international conference for the first time having initiated and hosted the first regional conference, Eurofuge, ten years ago in 2008. Quadrennial regional conferences in both Europe and Asia are now well established events giving doctoral researchers, in particular, the opportunity to attend an international conference in this rapidly evolving specialist area. This is volume 1 of a 2-volume set.